[Tue Jun 26 07:58:02 2012] Detection parameters:
  Position = (288.6, 276.2) = 12 25 48.82 33 32 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3166.3 +/- 67.2
  Background counts = 5.3
  Rate = 0.4 +/- 0.008

[Tue Jun 26 07:58:02 2012] Off-axis axis estimate = 1.77'
[Tue Jun 26 08:39:48 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 08:39:48 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Jun 26 08:39:48 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Tue Jun 26 08:39:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Tue Jun 26 09:05:29 2012] fullrun_mos1_xmm0112522701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 26 09:05:29 2012] fullrun_mos1_xmm0112522701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 26 09:05:29 2012] Fit fullrun_mos1_xmm0112522701_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Jun 26 09:05:29 2012] fullrun_mos1_xmm0112522701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 26 09:05:29 2012] fullrun_mos1_xmm0112522701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 26 09:05:29 2012] Fit fullrun_mos1_xmm0112522701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 26 09:29:38 2012] Spatial fit model total counts = 2803.380000, observed total counts = 2804.000000
[Tue Jun 26 09:29:38 2012] Offset between fit and detection position for source 2 = 0.129045 pixels
[Tue Jun 26 09:29:38 2012] 2811.705000 total counts/ 647.355000 bgd. counts: snr = 85.066045
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.129045 pixels
  Position = (288.6, 276.3) = 12 25 48.82 33 32 50.0
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 2164.3 +/- 53.0
  Background counts = 647.4
  Rate = 0.3 +/- 0.006
[Tue Jun 26 09:29:38 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 09:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 09:29:38 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 09:29:38 2012] Source does appear to be extended
[Tue Jun 26 09:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 10:10:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:10:36 2012] Initial guess for spatial extent in simple fitting = 5.42"
[Tue Jun 26 10:10:36 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.739
[Tue Jun 26 10:10:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.42"
[Tue Jun 26 10:38:51 2012] fullrun_mos1_xmm0112522701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 26 10:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112522701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 26 10:38:51 2012] fullrun_mos1_xmm0112522701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 26 10:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112522701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 26 10:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112522701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112522701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 10:38:52 2012] fullrun_mos1_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 26 10:38:52 2012] fullrun_mos1_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 26 10:38:52 2012] Fit fullrun_mos1_xmm0112522701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 26 11:13:50 2012] Spatial fit model total counts = 2804.000000, observed total counts = 2804.000000
[Tue Jun 26 11:13:50 2012] Offset between fit and detection position for source 2 = 0.002156 pixels
[Tue Jun 26 11:13:50 2012] 2811.382000 total counts/ 644.692000 bgd. counts: snr = 85.333712
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002156 pixels
  Position = (288.6, 276.3) = 12 25 48.82 33 32 50.0
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 2166.7 +/- 53.0
  Background counts = 644.7
  Rate = 0.3 +/- 0.006
[Tue Jun 26 11:13:50 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 11:13:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 11:13:50 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 11:13:50 2012] Source does appear to be extended
[Tue Jun 26 11:13:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 11:57:56 2012] Counts = 2166.690000, rescaling region sizes by 2.000000
[Tue Jun 26 11:57:56 2012] XMMSAS src. selection expression = ellipse(25058.675400, 23988.934200, 648.366019, 648.366019, 0.000000, X, Y)
[Tue Jun 26 11:57:56 2012] Writing source region out to fullrun_mos1_xmm0112522701_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 26 11:57:56 2012] Extracting stamp from image fullrun_mos1_xmm0112522701_pi300-10000_cl_sm2.00.img.gz, (251, 239) - (326, 314)
[Tue Jun 26 11:57:56 2012] XMMSAS bgd. selection expression = annulus(25058.675400, 23988.934200, 2161.220062, 4322.440124, X, Y) && !ellipse(21902.590591, 22419.674805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25008.110522, 23027.078400, 254.627207, 254.627207, 0.000000, X, Y) && !ellipse(22315.840540, 24615.730200, 360.866943, 360.866943, 0.000000, X, Y) && !ellipse(27371.098160, 23082.150600, 280.550408, 280.550408, 0.000000, X, Y) && !ellipse(25499.808807, 26363.845612, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 11:57:56 2012] Writing fullrun_mos1_xmm0112522701_pi300-10000_pass1_cl_src2.gif
[Tue Jun 26 11:57:59 2012] Mean detx,y = (216.08, -17.13) 
[Tue Jun 26 11:58:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 11:58:25 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 11:58:25 2012] Setting source spectrum file to fullrun_mos1_xmm0112522701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 26 11:58:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112522701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 26 12:35:13 2012] Updating aperture counts using extracted products
[Tue Jun 26 12:35:13 2012] Error reading totcts from fullrun_mos1_xmm0112522701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 26 12:35:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 12:35:14 2012] Using photon index=1.80, rate=0.265, arf fullrun_mos1_xmm0112522701_pi300-10000_pass1_cl_src2.arf
[Tue Jun 26 12:35:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 12:35:14 2012] Updating source flux to 2.5e-12
[Tue Jun 26 12:36:01 2012] Reading fit data from xmm0112522701/analysis//spectral/fullrun_mos1_xmm0112522701_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jun 26 12:36:01 2012] Spectral fit parameter nH value = 1.84781e+14
[Tue Jun 26 12:36:01 2012] Spectral fit parameter PhoIndex value = 0.674744
[Tue Jun 26 12:36:01 2012] Failed to get F(0.3-8.0) from xmm0112522701/analysis//spectral/fullrun_mos1_xmm0112522701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jun 26 12:36:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 12:36:01 2012] Using Nh = 1.8e+14, photon index=0.67, rate=0.265, arf fullrun_mos1_xmm0112522701_pi300-10000_pass1_cl_src2.arf
[Tue Jun 26 12:36:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 12:36:01 2012] Updating source flux to 4.7e-12