[Wed Sep 28 13:35:49 2011] Detection parameters:
  Position = (410.6, 352.0) = 12 29 31.92 13 44 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.4 +/- 18.9
  Background counts = 44.1
  Rate = 0.02 +/- 0.002

[Wed Sep 28 13:35:49 2011] Off-axis axis estimate = 9.01'
[Wed Sep 28 13:42:57 2011] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 13:42:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 13:42:57 2011] Initial guess for spatial extent in simple fitting = 10.93"
[Wed Sep 28 13:42:57 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Wed Sep 28 13:42:57 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 10.93"
[Wed Sep 28 13:47:00 2011] fullrun_mos2_xmm0112550701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep 28 13:47:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550701_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 13:47:00 2011] fullrun_mos2_xmm0112550701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep 28 13:47:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550701_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 13:47:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112550701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112550701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 13:47:00 2011] fullrun_mos2_xmm0112550701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 13:47:00 2011] fullrun_mos2_xmm0112550701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 13:47:00 2011] Fit fullrun_mos2_xmm0112550701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 13:47:03 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.542151 pixels away
[Wed Sep 28 13:47:03 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:47:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:47:03 2011] Assessing source extent using major
[Wed Sep 28 13:47:03 2011] Source does appear to be extended
[Wed Sep 28 13:47:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 13:52:54 2011] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 13:52:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 13:52:54 2011] Initial guess for spatial extent in simple fitting = 10.93"
[Wed Sep 28 13:52:54 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Wed Sep 28 13:52:54 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.93"
[Wed Sep 28 13:56:22 2011] fullrun_mos2_xmm0112550701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep 28 13:56:22 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112550701_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 13:56:22 2011] fullrun_mos2_xmm0112550701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep 28 13:56:22 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112550701_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 13:56:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112550701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112550701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 13:56:22 2011] fullrun_mos2_xmm0112550701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 13:56:22 2011] fullrun_mos2_xmm0112550701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 13:56:22 2011] Fit fullrun_mos2_xmm0112550701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 13:56:24 2011] Spatial fit model total counts = 409.812000, observed total counts = 410.000000
[Wed Sep 28 13:56:24 2011] Offset between fit and detection position for source 1 = 0.300816 pixels
[Wed Sep 28 13:56:24 2011] 413.834000 total counts/ 352.013000 bgd. counts: snr = 3.295010
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.300816 pixels
  Position = (410.3, 351.8) = 12 29 31.99 13 44 5.0
  Extent = 3.8 (2.9-5.3)", rotation angle = 0
  Source counts = 61.8 +/- 20.3
  Background counts = 352.0
  Rate = 0.01 +/- 0.004
[Wed Sep 28 13:56:24 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:56:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:56:24 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 13:56:24 2011] Source does appear to be extended
[Wed Sep 28 13:56:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 13:57:04 2011] XMMSAS src. selection expression = ellipse(35647.909380, 30560.661600, 229.350607, 229.350607, 0.000000, X, Y)
[Wed Sep 28 13:57:04 2011] Writing source region out to fullrun_mos2_xmm0112550701_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep 28 13:57:04 2011] Extracting stamp from image fullrun_mos2_xmm0112550701_pi300-10000_cl_sm2.00.img.gz, (397, 339) - (423, 365)
[Wed Sep 28 13:57:04 2011] XMMSAS bgd. selection expression = annulus(35647.909380, 30560.661600, 382.251011, 764.502022, X, Y)
[Wed Sep 28 13:57:04 2011] Writing fullrun_mos2_xmm0112550701_pi300-10000_pass1_cl_src1.gif
[Wed Sep 28 13:57:06 2011] Mean detx,y = (11949.19, -606.62) 
[Wed Sep 28 13:57:07 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 13:57:13 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 13:57:13 2011] Setting source spectrum file to fullrun_mos2_xmm0112550701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 13:57:13 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112550701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep 28 13:57:38 2011] Not generating rmf since there are only 61 counts
[Wed Sep 28 13:57:38 2011] rmf not generated due to insufficient counts
[Wed Sep 28 14:07:01 2011] Updating aperture counts using extracted products
[Wed Sep 28 14:07:01 2011] Error reading totcts from fullrun_mos2_xmm0112550701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 14:07:01 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:07:01 2011] Using photon index=1.80, rate=0.0112, arf fullrun_mos2_xmm0112550701_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 14:07:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:07:01 2011] Updating source flux to 3.4e-13
[Wed Sep 28 14:07:03 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 14:07:13 2011] xmm0112550701/analysis//spectral/fullrun_mos2_xmm0112550701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete