[Thu May 31 22:31:40 2012] Detection parameters:
  Position = (309.5, 317.8) = 16 35 53.06 -28 12 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47806.3 +/- 256.4
  Background counts = 15.5
  Rate = 2 +/- 0.01

[Thu May 31 22:31:41 2012] Off-axis axis estimate = 1.62'
[Thu May 31 23:10:01 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu May 31 23:10:01 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Thu May 31 23:10:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.068
[Thu May 31 23:10:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Fri Jun  1 00:33:30 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  1 00:33:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 00:33:30 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  1 00:33:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 00:33:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 00:33:30 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  1 00:33:30 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  1 00:33:30 2012] Fit fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  1 00:33:39 2012] Spatial fit model total counts = 45960.400000, observed total counts = 43947.000000
[Fri Jun  1 00:33:39 2012] Offset between fit and detection position for source 2 = 0.263056 pixels
[Fri Jun  1 00:33:39 2012] 46163.200000 total counts/ 12209.800000 bgd. counts: snr = 307.276251
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.263056 pixels
  Position = (309.3, 317.6) = 16 35 53.12 -28 12 58.8
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 33953.4 +/- 214.9
  Background counts = 12209.8
  Rate = 2 +/- 0.01
[Fri Jun  1 00:33:39 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 00:33:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 00:33:39 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 00:33:39 2012] Source does appear to be extended
[Fri Jun  1 00:33:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 00:39:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 00:39:24 2012] Initial guess for spatial extent in simple fitting = 5.97"
[Fri Jun  1 00:39:24 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.855
[Fri Jun  1 00:39:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.97"
[Fri Jun  1 02:39:28 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 02:39:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 02:39:28 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 02:39:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 02:39:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 02:39:28 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 02:39:28 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 02:39:28 2012] Fit fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 02:39:31 2012] Spatial fit model total counts = 45857.900000, observed total counts = 43947.000000
[Fri Jun  1 02:39:31 2012] Offset between fit and detection position for source 2 = 0.000325 pixels
[Fri Jun  1 02:39:31 2012] 46055.200000 total counts/ 12133.300000 bgd. counts: snr = 307.957441
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000325 pixels
  Position = (309.3, 317.6) = 16 35 53.12 -28 12 58.8
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 33921.9 +/- 214.6
  Background counts = 12133.3
  Rate = 2 +/- 0.01
[Fri Jun  1 02:39:31 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 02:39:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 02:39:31 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 02:39:31 2012] Source does appear to be extended
[Fri Jun  1 02:39:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 02:58:31 2012] Counts = 33921.900000, rescaling region sizes by 3.000000
[Fri Jun  1 02:58:31 2012] XMMSAS src. selection expression = ellipse(26863.758600, 27581.628000, 1075.633231, 1075.633231, 0.000000, X, Y)
[Fri Jun  1 02:58:31 2012] Writing source region out to fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  1 02:58:31 2012] Extracting stamp from image fullrun_mos2_xmm0112540101_pi300-10000_cl_sm2.00.img.gz, (248, 256) - (371, 379)
[Fri Jun  1 02:58:31 2012] XMMSAS bgd. selection expression = annulus(26863.758600, 27581.628000, 5378.166155, 10756.332310, X, Y) && !ellipse(30256.562400, 20765.524200, 446.716813, 446.716813, 0.000000, X, Y) && !ellipse(27781.981720, 27091.528076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27615.028168, 28304.154297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.204437, 27609.460571, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 02:58:31 2012] Writing fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src2.gif
[Fri Jun  1 02:58:37 2012] Mean detx,y = (31.68, -112.68) 
[Fri Jun  1 02:58:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 03:03:23 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 03:03:23 2012] Setting source spectrum file to fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 03:03:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  1 03:12:43 2012] Updating aperture counts using extracted products
[Fri Jun  1 03:12:43 2012] Error reading totcts from fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 03:12:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 03:12:43 2012] Using photon index=1.80, rate=1.51, arf fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 03:12:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 03:12:43 2012] Updating source flux to 1.8e-11
[Fri Jun  1 03:13:38 2012] Reading fit data from xmm0112540101/analysis//spectral/fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jun  1 03:13:38 2012] Spectral fit parameter nH value = 5.77116e+21
[Fri Jun  1 03:13:38 2012] Spectral fit parameter PhoIndex value = 6.27815
[Fri Jun  1 03:13:38 2012] Failed to get F(0.3-8.0) from xmm0112540101/analysis//spectral/fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 03:13:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 03:13:38 2012] Using Nh = 5.8e+21, photon index=6.28, rate=1.51, arf fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 03:13:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 03:13:38 2012] Updating source flux to 1.1e-11