[Fri Aug 31 10:39:23 2012] Detection parameters:
  Position = (124.3, 316.8) = 5 41 31.73 -1 53 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.9 +/- 15.0
  Background counts = 14.5
  Rate = 0.003 +/- 0.0004

[Fri Aug 31 10:39:23 2012] Off-axis axis estimate = 12.70'
[Fri Aug 31 12:56:13 2012] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 12:56:13 2012] Initial guess for spatial extent in simple fitting = 12.78"
[Fri Aug 31 12:56:13 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.037
[Fri Aug 31 12:56:13 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 12.78"
[Fri Aug 31 14:55:51 2012] fullrun_mos1_xmm0112530101_pi300-10000_cl_pass0_src25.ximg exists
[Fri Aug 31 14:55:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112530101_pi300-10000_cl_pass0_src25.csv
[Fri Aug 31 14:55:51 2012] fullrun_mos1_xmm0112530101_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Aug 31 14:55:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112530101_pi300-10000_cl_pass0_src25.csv
[Fri Aug 31 14:55:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112530101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112530101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 14:55:52 2012] fullrun_mos1_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Aug 31 14:55:52 2012] fullrun_mos1_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Aug 31 14:55:52 2012] Fit fullrun_mos1_xmm0112530101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Aug 31 17:06:41 2012] Warning, spatial fit 25 centroid is now closest to src. 7
[Fri Aug 31 17:06:41 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:06:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:06:41 2012] Assessing source extent using major
[Fri Aug 31 17:06:41 2012] Source does appear to be extended
[Fri Aug 31 17:06:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 18:46:59 2012] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 18:46:59 2012] Initial guess for spatial extent in simple fitting = 12.78"
[Fri Aug 31 18:46:59 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.037
[Fri Aug 31 18:46:59 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 12.78"
[Fri Aug 31 19:59:56 2012] fullrun_mos1_xmm0112530101_pi300-10000_cl_pass1_src25.ximg exists
[Fri Aug 31 19:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112530101_pi300-10000_cl_pass1_src25.csv
[Fri Aug 31 19:59:56 2012] fullrun_mos1_xmm0112530101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Aug 31 19:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112530101_pi300-10000_cl_pass1_src25.csv
[Fri Aug 31 19:59:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112530101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112530101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 19:59:56 2012] fullrun_mos1_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Aug 31 19:59:56 2012] fullrun_mos1_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Aug 31 19:59:56 2012] Fit fullrun_mos1_xmm0112530101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Aug 31 21:46:58 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 10.439623 pixels away
[Fri Aug 31 21:46:58 2012] Warning, spatial fit 25 centroid is now closest to src. 7
[Fri Aug 31 21:46:58 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:46:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:46:58 2012] Assessing source extent using major
[Fri Aug 31 21:46:58 2012] Source does appear to be extended
[Fri Aug 31 21:46:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 22:16:01 2012] XMMSAS src. selection expression = ellipse(10765.847183, 27516.428345, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 22:16:01 2012] Writing source region out to fullrun_mos1_xmm0112530101_pi300-10000_pass1_cl_src21_src.reg
[Fri Aug 31 22:16:01 2012] Extracting stamp from image fullrun_mos1_xmm0112530101_pi300-10000_cl_sm2.00.img.gz, (87, 279) - (162, 354)
[Fri Aug 31 22:16:01 2012] XMMSAS bgd. selection expression = annulus(10765.847183, 27516.428345, 1087.500000, 2175.000000, X, Y) && !ellipse(10112.780000, 28174.402000, 447.267213, 447.267213, 0.000000, X, Y) && !ellipse(9120.777000, 27543.496000, 708.914420, 708.914420, 0.000000, X, Y) && !ellipse(8815.111534, 28402.690399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8530.454000, 29672.022000, 350.374410, 350.374410, 0.000000, X, Y) && !ellipse(8516.215637, 27198.501862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9935.460000, 26591.165720, 424.163212, 424.163212, 0.000000, X, Y) && !ellipse(8975.052490, 26939.113464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8107.344000, 25942.966000, 1478.760043, 1478.760043, 0.000000, X, Y) && !ellipse(9266.554131, 28989.651001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7927.425720, 27171.763062, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 22:16:01 2012] Writing fullrun_mos1_xmm0112530101_pi300-10000_pass1_cl_src21.gif
[Fri Aug 31 22:22:43 2012] Mean detx,y = (-2284.22, 13952.92) 
[Fri Aug 31 22:22:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 22:22:49 2012] grppha failed
[Fri Aug 31 22:22:49 2012] Setting source spectrum file to fullrun_mos1_xmm0112530101_pi300-10000_pass1_cl_src21_src.pi.gz
[Fri Aug 31 22:22:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112530101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Aug 31 22:24:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 31 22:24:01 2012] rmf not generated due to insufficient counts
[Fri Aug 31 22:38:36 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:38:36 2012] Error reading totcts from fullrun_mos1_xmm0112530101_pi300-10000_pass1_cl_src21_src.pi.gz
[Fri Aug 31 22:38:36 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:38:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 22:38:39 2012] xmm0112530101/analysis//spectral/fullrun_mos1_xmm0112530101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete