[Sat Sep 24 16:02:21 2011] Detection parameters:
  Position = (272.8, 326.3) = 23 36 28.22 2 10 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.5 +/- 7.4
  Background counts = 11.6
  Rate = 0.003 +/- 0.0008

[Sat Sep 24 16:02:21 2011] Off-axis axis estimate = 2.74'
[Sat Sep 24 16:03:42 2011] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 16:03:42 2011] Initial guess for spatial extent in simple fitting = 7.80"
[Sat Sep 24 16:03:42 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.951
[Sat Sep 24 16:03:42 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 7.80"
[Sat Sep 24 16:41:47 2011] fullrun_pn_xmm0112522601_pi300-10000_cl_pass0_src19.ximg exists
[Sat Sep 24 16:41:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522601_pi300-10000_cl_pass0_src19.csv
[Sat Sep 24 16:41:47 2011] fullrun_pn_xmm0112522601_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Sep 24 16:41:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522601_pi300-10000_cl_pass0_src19.csv
[Sat Sep 24 16:41:47 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112522601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112522601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 16:41:48 2011] fullrun_pn_xmm0112522601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Sep 24 16:41:48 2011] fullrun_pn_xmm0112522601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Sep 24 16:41:48 2011] Fit fullrun_pn_xmm0112522601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Sep 24 17:14:17 2011] Source 20 is offset by 6.930222 and -5.139679 pixels which is larger than
2 X fitted extent = 2.250749 x 2.250749, not incorporating fit results
[Sat Sep 24 17:14:17 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 17:14:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 17:14:17 2011] Assessing source extent using major
[Sat Sep 24 17:14:17 2011] Source does appear to be extended
[Sat Sep 24 17:14:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 17:14:27 2011] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 17:14:27 2011] Initial guess for spatial extent in simple fitting = 7.80"
[Sat Sep 24 17:14:27 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.951
[Sat Sep 24 17:14:27 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 7.80"
[Sat Sep 24 17:47:56 2011] fullrun_pn_xmm0112522601_pi300-10000_cl_pass1_src19.ximg exists
[Sat Sep 24 17:47:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522601_pi300-10000_cl_pass1_src19.csv
[Sat Sep 24 17:47:56 2011] fullrun_pn_xmm0112522601_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Sep 24 17:47:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522601_pi300-10000_cl_pass1_src19.csv
[Sat Sep 24 17:47:56 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112522601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112522601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 17:47:57 2011] fullrun_pn_xmm0112522601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Sep 24 17:47:57 2011] fullrun_pn_xmm0112522601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Sep 24 17:47:57 2011] Fit fullrun_pn_xmm0112522601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Sep 24 18:18:10 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 18.109372 pixels away
[Sat Sep 24 18:18:10 2011] Source 20 is offset by 6.930222 and -5.113127 pixels which is larger than
2 X fitted extent = 2.403159 x 2.403159, not incorporating fit results
[Sat Sep 24 18:18:10 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:18:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:18:10 2011] Assessing source extent using major
[Sat Sep 24 18:18:10 2011] Source does appear to be extended
[Sat Sep 24 18:18:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 18:18:24 2011] XMMSAS src. selection expression = ellipse(23681.363312, 28335.265930, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 18:18:24 2011] Writing source region out to fullrun_pn_xmm0112522601_pi300-10000_pass1_cl_src20_src.reg
[Sat Sep 24 18:18:24 2011] Extracting stamp from image fullrun_pn_xmm0112522601_pi300-10000_cl_sm2.00.img.gz, (235, 289) - (310, 364)
[Sat Sep 24 18:18:24 2011] XMMSAS bgd. selection expression = annulus(23681.363312, 28335.265930, 1087.500000, 2175.000000, X, Y) && !ellipse(22982.402400, 28784.759000, 475.301614, 475.301614, 0.000000, X, Y) && !ellipse(24549.192800, 30400.313000, 426.618412, 426.618412, 0.000000, X, Y)
[Sat Sep 24 18:18:24 2011] Writing fullrun_pn_xmm0112522601_pi300-10000_pass1_cl_src20.gif
[Sat Sep 24 18:31:56 2011] Mean detx,y = (-4306.79, 24.67) 
[Sat Sep 24 18:31:57 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 18:32:19 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 18:32:19 2011] Setting source spectrum file to fullrun_pn_xmm0112522601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Sep 24 18:32:19 2011] Setting bgd. spectrum file to fullrun_pn_xmm0112522601_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Sep 24 18:46:18 2011] Not generating rmf since there are only 27 counts
[Sat Sep 24 18:46:18 2011] rmf not generated due to insufficient counts
[Sat Sep 24 19:10:24 2011] Updating aperture counts using extracted products
[Sat Sep 24 19:10:24 2011] Error reading totcts from fullrun_pn_xmm0112522601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Sep 24 19:10:24 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 19:10:24 2011] Using photon index=1.80, rate=0.00306, arf fullrun_pn_xmm0112522601_pi300-10000_pass1_cl_src20.arf
[Sat Sep 24 19:10:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 19:10:24 2011] Updating source flux to 1e-14
[Sat Sep 24 19:10:41 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting