[Thu May 31 22:31:40 2012] Detection parameters:
  Position = (348.2, 239.1) = 16 35 40.31 -28 18 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 342.4 +/- 22.6
  Background counts = 12.0
  Rate = 0.02 +/- 0.001

[Thu May 31 22:31:41 2012] Off-axis axis estimate = 5.61'
[Thu May 31 23:10:01 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Thu May 31 23:10:01 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Thu May 31 23:10:01 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.872
[Thu May 31 23:10:01 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.24"
[Fri Jun  1 00:33:30 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun  1 00:33:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src2.csv
[Fri Jun  1 00:33:30 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun  1 00:33:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src2.csv
[Fri Jun  1 00:33:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 00:33:30 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun  1 00:33:30 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun  1 00:33:30 2012] Fit fullrun_mos2_xmm0112540101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jun  1 00:33:39 2012] Spatial fit model total counts = 387.102000, observed total counts = 373.000000
[Fri Jun  1 00:33:39 2012] Offset between fit and detection position for source 1 = 0.166331 pixels
[Fri Jun  1 00:33:39 2012] 384.799000 total counts/ 138.304000 bgd. counts: snr = 20.959974
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.166331 pixels
  Position = (348.3, 239.2) = 16 35 40.27 -28 18 39.5
  Extent = 5.6 (4.9-6.1)", rotation angle = 0
  Source counts = 246.5 +/- 19.6
  Background counts = 138.3
  Rate = 0.01 +/- 0.0009
[Fri Jun  1 00:33:39 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 00:33:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 00:33:39 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 00:33:39 2012] Source does appear to be extended
[Fri Jun  1 00:33:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 00:39:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 00:39:24 2012] Initial guess for spatial extent in simple fitting = 5.58"
[Fri Jun  1 00:39:24 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.943
[Fri Jun  1 00:39:24 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.58"
[Fri Jun  1 02:39:28 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun  1 02:39:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src2.csv
[Fri Jun  1 02:39:28 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun  1 02:39:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src2.csv
[Fri Jun  1 02:39:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 02:39:28 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun  1 02:39:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun  1 02:39:28 2012] fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun  1 02:39:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun  1 02:39:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112540101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 02:39:31 2012] Warning, spatial fit 2 centroid is now closest to src. 16
[Fri Jun  1 02:39:31 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 02:39:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 02:39:31 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 02:39:31 2012] Source does appear to be extended
[Fri Jun  1 02:39:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 02:58:31 2012] XMMSAS src. selection expression = ellipse(30256.562400, 20765.524200, 335.037610, 335.037610, 0.000000, X, Y)
[Fri Jun  1 02:58:31 2012] Writing source region out to fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  1 02:58:31 2012] Extracting stamp from image fullrun_mos2_xmm0112540101_pi300-10000_cl_sm2.00.img.gz, (329, 220) - (368, 258)
[Fri Jun  1 02:58:31 2012] XMMSAS bgd. selection expression = annulus(30256.562400, 20765.524200, 558.396016, 1116.792032, X, Y)
[Fri Jun  1 02:58:31 2012] Writing fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src1.gif
[Fri Jun  1 03:03:26 2012] Mean detx,y = (-2401.61, -7323.30) 
[Fri Jun  1 03:03:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 03:03:40 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 03:03:40 2012] Setting source spectrum file to fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 03:03:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  1 03:12:43 2012] Updating aperture counts using extracted products
[Fri Jun  1 03:12:43 2012] Error reading totcts from fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 03:12:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 03:12:43 2012] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0112540101_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 03:12:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 03:12:43 2012] Updating source flux to 2.1e-13