[Wed Aug 22 22:32:00 2012] Detection parameters:
  Position = (327.3, 308.9) = 12 29 38.30 7 58 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.3 +/- 15.4
  Background counts = 49.1
  Rate = 0.005 +/- 0.0009

[Wed Aug 22 22:32:00 2012] Off-axis axis estimate = 2.23'
[Thu Aug 23 01:38:33 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 01:38:33 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Thu Aug 23 01:38:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.002
[Thu Aug 23 01:38:33 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.54"
[Thu Aug 23 03:49:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src30.ximg exists
[Thu Aug 23 03:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src30.csv
[Thu Aug 23 03:49:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Aug 23 03:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src30.csv
[Thu Aug 23 03:49:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 03:49:03 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Aug 23 03:49:03 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Aug 23 03:49:03 2012] Fit fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Aug 23 06:07:20 2012] Spatial fit model total counts = 723.043000, observed total counts = 722.000000
[Thu Aug 23 06:07:20 2012] Offset between fit and detection position for source 35 = 6.838685 pixels
[Thu Aug 23 06:07:20 2012] 710.148000 total counts/ 556.530000 bgd. counts: snr = 6.511751
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 6.838685 pixels
  Position = (323.0, 314.2) = 12 29 39.57 7 59 11.8
  Extent = 15.1 (15.0-30.2)", rotation angle = 0
  Source counts = 153.6 +/- 26.6
  Background counts = 556.5
  Rate = 0.01 +/- 0.002
[Thu Aug 23 06:07:20 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 06:07:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 06:07:20 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 06:07:20 2012] Source does appear to be extended
[Thu Aug 23 06:07:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 06:07:20 2012] Source is confused with source 16
[Thu Aug 23 10:46:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 10:46:57 2012] Initial guess for spatial extent in simple fitting = 15.08"
[Thu Aug 23 10:46:57 2012] source mask rpix=3.5, npix_max = 62, mask sum = 64, frac = 1.017
[Thu Aug 23 10:46:57 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 15.08"
[Thu Aug 23 13:10:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src23.ximg exists
[Thu Aug 23 13:10:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Aug 23 13:10:02 2012] Fit fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src23 appears to have run properly
[Thu Aug 23 13:10:03 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Aug 23 13:10:03 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Aug 23 13:10:03 2012] Fit fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Aug 23 14:35:33 2012] Source 35 is offset by -0.281517 and -4.534805 pixels which is larger than
2 X fitted extent = 1.280474 x 1.280474, not incorporating fit results
[Thu Aug 23 14:35:33 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 12.364904 pixels away
[Thu Aug 23 14:35:33 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 14:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 14:35:33 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 14:35:33 2012] Source does appear to be extended
[Thu Aug 23 14:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 14:57:28 2012] XMMSAS src. selection expression = ellipse(28049.216000, 27288.764000, 904.962026, 904.962026, 0.000000, X, Y)
[Thu Aug 23 14:57:28 2012] Writing source region out to fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src35_src.reg
[Thu Aug 23 14:57:28 2012] Extracting stamp from image fullrun_mos1_xmm0112550601_pi300-10000_cl_sm2.00.img.gz, (271, 262) - (375, 366)
[Thu Aug 23 14:57:28 2012] XMMSAS bgd. selection expression = annulus(28049.216000, 27288.764000, 1508.270043, 3016.540087, X, Y) && !ellipse(25841.374060, 28301.471200, 878.848025, 878.848025, 0.000000, X, Y) && !ellipse(25319.317261, 29480.767700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27196.472000, 28467.466000, 891.208026, 891.208026, 0.000000, X, Y) && !ellipse(26549.790000, 28188.798000, 2485.120072, 2485.120072, 0.000000, X, Y) && !ellipse(27605.218000, 27732.176000, 1242.560036, 1242.560036, 0.000000, X, Y) && !ellipse(25542.289276, 29710.531281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25228.394000, 30386.960000, 1282.792037, 1282.792037, 0.000000, X, Y) && !ellipse(29500.866600, 26875.044200, 477.258414, 477.258414, 0.000000, X, Y) && !ellipse(27639.275200, 25524.674000, 2251.536065, 2251.536065, 0.000000, X, Y) && !ellipse(26921.382000, 29078.630000, 1282.976037, 1282.976037, 0.000000, X, Y) && !ellipse(27340.840637, 26222.388306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26108.012000, 25606.020000, 892.928026, 892.928026, 0.000000, X, Y) && !ellipse(27389.674591, 29435.334839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26441.768066, 26060.232391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27546.188568, 25218.734131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24228.198456, 26347.864990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26470.617615, 30091.150970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28208.583862, 28161.605774, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 23 14:57:28 2012] Writing fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src35.gif
[Thu Aug 23 15:08:01 2012] Mean detx,y = (-1109.58, 1037.80) 
[Thu Aug 23 15:08:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 15:08:14 2012] grppha failed
[Thu Aug 23 15:08:14 2012] Setting source spectrum file to fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src35_src.pi.gz
[Thu Aug 23 15:08:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Aug 23 15:18:51 2012] Updating aperture counts using extracted products
[Thu Aug 23 15:18:51 2012] Error reading totcts from fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src35_src.pi.gz
[Thu Aug 23 15:18:51 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 15:18:53 2012] Flag b found in src. 35 procflags, skipping spectral fitting
[Thu Aug 23 15:18:53 2012] Flag c found in src. 35 procflags, skipping spectral fitting
[Thu Aug 23 15:18:53 2012] Source 35 has no response, skipping
[Thu Aug 23 15:18:54 2012] xmm0112550601/analysis//spectral/fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete