[Thu Aug  9 17:37:22 2012] Detection parameters:
  Position = (268.3, 326.5) = 12 36 31.32 25 59 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.4 +/- 10.9
  Background counts = 5.4
  Rate = 0.007 +/- 0.001

[Thu Aug  9 17:37:22 2012] Off-axis axis estimate = 2.99'
[Thu Aug  9 18:38:31 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 18:38:31 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Thu Aug  9 18:38:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.696
[Thu Aug  9 18:38:31 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.92"
[Thu Aug  9 19:36:29 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src10.ximg exists
[Thu Aug  9 19:36:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src10.csv
[Thu Aug  9 19:36:29 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Aug  9 19:36:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src10.csv
[Thu Aug  9 19:36:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 19:36:29 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Aug  9 19:36:29 2012] fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Aug  9 19:36:29 2012] Fit fullrun_mos1_xmm0112550301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Aug  9 20:19:34 2012] Spatial fit model total counts = 106.877000, observed total counts = 109.000000
[Thu Aug  9 20:19:34 2012] Offset between fit and detection position for source 16 = 1.012769 pixels
[Thu Aug  9 20:19:34 2012] 108.470900 total counts/ 77.121100 bgd. counts: snr = 3.569835
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.012769 pixels
  Position = (267.3, 326.4) = 12 36 31.64 25 59 37.1
  Extent = 5.5 (2.0-8.9)", rotation angle = 0
  Source counts = 31.3 +/- 10.4
  Background counts = 77.1
  Rate = 0.002 +/- 0.0007
[Thu Aug  9 20:19:35 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:19:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:19:35 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 20:19:35 2012] Source does appear to be extended
[Thu Aug  9 20:19:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 21:14:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 21:14:08 2012] Initial guess for spatial extent in simple fitting = 5.46"
[Thu Aug  9 21:14:08 2012] source mask rpix=1.3, npix_max = 12, mask sum = 3, frac = 0.244
[Thu Aug  9 21:14:08 2012] Skipping simple spatial due to low active detector fraction
[Thu Aug  9 22:28:18 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 22:28:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 22:28:18 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 22:28:18 2012] Source does appear to be extended
[Thu Aug  9 22:28:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 23:23:21 2012] XMMSAS src. selection expression = ellipse(23208.841400, 28344.024800, 327.547911, 327.547911, 0.000000, X, Y)
[Thu Aug  9 23:23:21 2012] Writing source region out to fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src16_src.reg
[Thu Aug  9 23:23:21 2012] Extracting stamp from image fullrun_mos1_xmm0112550301_pi300-10000_cl_sm2.00.img.gz, (249, 308) - (286, 345)
[Thu Aug  9 23:23:21 2012] XMMSAS bgd. selection expression = annulus(23208.841400, 28344.024800, 545.913185, 1091.826371, X, Y)
[Thu Aug  9 23:23:21 2012] Writing fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src16.gif
[Thu Aug  9 23:25:20 2012] Mean detx,y = (1876.28, -2885.48) 
[Thu Aug  9 23:25:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 23:25:28 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 23:25:28 2012] Setting source spectrum file to fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Aug  9 23:25:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Aug  9 23:43:16 2012] Not generating rmf since there are only 31 counts
[Thu Aug  9 23:43:16 2012] rmf not generated due to insufficient counts
[Thu Aug  9 23:53:42 2012] Updating aperture counts using extracted products
[Thu Aug  9 23:53:42 2012] Error reading totcts from fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Aug  9 23:53:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 23:53:42 2012] Using photon index=1.80, rate=0.0022, arf fullrun_mos1_xmm0112550301_pi300-10000_pass1_cl_src16.arf
[Thu Aug  9 23:53:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 23:53:42 2012] Updating source flux to 3.9e-14
[Thu Aug  9 23:53:44 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting