[Wed Aug 22 22:32:20 2012] Detection parameters:
  Position = (313.3, 327.0) = 12 29 42.41 8 0 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.9 +/- 22.9
  Background counts = 58.9
  Rate = 0.01 +/- 0.001

[Wed Aug 22 22:32:20 2012] Off-axis axis estimate = 2.33'
[Thu Aug 23 03:49:03 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 03:49:03 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Thu Aug 23 03:49:03 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.991
[Thu Aug 23 03:49:03 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.59"
[Thu Aug 23 06:06:54 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_src6.ximg exists
[Thu Aug 23 06:06:54 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Aug 23 06:06:54 2012] Fit fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu Aug 23 06:06:55 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Aug 23 06:06:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug 23 06:06:55 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Aug 23 06:06:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug 23 06:06:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 06:07:28 2012] Spatial fit model total counts = 1533.940000, observed total counts = 1392.000000
[Thu Aug 23 06:07:28 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 23 06:07:28 2012] Source 6 is offset by -7.708762 and -1.047464 pixels which is larger than
2 X fitted extent = 1.614161 x 1.614161, not incorporating fit results
[Thu Aug 23 06:07:28 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 06:07:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 06:07:28 2012] Assessing source extent using major
[Thu Aug 23 06:07:28 2012] Source does appear to be extended
[Thu Aug 23 06:07:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 13:10:03 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 13:10:03 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Thu Aug 23 13:10:03 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.991
[Thu Aug 23 13:10:03 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.59"
[Thu Aug 23 14:35:14 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src6.ximg exists
[Thu Aug 23 14:35:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src6.csv
[Thu Aug 23 14:35:14 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Aug 23 14:35:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src6.csv
[Thu Aug 23 14:35:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 14:35:14 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Aug 23 14:35:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Aug 23 14:35:14 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Aug 23 14:35:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Aug 23 14:35:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 14:35:39 2012] Spatial fit model total counts = 1544.500000, observed total counts = 1392.000000
[Thu Aug 23 14:35:39 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 23 14:35:39 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 14:35:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 14:35:39 2012] Assessing source extent using major
[Thu Aug 23 14:35:39 2012] Source does appear to be extended
[Thu Aug 23 14:35:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 15:09:59 2012] XMMSAS src. selection expression = ellipse(27204.921722, 28398.978668, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 23 15:09:59 2012] Writing source region out to fullrun_mos2_xmm0112550601_pi300-10000_pass1_cl_src6_src.reg
[Thu Aug 23 15:09:59 2012] Extracting stamp from image fullrun_mos2_xmm0112550601_pi300-10000_cl_sm2.00.img.gz, (276, 289) - (351, 364)
[Thu Aug 23 15:09:59 2012] XMMSAS bgd. selection expression = annulus(27204.921722, 28398.978668, 1087.500000, 2175.000000, X, Y) && !ellipse(25839.444400, 28309.246400, 776.020822, 776.020822, 0.000000, X, Y) && !ellipse(26130.788000, 27333.148000, 441.300813, 441.300813, 0.000000, X, Y) && !ellipse(26646.600922, 29103.323425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29509.483600, 26938.783800, 458.481613, 458.481613, 0.000000, X, Y) && !ellipse(27759.886566, 27534.724152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24776.589447, 29179.318329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27113.479858, 26054.139099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26044.217255, 29943.603027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28434.344400, 26974.474000, 997.888029, 997.888029, 0.000000, X, Y) && !ellipse(27797.141937, 26603.692993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25261.129639, 26507.811920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24537.464233, 27018.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24381.215759, 26252.021088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28593.780000, 27266.892000, 1223.216035, 1223.216035, 0.000000, X, Y) && !ellipse(28170.901031, 27769.566803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26752.079926, 25437.832458, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 23 15:09:59 2012] Writing fullrun_mos2_xmm0112550601_pi300-10000_pass1_cl_src6.gif
[Thu Aug 23 15:14:07 2012] Mean detx,y = (-1060.33, 4.29) 
[Thu Aug 23 15:14:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 15:14:17 2012] grppha failed
[Thu Aug 23 15:14:17 2012] Setting source spectrum file to fullrun_mos2_xmm0112550601_pi300-10000_pass1_cl_src6_src.pi.gz
[Thu Aug 23 15:14:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112550601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Aug 23 15:18:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 23 15:18:26 2012] rmf not generated due to insufficient counts
[Thu Aug 23 15:18:51 2012] Updating aperture counts using extracted products
[Thu Aug 23 15:18:51 2012] Error reading totcts from fullrun_mos2_xmm0112550601_pi300-10000_pass1_cl_src6_src.pi.gz
[Thu Aug 23 15:18:51 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 15:18:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 23 15:18:55 2012] xmm0112550601/analysis//spectral/fullrun_mos2_xmm0112550601_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete