[Wed Aug 22 22:32:00 2012] Detection parameters:
  Position = (338.8, 457.2) = 12 29 34.92 8 9 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.9 +/- 13.8
  Background counts = 13.6
  Rate = 0.01 +/- 0.002

[Wed Aug 22 22:32:00 2012] Off-axis axis estimate = 11.88'
[Thu Aug 23 01:38:33 2012] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 01:38:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 23 01:38:33 2012] Initial guess for spatial extent in simple fitting = 12.37"
[Thu Aug 23 01:38:33 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.096
[Thu Aug 23 01:38:33 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 12.37"
[Thu Aug 23 03:49:01 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src8.ximg exists
[Thu Aug 23 03:49:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src8.csv
[Thu Aug 23 03:49:01 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Aug 23 03:49:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src8.csv
[Thu Aug 23 03:49:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 03:49:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Aug 23 03:49:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Aug 23 03:49:02 2012] Fit fullrun_mos1_xmm0112550601_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Aug 23 06:07:20 2012] Spatial fit model total counts = 156.997000, observed total counts = 157.000000
[Thu Aug 23 06:07:20 2012] Offset between fit and detection position for source 21 = 0.543751 pixels
[Thu Aug 23 06:07:20 2012] 160.785100 total counts/ 76.073500 bgd. counts: snr = 9.712392
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.543751 pixels
  Position = (338.3, 457.3) = 12 29 35.08 8 9 34.4
  Extent = 7.1 (5.5-8.9)", rotation angle = 0
  Source counts = 84.7 +/- 12.7
  Background counts = 76.1
  Rate = 0.005 +/- 0.0008
[Thu Aug 23 06:07:20 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 06:07:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 06:07:20 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 06:07:20 2012] Source does appear to be extended
[Thu Aug 23 06:07:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 10:46:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 10:46:57 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Thu Aug 23 10:46:57 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.874
[Thu Aug 23 10:46:57 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.13"
[Thu Aug 23 13:10:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src8.ximg exists
[Thu Aug 23 13:10:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src8.csv
[Thu Aug 23 13:10:02 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Aug 23 13:10:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src8.csv
[Thu Aug 23 13:10:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 13:10:03 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Aug 23 13:10:03 2012] fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Aug 23 13:10:03 2012] Fit fullrun_mos1_xmm0112550601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Aug 23 14:35:33 2012] Spatial fit model total counts = 150.876000, observed total counts = 151.000000
[Thu Aug 23 14:35:33 2012] Offset between fit and detection position for source 21 = 0.034160 pixels
[Thu Aug 23 14:35:33 2012] 155.291500 total counts/ 71.439400 bgd. counts: snr = 9.920762
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.034160 pixels
  Position = (338.3, 457.3) = 12 29 35.08 8 9 34.2
  Extent = 7.1 (5.4-8.8)", rotation angle = 0
  Source counts = 83.9 +/- 12.5
  Background counts = 71.4
  Rate = 0.005 +/- 0.0008
[Thu Aug 23 14:35:33 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 14:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 14:35:33 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 14:35:33 2012] Source does appear to be extended
[Thu Aug 23 14:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 14:57:28 2012] XMMSAS src. selection expression = ellipse(29381.300600, 39738.022600, 424.655412, 424.655412, 0.000000, X, Y)
[Thu Aug 23 14:57:28 2012] Writing source region out to fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src21_src.reg
[Thu Aug 23 14:57:28 2012] Extracting stamp from image fullrun_mos1_xmm0112550601_pi300-10000_cl_sm2.00.img.gz, (314, 433) - (363, 482)
[Thu Aug 23 14:57:28 2012] XMMSAS bgd. selection expression = annulus(29381.300600, 39738.022600, 707.759020, 1415.518041, X, Y)
[Thu Aug 23 14:57:28 2012] Writing fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src21.gif
[Thu Aug 23 15:04:25 2012] Mean detx,y = (9343.13, 8006.97) 
[Thu Aug 23 15:04:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 15:04:35 2012] grppha failed
[Thu Aug 23 15:04:35 2012] Setting source spectrum file to fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src21_src.pi.gz
[Thu Aug 23 15:04:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Aug 23 15:09:57 2012] Not generating rmf since there are only 83 counts
[Thu Aug 23 15:09:57 2012] rmf not generated due to insufficient counts
[Thu Aug 23 15:18:51 2012] Updating aperture counts using extracted products
[Thu Aug 23 15:18:51 2012] Error reading totcts from fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src21_src.pi.gz
[Thu Aug 23 15:18:51 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 15:18:53 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Aug 23 15:18:54 2012] xmm0112550601/analysis//spectral/fullrun_mos1_xmm0112550601_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete