[Tue Jun 26 07:57:41 2012] Detection parameters:
  Position = (307.4, 375.5) = 12 25 42.27 33 40 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.6 +/- 15.0
  Background counts = 5.8
  Rate = 0.02 +/- 0.002

[Tue Jun 26 07:57:42 2012] Off-axis axis estimate = 5.63'
[Tue Jun 26 07:59:05 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 07:59:05 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Tue Jun 26 07:59:05 2012] source mask rpix=2.1, npix_max = 27, mask sum = 12, frac = 0.436
[Tue Jun 26 07:59:05 2012] Skipping simple spatial due to low active detector fraction
[Tue Jun 26 09:29:35 2012] Spatial fit model total counts = 184.209000, observed total counts = 196.000000
[Tue Jun 26 09:29:35 2012] Offset between fit and detection position for source 6 = 0.805878 pixels
[Tue Jun 26 09:29:35 2012] Warning, changing simple spatial fit ID from -1 to 11
[Tue Jun 26 09:29:35 2012] 187.655000 total counts/ 114.756000 bgd. counts: snr = 6.805090
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.805878 pixels
  Position = (306.6, 375.7) = 12 25 42.54 33 40 2.2
  Extent = 5.6 (4.0-7.7)", rotation angle = 0
  Source counts = 72.9 +/- 13.7
  Background counts = 114.8
  Rate = 0.01 +/- 0.002
[Tue Jun 26 09:29:35 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 09:29:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 09:29:35 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 09:29:35 2012] Source does appear to be extended
[Tue Jun 26 09:29:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 09:29:35 2012] Source is confused with source 14
[Tue Jun 26 09:29:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 26 09:29:48 2012] Initial guess for spatial extent in simple fitting = 5.59"
[Tue Jun 26 09:29:48 2012] source mask rpix=1.3, npix_max = 12, mask sum = 7, frac = 0.549
[Tue Jun 26 09:29:48 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.59"
[Tue Jun 26 10:10:35 2012] fullrun_pn_xmm0112522701_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jun 26 10:10:35 2012] fullrun_pn_xmm0112522701_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jun 26 10:10:35 2012] Fit fullrun_pn_xmm0112522701_pi300-10000_cl_pass1_src5 appears to have run properly
[Tue Jun 26 10:10:36 2012] fullrun_pn_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jun 26 10:10:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jun 26 10:10:36 2012] fullrun_pn_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jun 26 10:10:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jun 26 10:10:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 11:13:46 2012] Warning, spatial fit 5 centroid is now closest to src. 14
[Tue Jun 26 11:13:46 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 11:13:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 11:13:46 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 11:13:46 2012] Source does appear to be extended
[Tue Jun 26 11:13:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 11:14:07 2012] XMMSAS src. selection expression = ellipse(26625.938000, 32633.265200, 335.665700, 335.665700, 0.000000, X, Y)
[Tue Jun 26 11:14:07 2012] Writing source region out to fullrun_pn_xmm0112522701_pi300-10000_pass1_cl_src6_src.reg
[Tue Jun 26 11:14:07 2012] Extracting stamp from image fullrun_pn_xmm0112522701_pi300-10000_cl_sm2.00.img.gz, (287, 356) - (326, 395)
[Tue Jun 26 11:14:07 2012] XMMSAS bgd. selection expression = annulus(26625.938000, 32633.265200, 559.442833, 1118.885666, X, Y) && !ellipse(26032.436890, 32493.793182, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 11:14:07 2012] Writing fullrun_pn_xmm0112522701_pi300-10000_pass1_cl_src6.gif
[Tue Jun 26 11:24:10 2012] Mean detx,y = (-3551.44, 7741.57) 
[Tue Jun 26 11:24:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 11:24:36 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 11:24:37 2012] Setting source spectrum file to fullrun_pn_xmm0112522701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 26 11:24:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112522701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun 26 11:48:55 2012] Not generating rmf since there are only 72 counts
[Tue Jun 26 11:48:55 2012] rmf not generated due to insufficient counts
[Tue Jun 26 12:35:10 2012] Updating aperture counts using extracted products
[Tue Jun 26 12:35:10 2012] Error reading totcts from fullrun_pn_xmm0112522701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 26 12:35:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 12:35:12 2012] Using photon index=1.80, rate=0.0111, arf fullrun_pn_xmm0112522701_pi300-10000_pass1_cl_src6.arf
[Tue Jun 26 12:35:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 12:35:12 2012] Updating source flux to 5.7e-14
[Tue Jun 26 12:36:36 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Tue Jun 26 12:36:36 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting