[Wed Aug 22 22:31:59 2012] Detection parameters:
  Position = (291.6, 339.4) = 12 29 48.76 8 0 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1136.5 +/- 271.8
  Background counts = 51.9
  Rate = 0.07 +/- 0.02

[Wed Aug 22 22:32:00 2012] Off-axis axis estimate = 3.01'
[Thu Aug 23 01:38:33 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 01:38:33 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Thu Aug 23 01:38:33 2012] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.833
[Thu Aug 23 01:38:33 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.93"
[Thu Aug 23 03:49:01 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src2.ximg exists
[Thu Aug 23 03:49:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src2.csv
[Thu Aug 23 03:49:01 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Aug 23 03:49:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src2.csv
[Thu Aug 23 03:49:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 03:49:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Aug 23 03:49:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Aug 23 03:49:02 2012] Fit fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Aug 23 06:07:20 2012] Warning, spatial fit 2 centroid is now closest to src. 12
[Thu Aug 23 06:07:20 2012] Source 4 is offset by 1.575923 and 5.797353 pixels which is larger than
2 X fitted extent = 1.086731 x 1.086731, not incorporating fit results
[Thu Aug 23 06:07:20 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 06:07:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 06:07:20 2012] Assessing source extent using major
[Thu Aug 23 06:07:20 2012] Source does appear to be extended
[Thu Aug 23 06:07:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 06:07:20 2012] Source is confused with source 10
[Thu Aug 23 06:07:20 2012] Source is confused with source 12
[Thu Aug 23 10:46:57 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 10:46:57 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Thu Aug 23 10:46:57 2012] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.833
[Thu Aug 23 10:46:57 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.93"
[Thu Aug 23 13:10:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src2.ximg exists
[Thu Aug 23 13:10:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Aug 23 13:10:02 2012] Fit fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu Aug 23 13:10:03 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Aug 23 13:10:03 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Aug 23 13:10:03 2012] Fit fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Aug 23 14:35:33 2012] Source 4 is offset by -4.652974 and 6.713169 pixels which is larger than
2 X fitted extent = 4.594225 x 4.594225, not incorporating fit results
[Thu Aug 23 14:35:33 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 14:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 14:35:33 2012] Assessing source extent using major
[Thu Aug 23 14:35:33 2012] Source does appear to be extended
[Thu Aug 23 14:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 14:57:28 2012] Counts = 1136.509888, rescaling region sizes by 2.000000
[Thu Aug 23 14:57:28 2012] XMMSAS src. selection expression = ellipse(25319.317261, 29480.767700, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Aug 23 14:57:28 2012] Writing source region out to fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src4_src.reg
[Thu Aug 23 14:57:28 2012] Extracting stamp from image fullrun_mos1_xmm0112550601_pi300-10000_cl_sm2.00.img.gz, (217, 264) - (367, 414)
[Thu Aug 23 14:57:28 2012] XMMSAS bgd. selection expression = annulus(25319.317261, 29480.767700, 4350.000000, 8700.000000, X, Y) && !ellipse(25841.374060, 28301.471200, 878.848025, 878.848025, 0.000000, X, Y) && !ellipse(32716.277000, 21042.896800, 346.387210, 346.387210, 0.000000, X, Y) && !ellipse(27971.460541, 20482.856155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27196.472000, 28467.466000, 891.208026, 891.208026, 0.000000, X, Y) && !ellipse(31469.407800, 36061.627600, 446.853613, 446.853613, 0.000000, X, Y) && !ellipse(26549.790000, 28188.798000, 2485.120072, 2485.120072, 0.000000, X, Y) && !ellipse(33194.874908, 20457.274948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27605.218000, 27732.176000, 1242.560036, 1242.560036, 0.000000, X, Y) && !ellipse(25542.289276, 29710.531281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25228.394000, 30386.960000, 1282.792037, 1282.792037, 0.000000, X, Y) && !ellipse(29500.866600, 26875.044200, 477.258414, 477.258414, 0.000000, X, Y) && !ellipse(27639.275200, 25524.674000, 2251.536065, 2251.536065, 0.000000, X, Y) && !ellipse(23786.130768, 28051.278687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.382000, 29078.630000, 1282.976037, 1282.976037, 0.000000, X, Y) && !ellipse(27340.840637, 26222.388306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26108.012000, 25606.020000, 892.928026, 892.928026, 0.000000, X, Y) && !ellipse(28049.216000, 27288.764000, 1206.616035, 1206.616035, 0.000000, X, Y) && !ellipse(27389.674591, 29435.334839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26441.768066, 26060.232391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27546.188568, 25218.734131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24228.198456, 26347.864990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26470.617615, 30091.150970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28208.583862, 28161.605774, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 23 14:57:28 2012] Writing fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src4.gif
[Thu Aug 23 15:00:20 2012] Mean detx,y = (1424.02, -294.23) 
[Thu Aug 23 15:00:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 15:02:45 2012] grppha failed
[Thu Aug 23 15:02:45 2012] Setting source spectrum file to fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src4_src.pi.gz
[Thu Aug 23 15:02:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Aug 23 15:09:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 23 15:09:56 2012] rmf not generated due to insufficient counts
[Thu Aug 23 15:18:51 2012] Updating aperture counts using extracted products
[Thu Aug 23 15:18:51 2012] Error reading totcts from fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src4_src.pi.gz
[Thu Aug 23 15:18:51 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 15:18:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 23 15:18:54 2012] xmm0112550601/analysis//spectral/fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete