[Fri Aug 31 10:39:45 2012] Detection parameters:
  Position = (107.1, 333.7) = 5 41 36.73 -1 52 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.8 +/- 15.6
  Background counts = 19.1
  Rate = 0.003 +/- 0.0004

[Fri Aug 31 10:39:46 2012] Off-axis axis estimate = 14.11'
[Fri Aug 31 14:55:52 2012] Using EEF radius (= 13.48 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 14:55:52 2012] Initial guess for spatial extent in simple fitting = 13.48"
[Fri Aug 31 14:55:52 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.081
[Fri Aug 31 14:55:52 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 13.48"
[Fri Aug 31 17:06:24 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_src28.ximg exists
[Fri Aug 31 17:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_src28.csv
[Fri Aug 31 17:06:24 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Aug 31 17:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_src28.csv
[Fri Aug 31 17:06:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:06:25 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Aug 31 17:06:25 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Aug 31 17:06:25 2012] Fit fullrun_mos2_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Aug 31 17:06:47 2012] Source 12 is offset by -5.183672 and 4.977220 pixels which is larger than
2 X fitted extent = 1.469140 x 1.469140, not incorporating fit results
[Fri Aug 31 17:06:47 2012] Warning, spatial fit 28 centroid is now closest to src. 14
[Fri Aug 31 17:06:47 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:06:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:06:47 2012] Assessing source extent using major
[Fri Aug 31 17:06:47 2012] Source does appear to be extended
[Fri Aug 31 17:06:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:06:47 2012] Source is confused with source 33
[Fri Aug 31 19:59:57 2012] Using EEF radius (= 13.48 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 19:59:57 2012] Initial guess for spatial extent in simple fitting = 13.48"
[Fri Aug 31 19:59:57 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.081
[Fri Aug 31 19:59:57 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 13.48"
[Fri Aug 31 21:46:46 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src27.ximg exists
[Fri Aug 31 21:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src27.csv
[Fri Aug 31 21:46:46 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Aug 31 21:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src27.csv
[Fri Aug 31 21:46:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:46:46 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Aug 31 21:46:46 2012] fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Aug 31 21:46:46 2012] Fit fullrun_mos2_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Aug 31 21:47:03 2012] Warning, spatial fit 27 centroid is now closest to src. 33
[Fri Aug 31 21:47:03 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:47:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:47:03 2012] Assessing source extent using major
[Fri Aug 31 21:47:03 2012] Source does appear to be extended
[Fri Aug 31 21:47:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 22:24:02 2012] XMMSAS src. selection expression = ellipse(9265.998566, 28986.040161, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 22:24:02 2012] Writing source region out to fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src12_src.reg
[Fri Aug 31 22:24:02 2012] Extracting stamp from image fullrun_mos2_xmm0112530101_pi300-10000_cl_sm2.00.img.gz, (70, 296) - (145, 371)
[Fri Aug 31 22:24:02 2012] XMMSAS bgd. selection expression = annulus(9265.998566, 28986.040161, 1087.500000, 2175.000000, X, Y) && !ellipse(10117.490380, 28183.446000, 519.355215, 519.355215, 0.000000, X, Y) && !ellipse(9104.994000, 27576.398000, 732.948021, 732.948021, 0.000000, X, Y) && !ellipse(8820.606117, 28402.746155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8531.831192, 29690.791138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8500.794563, 27189.007477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9934.744000, 26615.163600, 321.352009, 321.352009, 0.000000, X, Y) && !ellipse(7343.092000, 26424.678000, 2192.560063, 2192.560063, 0.000000, X, Y) && !ellipse(8925.173782, 26855.033997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10759.513700, 27483.541554, 321.796693, 258.305607, 90.000000, X, Y) && !ellipse(7910.035278, 27514.699921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10469.816000, 28994.820000, 2065.192059, 584.690417, 307.691000, X, Y) && !ellipse(11509.026000, 26861.176000, 2045.048059, 2043.024059, 359.958000, X, Y) && !ellipse(11370.704000, 25974.860000, 2042.960059, 2042.960059, 0.000000, X, Y)
[Fri Aug 31 22:24:02 2012] Writing fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src12.gif
[Fri Aug 31 22:31:05 2012] Mean detx,y = (-15770.51, -3538.28) 
[Fri Aug 31 22:31:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 22:31:11 2012] grppha failed
[Fri Aug 31 22:31:11 2012] Setting source spectrum file to fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src12_src.pi.gz
[Fri Aug 31 22:31:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Aug 31 22:37:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 31 22:37:46 2012] rmf not generated due to insufficient counts
[Fri Aug 31 22:38:37 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:38:37 2012] Error reading totcts from fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src12_src.pi.gz
[Fri Aug 31 22:38:37 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:38:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 22:38:40 2012] xmm0112530101/analysis//spectral/fullrun_mos2_xmm0112530101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete