[Wed Sep 28 07:44:40 2011] Detection parameters:
  Position = (265.1, 231.2) = 12 43 1.05 13 12 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 466.8 +/- 26.6
  Background counts = 11.2
  Rate = 0.06 +/- 0.003

[Wed Sep 28 07:44:40 2011] Off-axis axis estimate = 5.44'
[Wed Sep 28 07:45:45 2011] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 07:45:45 2011] Initial guess for spatial extent in simple fitting = 9.15"
[Wed Sep 28 07:45:45 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.922
[Wed Sep 28 07:45:45 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.15"
[Wed Sep 28 08:16:06 2011] fullrun_pn_xmm0112551001_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep 28 08:16:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112551001_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 08:16:06 2011] fullrun_pn_xmm0112551001_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep 28 08:16:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112551001_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 08:16:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112551001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112551001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 08:16:06 2011] fullrun_pn_xmm0112551001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 08:16:06 2011] fullrun_pn_xmm0112551001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 08:16:06 2011] Fit fullrun_pn_xmm0112551001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 09:07:13 2011] Spatial fit model total counts = 494.999000, observed total counts = 495.000000
[Wed Sep 28 09:07:13 2011] Offset between fit and detection position for source 1 = 0.144778 pixels
[Wed Sep 28 09:07:13 2011] 497.694000 total counts/ 140.647000 bgd. counts: snr = 30.106492
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.144778 pixels
  Position = (265.2, 231.3) = 12 43 1.02 13 12 17.5
  Extent = 6.2 (5.7-6.8)", rotation angle = 0
  Source counts = 357.0 +/- 22.3
  Background counts = 140.6
  Rate = 0.04 +/- 0.002
[Wed Sep 28 09:07:13 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 09:07:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 09:07:13 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 09:07:13 2011] Source does appear to be extended
[Wed Sep 28 09:07:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 09:07:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 09:07:25 2011] Initial guess for spatial extent in simple fitting = 6.24"
[Wed Sep 28 09:07:25 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.069
[Wed Sep 28 09:07:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.24"
[Wed Sep 28 09:40:45 2011] fullrun_pn_xmm0112551001_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep 28 09:40:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112551001_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 09:40:45 2011] fullrun_pn_xmm0112551001_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep 28 09:40:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112551001_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 09:40:45 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112551001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112551001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 09:40:45 2011] fullrun_pn_xmm0112551001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 09:40:45 2011] fullrun_pn_xmm0112551001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 09:40:45 2011] Fit fullrun_pn_xmm0112551001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 10:28:41 2011] Spatial fit model total counts = 487.823000, observed total counts = 485.000000
[Wed Sep 28 10:28:41 2011] Offset between fit and detection position for source 1 = 0.008695 pixels
[Wed Sep 28 10:28:41 2011] 489.595000 total counts/ 132.068000 bgd. counts: snr = 31.110719
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008695 pixels
  Position = (265.2, 231.3) = 12 43 1.02 13 12 17.5
  Extent = 6.2 (5.6-6.7)", rotation angle = 0
  Source counts = 357.5 +/- 22.1
  Background counts = 132.1
  Rate = 0.04 +/- 0.002
[Wed Sep 28 10:28:41 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 10:28:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 10:28:41 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 10:28:41 2011] Source does appear to be extended
[Wed Sep 28 10:28:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 10:28:56 2011] XMMSAS src. selection expression = ellipse(23027.027000, 20072.315400, 373.004411, 373.004411, 0.000000, X, Y)
[Wed Sep 28 10:28:56 2011] Writing source region out to fullrun_pn_xmm0112551001_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep 28 10:28:56 2011] Extracting stamp from image fullrun_pn_xmm0112551001_pi300-10000_cl_sm2.00.img.gz, (244, 210) - (287, 253)
[Wed Sep 28 10:28:56 2011] XMMSAS bgd. selection expression = annulus(23027.027000, 20072.315400, 621.674018, 1243.348036, X, Y)
[Wed Sep 28 10:28:56 2011] Writing fullrun_pn_xmm0112551001_pi300-10000_pass1_cl_src1.gif
[Wed Sep 28 10:29:02 2011] Mean detx,y = (4284.24, -2255.41) 
[Wed Sep 28 10:29:06 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 10:29:28 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 10:29:28 2011] Setting source spectrum file to fullrun_pn_xmm0112551001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 10:29:28 2011] Setting bgd. spectrum file to fullrun_pn_xmm0112551001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep 28 11:16:44 2011] Updating aperture counts using extracted products
[Wed Sep 28 11:16:44 2011] Error reading totcts from fullrun_pn_xmm0112551001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 11:16:46 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 11:16:46 2011] Using photon index=1.80, rate=0.0358, arf fullrun_pn_xmm0112551001_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 11:16:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 11:16:46 2011] Updating source flux to 1.3e-13
[Wed Sep 28 11:17:58 2011] Reading fit data from xmm0112551001/analysis//spectral/fullrun_pn_xmm0112551001_pi300-10000_pass1_cl_src1_pl.csv
[Wed Sep 28 11:17:58 2011] Spectral fit parameter nH value = 1.84158e+20
[Wed Sep 28 11:17:58 2011] Spectral fit parameter PhoIndex value = 1.92545
[Wed Sep 28 11:17:58 2011] Failed to get F(0.3-8.0) from xmm0112551001/analysis//spectral/fullrun_pn_xmm0112551001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 11:17:58 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 11:17:58 2011] Using Nh = 1.8e+20, photon index=1.93, rate=0.0358, arf fullrun_pn_xmm0112551001_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 11:17:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 11:17:58 2011] Updating source flux to 1.3e-13