[Thu Aug  9 17:37:22 2012] Detection parameters:
  Position = (301.0, 321.1) = 12 36 20.77 25 59 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 445.4 +/- 25.8
  Background counts = 7.3
  Rate = 0.03 +/- 0.002

[Thu Aug  9 17:37:22 2012] Off-axis axis estimate = 1.65'
[Thu Aug  9 18:38:31 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 18:38:31 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Aug  9 18:38:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Thu Aug  9 18:38:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Aug  9 19:36:29 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  9 19:36:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 19:36:29 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  9 19:36:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 19:36:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 19:36:29 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  9 19:36:29 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  9 19:36:29 2012] Fit fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug  9 20:19:34 2012] Spatial fit model total counts = 552.040000, observed total counts = 551.000000
[Thu Aug  9 20:19:34 2012] Offset between fit and detection position for source 2 = 0.132242 pixels
[Thu Aug  9 20:19:34 2012] 556.965000 total counts/ 266.839000 bgd. counts: snr = 17.760779
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.132242 pixels
  Position = (300.9, 321.2) = 12 36 20.80 25 59 14.8
  Extent = 5.7 (5.1-6.4)", rotation angle = 0
  Source counts = 290.1 +/- 23.6
  Background counts = 266.8
  Rate = 0.02 +/- 0.002
[Thu Aug  9 20:19:35 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:19:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:19:35 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 20:19:35 2012] Source does appear to be extended
[Thu Aug  9 20:19:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 21:14:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 21:14:08 2012] Initial guess for spatial extent in simple fitting = 5.68"
[Thu Aug  9 21:14:08 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.228
[Thu Aug  9 21:14:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.68"
[Thu Aug  9 21:53:55 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  9 21:53:55 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  9 21:53:55 2012] Fit fullrun_mos1_xmm0112550301_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Aug  9 21:53:55 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  9 21:53:55 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  9 21:53:55 2012] Fit fullrun_mos1_xmm0112550301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug  9 22:28:18 2012] Spatial fit model total counts = 550.922000, observed total counts = 551.000000
[Thu Aug  9 22:28:18 2012] Offset between fit and detection position for source 2 = 0.004961 pixels
[Thu Aug  9 22:28:18 2012] 555.989000 total counts/ 268.227000 bgd. counts: snr = 17.570422
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.004961 pixels
  Position = (300.9, 321.2) = 12 36 20.80 25 59 14.8
  Extent = 6.3" x 5.0", rotation angle = 135
  Source counts = 287.8 +/- 23.6
  Background counts = 268.2
  Rate = 0.02 +/- 0.002
[Thu Aug  9 22:28:18 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 22:28:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 22:28:18 2012] Assessing source extent using major
[Thu Aug  9 22:28:18 2012] Source does appear to be extended
[Thu Aug  9 22:28:18 2012] Computing asymmetry using major and minor axis, asym = 1.28
[Thu Aug  9 23:23:21 2012] XMMSAS src. selection expression = ellipse(26131.618360, 27897.058200, 380.055611, 298.009209, 134.654494, X, Y)
[Thu Aug  9 23:23:21 2012] Writing source region out to fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src2_src.reg
[Thu Aug  9 23:23:21 2012] Extracting stamp from image fullrun_mos1_xmm0112550301_pi300-10000_cl_sm2.00.img.gz, (279, 299) - (323, 343)
[Thu Aug  9 23:23:21 2012] XMMSAS bgd. selection expression = annulus(26131.618360, 27897.058200, 633.426018, 1266.852036, X, Y) && !ellipse(27026.030740, 27513.406000, 389.208011, 389.208011, 0.000000, X, Y) && !ellipse(26603.559600, 29344.311600, 331.884010, 331.884010, 0.000000, X, Y) && !ellipse(27133.312927, 28554.943054, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  9 23:23:21 2012] Writing fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src2.gif
[Thu Aug  9 23:23:23 2012] Mean detx,y = (331.16, -399.70) 
[Thu Aug  9 23:23:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 23:23:32 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 23:23:32 2012] Setting source spectrum file to fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug  9 23:23:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug  9 23:53:41 2012] Updating aperture counts using extracted products
[Thu Aug  9 23:53:41 2012] Error reading totcts from fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug  9 23:53:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 23:53:42 2012] Using photon index=1.80, rate=0.0202, arf fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src2.arf
[Thu Aug  9 23:53:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 23:53:42 2012] Updating source flux to 2.2e-13
[Thu Aug  9 23:54:07 2012] Reading fit data from xmm0112550301/analysis//spectral/fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src2_pl.csv
[Thu Aug  9 23:54:07 2012] Spectral fit parameter nH value = 7.71424e+20
[Thu Aug  9 23:54:07 2012] Spectral fit parameter PhoIndex value = 1.73295
[Thu Aug  9 23:54:07 2012] Failed to get F(0.3-8.0) from xmm0112550301/analysis//spectral/fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Aug  9 23:54:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 23:54:07 2012] Using Nh = 7.7e+20, photon index=1.73, rate=0.0202, arf fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src2.arf
[Thu Aug  9 23:54:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 23:54:07 2012] Updating source flux to 2.5e-13