[Fri Aug 31 10:39:45 2012] Detection parameters:
  Position = (265.0, 98.3) = 5 40 50.91 -2 9 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 403.8 +/- 23.9
  Background counts = 8.8
  Rate = 0.01 +/- 0.0006

[Fri Aug 31 10:39:46 2012] Off-axis axis estimate = 14.71'
[Fri Aug 31 14:55:52 2012] Using EEF radius (= 13.78 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 14:55:52 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Fri Aug 31 14:55:52 2012] source mask rpix=3.2, npix_max = 53, mask sum = 51, frac = 0.947
[Fri Aug 31 14:55:52 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.78"
[Fri Aug 31 17:06:24 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_src10.ximg exists
[Fri Aug 31 17:06:24 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Aug 31 17:06:24 2012] Fit fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_src10 appears to have run properly
[Fri Aug 31 17:06:24 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Aug 31 17:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Aug 31 17:06:24 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Aug 31 17:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Aug 31 17:06:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:06:47 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 17.699994 pixels away
[Fri Aug 31 17:06:47 2012] Source 29 is offset by 8.042256 and 0.282505 pixels which is larger than
2 X fitted extent = 1.555821 x 1.555821, not incorporating fit results
[Fri Aug 31 17:06:47 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:06:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:06:47 2012] Assessing source extent using major
[Fri Aug 31 17:06:47 2012] Source does appear to be extended
[Fri Aug 31 17:06:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 19:59:57 2012] Using EEF radius (= 13.78 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 19:59:57 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Fri Aug 31 19:59:57 2012] source mask rpix=3.2, npix_max = 53, mask sum = 51, frac = 0.947
[Fri Aug 31 19:59:57 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.78"
[Fri Aug 31 21:46:45 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src10.ximg exists
[Fri Aug 31 21:46:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src10.csv
[Fri Aug 31 21:46:45 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Aug 31 21:46:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src10.csv
[Fri Aug 31 21:46:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:46:46 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Aug 31 21:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Aug 31 21:46:46 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Aug 31 21:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Aug 31 21:46:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:47:03 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 17.841106 pixels away
[Fri Aug 31 21:47:03 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:47:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:47:03 2012] Assessing source extent using major
[Fri Aug 31 21:47:03 2012] Source does appear to be extended
[Fri Aug 31 21:47:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 22:24:01 2012] XMMSAS src. selection expression = ellipse(23005.528259, 8506.725899, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 22:24:01 2012] Writing source region out to fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src29_src.reg
[Fri Aug 31 22:24:01 2012] Extracting stamp from image fullrun_mos2_xmm0112530101_pi300-10000_cl_sm2.00.img.gz, (227, 61) - (302, 136)
[Fri Aug 31 22:24:01 2012] XMMSAS bgd. selection expression = annulus(23005.528259, 8506.725899, 1087.500000, 2175.000000, X, Y) && !ellipse(21255.453000, 9514.555000, 950.432027, 277.304008, 16.901354, X, Y)
[Fri Aug 31 22:24:01 2012] Writing fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src29.gif
[Fri Aug 31 22:28:02 2012] Mean detx,y = (-741.94, 15878.21) 
[Fri Aug 31 22:28:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 22:28:14 2012] grppha failed
[Fri Aug 31 22:28:14 2012] Setting source spectrum file to fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src29_src.pi.gz
[Fri Aug 31 22:28:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Aug 31 22:37:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 31 22:37:44 2012] rmf not generated due to insufficient counts
[Fri Aug 31 22:38:36 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:38:36 2012] Error reading totcts from fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src29_src.pi.gz
[Fri Aug 31 22:38:37 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:38:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 22:38:40 2012] xmm0112530101/analysis//spectral/fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete