[Fri Aug 31 10:38:52 2012] Detection parameters:
  Position = (259.5, 222.8) = 5 40 52.51 -2 0 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1718.0 +/- 50.8
  Background counts = 31.6
  Rate = 0.06 +/- 0.002

[Fri Aug 31 10:38:53 2012] Off-axis axis estimate = 6.17'
[Fri Aug 31 10:41:41 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 10:41:41 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Fri Aug 31 10:41:41 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.039
[Fri Aug 31 10:41:41 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.51"
[Fri Aug 31 12:56:10 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src12.ximg exists
[Fri Aug 31 12:56:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src12.csv
[Fri Aug 31 12:56:10 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Aug 31 12:56:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src12.csv
[Fri Aug 31 12:56:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 12:56:12 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Aug 31 12:56:12 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Aug 31 12:56:12 2012] Fit fullrun_pn_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Aug 31 17:06:35 2012] Warning, spatial fit 12 centroid is now closest to src. 11
[Fri Aug 31 17:06:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:06:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:06:35 2012] Assessing source extent using major
[Fri Aug 31 17:06:35 2012] Source does appear to be extended
[Fri Aug 31 17:06:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:06:59 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 17:06:59 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Fri Aug 31 17:06:59 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.039
[Fri Aug 31 17:06:59 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.51"
[Fri Aug 31 18:46:57 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Aug 31 18:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src11.csv
[Fri Aug 31 18:46:57 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Aug 31 18:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src11.csv
[Fri Aug 31 18:46:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 18:46:58 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Aug 31 18:46:58 2012] fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Aug 31 18:46:58 2012] Fit fullrun_pn_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Aug 31 21:46:54 2012] Warning, spatial fit 11 centroid is now closest to src. 11
[Fri Aug 31 21:46:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:46:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:46:54 2012] Assessing source extent using major
[Fri Aug 31 21:46:54 2012] Source does appear to be extended
[Fri Aug 31 21:46:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 21:47:15 2012] Counts = 1718.028687, rescaling region sizes by 2.000000
[Fri Aug 31 21:47:15 2012] XMMSAS src. selection expression = ellipse(22523.786469, 19336.747711, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Aug 31 21:47:15 2012] Writing source region out to fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src12_src.reg
[Fri Aug 31 21:47:15 2012] Extracting stamp from image fullrun_pn_xmm0112530101_pi300-10000_cl_sm2.00.img.gz, (184, 148) - (334, 298)
[Fri Aug 31 21:47:15 2012] XMMSAS bgd. selection expression = annulus(22523.786469, 19336.747711, 4350.000000, 8700.000000, X, Y) && !ellipse(22084.346200, 16614.346400, 479.748014, 479.748014, 0.000000, X, Y) && !ellipse(24603.629600, 24388.819000, 1669.144848, 1669.144848, 0.000000, X, Y) && !ellipse(19710.689160, 21502.993800, 450.249613, 450.249613, 0.000000, X, Y) && !ellipse(14077.548859, 21455.001770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21174.820511, 20256.310471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28823.300140, 17790.721497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25903.450256, 13465.621689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24840.043460, 28659.105000, 911.928026, 911.928026, 0.000000, X, Y) && !ellipse(24752.868160, 27749.514800, 628.600018, 628.600018, 0.000000, X, Y) && !ellipse(24735.484283, 27003.782013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19341.830765, 25709.840210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20474.111816, 24821.387756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25350.030640, 22930.643158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19613.076523, 22758.339722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24795.039246, 23012.590637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23545.040833, 22963.796509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26394.394379, 20937.002899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25729.262200, 19938.898200, 404.832012, 404.832012, 0.000000, X, Y) && !ellipse(28913.879120, 19541.945633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13125.152679, 16036.927292, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 21:47:15 2012] Writing fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src12.gif
[Fri Aug 31 21:57:19 2012] Mean detx,y = (1985.89, -5256.52) 
[Fri Aug 31 21:57:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 21:59:27 2012] grppha failed
[Fri Aug 31 21:59:27 2012] Setting source spectrum file to fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src12_src.pi.gz
[Fri Aug 31 21:59:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Aug 31 22:15:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 31 22:15:57 2012] rmf not generated due to insufficient counts
[Fri Aug 31 22:38:35 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:38:35 2012] Error reading totcts from fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src12_src.pi.gz
[Fri Aug 31 22:38:36 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:38:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 22:38:41 2012] xmm0112530101/analysis//spectral/fullrun_pn_xmm0112530101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete