[Fri Oct  7 07:25:26 2011] Detection parameters:
  Position = (448.9, 357.9) = 2 42 40.58 37 23 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.7 +/- 13.4
  Background counts = 23.1
  Rate = 0.01 +/- 0.001

[Fri Oct  7 07:25:26 2011] Off-axis axis estimate = 11.73'
[Fri Oct  7 07:40:31 2011] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 07:40:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 07:40:31 2011] Initial guess for spatial extent in simple fitting = 12.29"
[Fri Oct  7 07:40:31 2011] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.814
[Fri Oct  7 07:40:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 12.29"
[Fri Oct  7 07:50:56 2011] fullrun_mos1_xmm0112550201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Oct  7 07:50:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550201_pi300-10000_cl_pass0_src1.csv
[Fri Oct  7 07:50:56 2011] fullrun_mos1_xmm0112550201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Oct  7 07:50:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550201_pi300-10000_cl_pass0_src1.csv
[Fri Oct  7 07:50:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112550201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112550201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 07:50:56 2011] fullrun_mos1_xmm0112550201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 07:50:56 2011] fullrun_mos1_xmm0112550201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 07:50:56 2011] Fit fullrun_mos1_xmm0112550201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 07:55:36 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.828203 pixels away
[Fri Oct  7 07:55:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 07:55:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 07:55:36 2011] Assessing source extent using major
[Fri Oct  7 07:55:36 2011] Source does appear to be extended
[Fri Oct  7 07:55:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 08:09:32 2011] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 08:09:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 08:09:32 2011] Initial guess for spatial extent in simple fitting = 12.29"
[Fri Oct  7 08:09:32 2011] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.814
[Fri Oct  7 08:09:32 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 12.29"
[Fri Oct  7 08:17:57 2011] fullrun_mos1_xmm0112550201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Oct  7 08:17:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550201_pi300-10000_cl_pass1_src1.csv
[Fri Oct  7 08:17:57 2011] fullrun_mos1_xmm0112550201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Oct  7 08:17:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112550201_pi300-10000_cl_pass1_src1.csv
[Fri Oct  7 08:17:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112550201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112550201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 08:17:57 2011] fullrun_mos1_xmm0112550201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 08:17:57 2011] fullrun_mos1_xmm0112550201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 08:17:57 2011] Fit fullrun_mos1_xmm0112550201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 08:22:47 2011] Spatial fit model total counts = 201.855000, observed total counts = 202.000000
[Fri Oct  7 08:22:47 2011] Offset between fit and detection position for source 3 = 0.293313 pixels
[Fri Oct  7 08:22:47 2011] 201.107000 total counts/ 159.320000 bgd. counts: snr = 3.310595
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.293313 pixels
  Position = (448.6, 357.9) = 2 42 40.69 37 23 37.9
  Extent = 4.6 (3.6-6.1)", rotation angle = 0
  Source counts = 41.8 +/- 14.2
  Background counts = 159.3
  Rate = 0.003 +/- 0.001
[Fri Oct  7 08:22:47 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 08:22:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 08:22:47 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 08:22:47 2011] Source does appear to be extended
[Fri Oct  7 08:22:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 08:34:32 2011] XMMSAS src. selection expression = ellipse(38978.907360, 31091.416000, 276.618608, 276.618608, 0.000000, X, Y)
[Fri Oct  7 08:34:32 2011] Writing source region out to fullrun_mos1_xmm0112550201_pi300-10000_pass1_cl_src3_src.reg
[Fri Oct  7 08:34:32 2011] Extracting stamp from image fullrun_mos1_xmm0112550201_pi300-10000_cl_sm2.00.img.gz, (433, 342) - (464, 374)
[Fri Oct  7 08:34:32 2011] XMMSAS bgd. selection expression = annulus(38978.907360, 31091.416000, 461.031013, 922.062027, X, Y)
[Fri Oct  7 08:34:32 2011] Writing fullrun_mos1_xmm0112550201_pi300-10000_pass1_cl_src3.gif
[Fri Oct  7 08:34:34 2011] Mean detx,y = (6761.69, 10072.56) 
[Fri Oct  7 08:34:35 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct  7 08:34:43 2011] Binned source spectrum to 10 counts/bin
[Fri Oct  7 08:34:43 2011] Setting source spectrum file to fullrun_mos1_xmm0112550201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Oct  7 08:34:43 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0112550201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Oct  7 08:36:49 2011] Not generating rmf since there are only 41 counts
[Fri Oct  7 08:36:49 2011] rmf not generated due to insufficient counts
[Fri Oct  7 08:38:46 2011] Updating aperture counts using extracted products
[Fri Oct  7 08:38:46 2011] Error reading totcts from fullrun_mos1_xmm0112550201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Oct  7 08:38:46 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 08:38:46 2011] Using photon index=1.80, rate=0.00325, arf fullrun_mos1_xmm0112550201_pi300-10000_pass1_cl_src3.arf
[Fri Oct  7 08:38:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 08:38:46 2011] Updating source flux to 6.5e-14
[Fri Oct  7 08:38:47 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct  7 08:38:48 2011] xmm0112550201/analysis//spectral/fullrun_mos1_xmm0112550201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete