[Wed Oct  5 01:50:55 2011] Detection parameters:
  Position = (240.1, 265.2) = 12 9 53.88 43 40 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.2 +/- 10.4
  Background counts = 5.8
  Rate = 0.005 +/- 0.0008

[Wed Oct  5 01:50:55 2011] Off-axis axis estimate = 4.87'
[Wed Oct  5 02:43:02 2011] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 02:43:02 2011] Initial guess for spatial extent in simple fitting = 8.86"
[Wed Oct  5 02:43:02 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.971
[Wed Oct  5 02:43:02 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 8.86"
[Wed Oct  5 03:07:24 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src6.ximg exists
[Wed Oct  5 03:07:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src6.csv
[Wed Oct  5 03:07:24 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Oct  5 03:07:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src6.csv
[Wed Oct  5 03:07:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:07:24 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Oct  5 03:07:24 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Oct  5 03:07:24 2011] Fit fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Oct  5 03:07:34 2011] Spatial fit model total counts = 122.991000, observed total counts = 123.000000
[Wed Oct  5 03:07:34 2011] Offset between fit and detection position for source 11 = 0.050682 pixels
[Wed Oct  5 03:07:34 2011] 123.703400 total counts/ 83.286400 bgd. counts: snr = 4.428708
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.050682 pixels
  Position = (240.2, 265.2) = 12 9 53.86 43 40 22.4
  Extent = 4.4 (3.0-6.0)", rotation angle = 0
  Source counts = 40.4 +/- 11.1
  Background counts = 83.3
  Rate = 0.003 +/- 0.0008
[Wed Oct  5 03:07:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:07:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:07:34 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:07:34 2011] Source does appear to be extended
[Wed Oct  5 03:07:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:55:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:55:16 2011] Initial guess for spatial extent in simple fitting = 4.41"
[Wed Oct  5 03:55:16 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.981
[Wed Oct  5 03:55:16 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 4.41"
[Wed Oct  5 04:14:21 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src6.ximg exists
[Wed Oct  5 04:14:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src6.csv
[Wed Oct  5 04:14:21 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Oct  5 04:14:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src6.csv
[Wed Oct  5 04:14:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:14:21 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Oct  5 04:14:21 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Oct  5 04:14:21 2011] Fit fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Oct  5 04:14:30 2011] Warning, spatial fit 6 centroid is now closest to src. 12
[Wed Oct  5 04:14:30 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:14:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:14:30 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:14:30 2011] Source does appear to be extended
[Wed Oct  5 04:14:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 04:53:10 2011] XMMSAS src. selection expression = ellipse(20846.810760, 23026.062200, 264.753008, 264.753008, 0.000000, X, Y)
[Wed Oct  5 04:53:10 2011] Writing source region out to fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src11_src.reg
[Wed Oct  5 04:53:10 2011] Extracting stamp from image fullrun_mos2_xmm0112551201_pi300-10000_cl_sm2.00.img.gz, (225, 250) - (255, 280)
[Wed Oct  5 04:53:10 2011] XMMSAS bgd. selection expression = annulus(20846.810760, 23026.062200, 441.255013, 882.510025, X, Y)
[Wed Oct  5 04:53:10 2011] Writing fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src11.gif
[Wed Oct  5 04:54:39 2011] Mean detx,y = (-4581.09, -2374.96) 
[Wed Oct  5 04:54:40 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 04:54:47 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 04:54:47 2011] Setting source spectrum file to fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Oct  5 04:54:47 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Oct  5 05:04:22 2011] Not generating rmf since there are only 40 counts
[Wed Oct  5 05:04:22 2011] rmf not generated due to insufficient counts
[Wed Oct  5 05:05:04 2011] Updating aperture counts using extracted products
[Wed Oct  5 05:05:04 2011] Error reading totcts from fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Oct  5 05:05:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 05:05:04 2011] Using photon index=1.80, rate=0.00281, arf fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src11.arf
[Wed Oct  5 05:05:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 05:05:04 2011] Updating source flux to 4.1e-14
[Wed Oct  5 05:05:31 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting