[Tue Jun 26 07:58:23 2012] Detection parameters:
  Position = (288.6, 276.2) = 12 25 48.81 33 32 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3161.1 +/- 65.2
  Background counts = 5.8
  Rate = 0.4 +/- 0.008

[Tue Jun 26 07:58:23 2012] Off-axis axis estimate = 1.76'
[Tue Jun 26 09:05:29 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 09:05:29 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Jun 26 09:05:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.999
[Tue Jun 26 09:05:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Tue Jun 26 09:29:29 2012] fullrun_mos2_xmm0112522701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 26 09:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112522701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 26 09:29:29 2012] fullrun_mos2_xmm0112522701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 26 09:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112522701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 26 09:29:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112522701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112522701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 09:29:30 2012] fullrun_mos2_xmm0112522701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 26 09:29:30 2012] fullrun_mos2_xmm0112522701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 26 09:29:30 2012] Fit fullrun_mos2_xmm0112522701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 26 09:29:41 2012] Spatial fit model total counts = 2837.540000, observed total counts = 2809.000000
[Tue Jun 26 09:29:41 2012] Offset between fit and detection position for source 2 = 0.148920 pixels
[Tue Jun 26 09:29:41 2012] 2843.098000 total counts/ 507.328000 bgd. counts: snr = 103.701648
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.148920 pixels
  Position = (288.6, 276.3) = 12 25 48.80 33 32 50.1
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2335.8 +/- 53.3
  Background counts = 507.3
  Rate = 0.3 +/- 0.007
[Tue Jun 26 09:29:41 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 09:29:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 09:29:41 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 09:29:41 2012] Source does appear to be extended
[Tue Jun 26 09:29:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 10:38:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:38:52 2012] Initial guess for spatial extent in simple fitting = 5.58"
[Tue Jun 26 10:38:52 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.707
[Tue Jun 26 10:38:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.58"
[Tue Jun 26 11:13:37 2012] fullrun_mos2_xmm0112522701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 26 11:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112522701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 26 11:13:37 2012] fullrun_mos2_xmm0112522701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 26 11:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112522701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 26 11:13:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112522701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112522701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 11:13:37 2012] fullrun_mos2_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 26 11:13:37 2012] fullrun_mos2_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 26 11:13:37 2012] Fit fullrun_mos2_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 26 11:13:54 2012] Spatial fit model total counts = 2831.920000, observed total counts = 2809.000000
[Tue Jun 26 11:13:54 2012] Offset between fit and detection position for source 2 = 0.005011 pixels
[Tue Jun 26 11:13:54 2012] 2837.334000 total counts/ 505.834000 bgd. counts: snr = 103.664823
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.005011 pixels
  Position = (288.6, 276.3) = 12 25 48.80 33 32 50.1
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2331.5 +/- 53.3
  Background counts = 505.8
  Rate = 0.3 +/- 0.007
[Tue Jun 26 11:13:54 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 11:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 11:13:54 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 11:13:54 2012] Source does appear to be extended
[Tue Jun 26 11:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 12:16:31 2012] Counts = 2331.500000, rescaling region sizes by 2.000000
[Tue Jun 26 12:16:31 2012] XMMSAS src. selection expression = ellipse(25062.873200, 23991.626000, 671.391619, 671.391619, 0.000000, X, Y)
[Tue Jun 26 12:16:31 2012] Writing source region out to fullrun_mos2_xmm0112522701_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 26 12:16:31 2012] Extracting stamp from image fullrun_mos2_xmm0112522701_pi300-10000_cl_sm2.00.img.gz, (250, 238) - (327, 315)
[Tue Jun 26 12:16:31 2012] XMMSAS bgd. selection expression = annulus(25062.873200, 23991.626000, 2237.972064, 4475.944129, X, Y) && !ellipse(21928.721800, 22440.867800, 371.333611, 371.333611, 0.000000, X, Y) && !ellipse(24983.979095, 23130.890778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22309.220276, 24672.260071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25493.854200, 27928.768600, 504.845615, 504.845615, 0.000000, X, Y)
[Tue Jun 26 12:16:31 2012] Writing fullrun_mos2_xmm0112522701_pi300-10000_pass1_cl_src2.gif
[Tue Jun 26 12:16:34 2012] Mean detx,y = (-143.41, 4.30) 
[Tue Jun 26 12:16:36 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 12:17:02 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 12:17:02 2012] Setting source spectrum file to fullrun_mos2_xmm0112522701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 26 12:17:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112522701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 26 12:35:15 2012] Updating aperture counts using extracted products
[Tue Jun 26 12:35:15 2012] Error reading totcts from fullrun_mos2_xmm0112522701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 26 12:35:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 12:35:16 2012] Using photon index=1.80, rate=0.285, arf fullrun_mos2_xmm0112522701_pi300-10000_pass1_cl_src2.arf
[Tue Jun 26 12:35:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 12:35:16 2012] Updating source flux to 3e-12
[Tue Jun 26 12:36:36 2012] Reading fit data from xmm0112522701/analysis//spectral/fullrun_mos2_xmm0112522701_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jun 26 12:36:36 2012] Spectral fit parameter nH value = 83928800000.0
[Tue Jun 26 12:36:36 2012] Spectral fit parameter PhoIndex value = 0.63885
[Tue Jun 26 12:36:36 2012] Failed to get F(0.3-8.0) from xmm0112522701/analysis//spectral/fullrun_mos2_xmm0112522701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jun 26 12:36:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 12:36:36 2012] Using Nh = 8.4e+10, photon index=0.64, rate=0.285, arf fullrun_mos2_xmm0112522701_pi300-10000_pass1_cl_src2.arf
[Tue Jun 26 12:36:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 12:36:36 2012] Updating source flux to 5.8e-12