[Wed Aug 22 22:32:20 2012] Detection parameters:
  Position = (290.6, 310.1) = 12 29 49.03 7 58 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.9 +/- 21.1
  Background counts = 58.8
  Rate = 0.01 +/- 0.001

[Wed Aug 22 22:32:20 2012] Off-axis axis estimate = 1.02'
[Thu Aug 23 03:49:03 2012] Using EEF radius (= 6.94 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 03:49:03 2012] Initial guess for spatial extent in simple fitting = 6.94"
[Thu Aug 23 03:49:03 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.912
[Thu Aug 23 03:49:03 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.94"
[Thu Aug 23 06:06:54 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_src11.ximg exists
[Thu Aug 23 06:06:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_src11.csv
[Thu Aug 23 06:06:54 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Aug 23 06:06:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_src11.csv
[Thu Aug 23 06:06:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 06:06:55 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Aug 23 06:06:55 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Aug 23 06:06:55 2012] Fit fullrun_mos2_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Aug 23 06:07:28 2012] Source 16 is offset by -4.035829 and -7.300053 pixels which is larger than
2 X fitted extent = 3.492690 x 3.492690, not incorporating fit results
[Thu Aug 23 06:07:28 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 06:07:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 06:07:28 2012] Assessing source extent using major
[Thu Aug 23 06:07:28 2012] Source does appear to be extended
[Thu Aug 23 06:07:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 06:07:28 2012] Source is confused with source 35
[Thu Aug 23 13:10:03 2012] Using EEF radius (= 6.94 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 13:10:03 2012] Initial guess for spatial extent in simple fitting = 6.94"
[Thu Aug 23 13:10:03 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.912
[Thu Aug 23 13:10:03 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.94"
[Thu Aug 23 14:35:14 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src9.ximg exists
[Thu Aug 23 14:35:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src9.csv
[Thu Aug 23 14:35:14 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Aug 23 14:35:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src9.csv
[Thu Aug 23 14:35:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 14:35:14 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Aug 23 14:35:14 2012] fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Aug 23 14:35:14 2012] Fit fullrun_mos2_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Aug 23 14:35:39 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.744592 pixels away
[Thu Aug 23 14:35:39 2012] Source 16 is offset by -4.164128 and -7.300053 pixels which is larger than
2 X fitted extent = 3.670101 x 3.670101, not incorporating fit results
[Thu Aug 23 14:35:39 2012] Spatial fit model total counts = 1047.030000, observed total counts = 1045.000000
[Thu Aug 23 14:35:39 2012] Offset between fit and detection position for source 16 = 0.565706 pixels
[Thu Aug 23 14:35:39 2012] Warning, changing simple spatial fit ID from 9 to 22
[Thu Aug 23 14:35:39 2012] 1081.694500 total counts/ 1056.060000 bgd. counts: snr = 0.788825
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.565706 pixels
  Position = (290.4, 309.6) = 12 29 49.10 7 58 51.4
  Extent = 2.6 (1.7-5.1)", rotation angle = 0
  Source counts = 25.6 +/- 32.9
  Background counts = 1056.1
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability