[Tue Aug 28 15:45:27 2012] Detection parameters:
  Position = (475.4, 237.2) = 12 11 22.46 13 9 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 505.1 +/- 26.5
  Background counts = 5.4
  Rate = 0.02 +/- 0.001

[Tue Aug 28 15:45:27 2012] Off-axis axis estimate = 13.58'
[Tue Aug 28 16:19:39 2012] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 16:19:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 28 16:19:39 2012] Initial guess for spatial extent in simple fitting = 13.22"
[Tue Aug 28 16:19:39 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Tue Aug 28 16:19:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.22"
[Tue Aug 28 16:35:10 2012] fullrun_mos1_xmm0112550501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 28 16:35:10 2012] fullrun_mos1_xmm0112550501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 28 16:35:10 2012] Fit fullrun_mos1_xmm0112550501_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Aug 28 16:35:10 2012] fullrun_mos1_xmm0112550501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 28 16:35:10 2012] fullrun_mos1_xmm0112550501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 28 16:35:10 2012] Fit fullrun_mos1_xmm0112550501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 28 16:56:07 2012] Spatial fit model total counts = 587.099000, observed total counts = 583.000000
[Tue Aug 28 16:56:07 2012] Offset between fit and detection position for source 1 = 0.353016 pixels
[Tue Aug 28 16:56:07 2012] 587.536000 total counts/ 232.506000 bgd. counts: snr = 23.283484
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.353016 pixels
  Position = (475.1, 237.4) = 12 11 22.54 13 9 37.1
  Extent = 6.4 (5.8-7.0)", rotation angle = 0
  Source counts = 355.0 +/- 24.2
  Background counts = 232.5
  Rate = 0.02 +/- 0.001
[Tue Aug 28 16:56:07 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 16:56:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 16:56:07 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 16:56:07 2012] Source does appear to be extended
[Tue Aug 28 16:56:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 17:28:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 17:28:20 2012] Initial guess for spatial extent in simple fitting = 6.36"
[Tue Aug 28 17:28:20 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.038
[Tue Aug 28 17:28:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.36"
[Tue Aug 28 17:46:36 2012] fullrun_mos1_xmm0112550501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 28 17:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550501_pi300-10000_cl_pass1_src1.csv
[Tue Aug 28 17:46:36 2012] fullrun_mos1_xmm0112550501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 28 17:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550501_pi300-10000_cl_pass1_src1.csv
[Tue Aug 28 17:46:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112550501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112550501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 17:46:36 2012] fullrun_mos1_xmm0112550501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 28 17:46:36 2012] fullrun_mos1_xmm0112550501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 28 17:46:36 2012] Fit fullrun_mos1_xmm0112550501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 28 18:06:58 2012] Spatial fit model total counts = 491.942000, observed total counts = 492.000000
[Tue Aug 28 18:06:58 2012] Offset between fit and detection position for source 1 = 0.030970 pixels
[Tue Aug 28 18:06:58 2012] 492.168000 total counts/ 162.645000 bgd. counts: snr = 25.838386
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.030970 pixels
  Position = (475.1, 237.5) = 12 11 22.54 13 9 37.2
  Extent = 5.8 (5.2-6.5)", rotation angle = 0
  Source counts = 329.5 +/- 22.2
  Background counts = 162.6
  Rate = 0.01 +/- 0.001
[Tue Aug 28 18:06:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 18:06:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 18:06:58 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 18:06:58 2012] Source does appear to be extended
[Tue Aug 28 18:06:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 18:19:19 2012] XMMSAS src. selection expression = ellipse(41287.013900, 20609.889000, 349.297210, 349.297210, 0.000000, X, Y)
[Tue Aug 28 18:19:19 2012] Writing source region out to fullrun_mos1_xmm0112550501_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 28 18:19:19 2012] Extracting stamp from image fullrun_mos1_xmm0112550501_pi300-10000_cl_sm2.00.img.gz, (455, 217) - (495, 258)
[Tue Aug 28 18:19:19 2012] XMMSAS bgd. selection expression = annulus(41287.013900, 20609.889000, 582.162017, 1164.324034, X, Y)
[Tue Aug 28 18:19:19 2012] Writing fullrun_mos1_xmm0112550501_pi300-10000_pass1_cl_src1.gif
[Tue Aug 28 18:19:20 2012] Mean detx,y = (10755.85, -12166.03) 
[Tue Aug 28 18:19:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 18:19:33 2012] grppha failed
[Tue Aug 28 18:19:33 2012] Setting source spectrum file to fullrun_mos1_xmm0112550501_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 18:19:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112550501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 28 18:28:05 2012] Updating aperture counts using extracted products
[Tue Aug 28 18:28:05 2012] Error reading totcts from fullrun_mos1_xmm0112550501_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 18:28:05 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 18:28:06 2012] Source 1 has no response, skipping
[Tue Aug 28 18:28:07 2012] xmm0112550501/analysis//spectral/fullrun_mos1_xmm0112550501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete