[Fri Aug 31 10:38:52 2012] Detection parameters:
  Position = (227.1, 247.8) = 5 41 1.90 -1 58 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3373.0 +/- 70.9
  Background counts = 32.9
  Rate = 0.1 +/- 0.003

[Fri Aug 31 10:38:53 2012] Off-axis axis estimate = 6.34'
[Fri Aug 31 10:41:41 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 10:41:41 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Fri Aug 31 10:41:41 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.228
[Fri Aug 31 10:41:41 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.60"
[Fri Aug 31 12:56:10 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Aug 31 12:56:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src4.csv
[Fri Aug 31 12:56:10 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Aug 31 12:56:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src4.csv
[Fri Aug 31 12:56:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 12:56:12 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Aug 31 12:56:12 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Aug 31 12:56:12 2012] Fit fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Aug 31 17:06:35 2012] Spatial fit model total counts = 3311.040000, observed total counts = 3319.000000
[Fri Aug 31 17:06:35 2012] Offset between fit and detection position for source 4 = 0.096782 pixels
[Fri Aug 31 17:06:35 2012] 3318.990000 total counts/ 946.250000 bgd. counts: snr = 77.134240
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.096782 pixels
  Position = (227.1, 247.7) = 5 41 1.90 -1 58 57.0
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2372.7 +/- 57.6
  Background counts = 946.2
  Rate = 0.06 +/- 0.002
[Fri Aug 31 17:06:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:06:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:06:35 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 17:06:35 2012] Source does appear to be extended
[Fri Aug 31 17:06:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:06:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 17:06:59 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Fri Aug 31 17:06:59 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.239
[Fri Aug 31 17:06:59 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.64"
[Fri Aug 31 18:46:57 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 31 18:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 31 18:46:57 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 31 18:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 31 18:46:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 18:46:58 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 31 18:46:58 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 31 18:46:58 2012] Fit fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 31 21:46:54 2012] Spatial fit model total counts = 3327.210000, observed total counts = 3327.000000
[Fri Aug 31 21:46:54 2012] Offset between fit and detection position for source 4 = 0.011082 pixels
[Fri Aug 31 21:46:54 2012] 3348.668000 total counts/ 971.278000 bgd. counts: snr = 76.283157
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.011082 pixels
  Position = (227.1, 247.7) = 5 41 1.90 -1 58 57.0
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2377.4 +/- 57.9
  Background counts = 971.3
  Rate = 0.06 +/- 0.002
[Fri Aug 31 21:46:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:46:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:46:54 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 21:46:54 2012] Source does appear to be extended
[Fri Aug 31 21:46:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 21:47:15 2012] Counts = 2377.390000, rescaling region sizes by 2.000000
[Fri Aug 31 21:47:15 2012] XMMSAS src. selection expression = ellipse(19710.689160, 21502.993800, 675.374419, 675.374419, 0.000000, X, Y)
[Fri Aug 31 21:47:15 2012] Writing source region out to fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src4_src.reg
[Fri Aug 31 21:47:15 2012] Extracting stamp from image fullrun_pn_xmm0112530101_pi300-10000_cl_sm2.00.img.gz, (188, 209) - (266, 287)
[Fri Aug 31 21:47:15 2012] XMMSAS bgd. selection expression = annulus(19710.689160, 21502.993800, 2251.248065, 4502.496130, X, Y) && !ellipse(22084.346200, 16614.346400, 479.748014, 479.748014, 0.000000, X, Y) && !ellipse(24603.629600, 24388.819000, 1669.144848, 1669.144848, 0.000000, X, Y) && !ellipse(21174.820511, 20256.310471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22523.786469, 19336.747711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19341.830765, 25709.840210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20474.111816, 24821.387756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19613.076523, 22758.339722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24795.039246, 23012.590637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23545.040833, 22963.796509, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 21:47:15 2012] Writing fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src4.gif
[Fri Aug 31 21:51:42 2012] Mean detx,y = (4929.05, -3220.65) 
[Fri Aug 31 21:51:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 21:52:11 2012] grppha failed
[Fri Aug 31 21:52:12 2012] Setting source spectrum file to fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Aug 31 21:52:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Aug 31 22:38:35 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:38:35 2012] Error reading totcts from fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Aug 31 22:38:36 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:38:40 2012] Source 4 has no response, skipping
[Fri Aug 31 22:38:41 2012] xmm0112530101/analysis//spectral/fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete