[Mon Jun 3 00:45:28 2013] Detection parameters: Position = (344.7, 167.8) = 12 25 32.73 33 21 34.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 129.7 +/- 21.1 Background counts = 135.4 Rate = 0.03 +/- 0.005 [Mon Jun 3 00:45:30 2013] Off-axis axis estimate = 10.04' [Mon Jun 3 00:46:14 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:46:14 2013] Initial guess for spatial extent in simple fitting = 11.45" [Mon Jun 3 00:46:14 2013] source mask rpix=2.6, npix_max = 39, mask sum = 33, frac = 0.841 [Mon Jun 3 00:46:14 2013] Giving source the simple spatial ID 93 for pass 0, mean size = 11.45" [Mon Jun 3 00:46:19 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src93.ximg exists [Mon Jun 3 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src93.csv [Mon Jun 3 00:46:19 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src93_1.ximg exists [Mon Jun 3 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src93.csv [Mon Jun 3 00:46:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src93_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:46:25 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src93.ximg exists [Mon Jun 3 00:46:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src93.csv [Mon Jun 3 00:46:25 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists [Mon Jun 3 00:46:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src93.csv [Mon Jun 3 00:46:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src93_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:08 2013] Warning, spatial fit 93 centroid is now closest to src. 1 [Mon Jun 3 00:47:08 2013] Source 97 is offset by 0.333816 and 3.356341 pixels which is larger than 2 X fitted extent = 2.153104 x 2.153104, not incorporating fit results [Mon Jun 3 00:47:08 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:47:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:47:08 2013] Assessing source extent using major [Mon Jun 3 00:47:08 2013] Source does appear to be extended [Mon Jun 3 00:47:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:47:35 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:47:35 2013] Initial guess for spatial extent in simple fitting = 11.45" [Mon Jun 3 00:47:35 2013] source mask rpix=2.6, npix_max = 39, mask sum = 33, frac = 0.841 [Mon Jun 3 00:47:35 2013] Giving source the simple spatial ID 85 for pass 1, mean size = 11.45" [Mon Jun 3 00:47:38 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src85.ximg exists [Mon Jun 3 00:47:38 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src85_1.ximg exists [Mon Jun 3 00:47:38 2013] Fit fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src85 appears to have run properly [Mon Jun 3 00:47:44 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src85.ximg exists [Mon Jun 3 00:47:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src85.csv [Mon Jun 3 00:47:44 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists [Mon Jun 3 00:47:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src85.csv [Mon Jun 3 00:47:44 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src85_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:48:20 2013] Source 97 is offset by -2.504991 and 0.550249 pixels which is larger than 2 X fitted extent = 1.445623 x 1.445623, not incorporating fit results [Mon Jun 3 00:48:20 2013] Warning, spatial fit 85 centroid is now closest to src. 1 [Mon Jun 3 00:48:20 2013] Source 97 is offset by 8.112044 and 1.477398 pixels which is larger than 2 X fitted extent = 1.371623 x 1.371623, not incorporating fit results [Mon Jun 3 00:48:20 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:48:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:48:20 2013] Assessing source extent using major [Mon Jun 3 00:48:20 2013] Source does appear to be extended [Mon Jun 3 00:48:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:48:54 2013] XMMSAS src. selection expression = ellipse(29939.779785, 14554.199631, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jun 3 00:48:54 2013] Not overwriting source region fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src97_src.reg [Mon Jun 3 00:48:54 2013] Extracting stamp from image fullrun_pn_xmm0112522001_pi300-10000_cl_sm2.00.img.gz, (307, 130) - (382, 205) [Mon Jun 3 00:48:54 2013] XMMSAS bgd. selection expression = annulus(29939.779785, 14554.199631, 1087.500000, 2175.000000, X, Y) && !ellipse(30357.997345, 15163.481064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28917.784668, 17243.940781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28313.972595, 16905.914398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29639.217194, 15945.181427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29243.702789, 15234.159271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30614.393524, 14004.960358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29845.964325, 13789.499420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28824.080719, 13028.749893, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jun 3 00:48:54 2013] Writing fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src97.gif [Mon Jun 3 01:51:08 2013] Mean detx,y = (-2917.69, 13407.28) [Mon Jun 3 01:51:12 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 3 01:51:43 2013] Binned source spectrum to 10 counts/bin [Mon Jun 3 01:51:44 2013] Setting source spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src97_src_b10.pi.gz [Mon Jun 3 01:51:44 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src97_bgd.pi.gz [Mon Jun 3 02:57:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 3 02:57:59 2013] rmf not generated due to insufficient counts [Mon Jun 3 09:53:15 2013] Updating aperture counts using extracted products [Mon Jun 3 09:53:15 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src97_src_b10.pi.gz = 421.00 [Mon Jun 3 09:53:15 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src97_bgd.pi.gz = 841.00 [Mon Jun 3 09:53:15 2013] Got source and background scale factors 1264029.000000, 2203806.000000 [Mon Jun 3 09:53:15 2013] User source parameters: Position = (344.7, 167.8) = 12 25 32.73 33 21 34.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -61.4 +/- 21.5 Background aperture counts = 482.4 Rate = -0.06 +/- 0.02 [Mon Jun 3 09:53:15 2013] Updating counts from extracted products [Mon Jun 3 09:53:15 2013] Set source signif. to -61.37/21.96 = -2.79 [Mon Jun 3 09:53:25 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 3 09:53:25 2013] Using photon index=1.80, rate=-0.06, arf fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src97.arf [Mon Jun 3 09:53:25 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 3 09:53:25 2013] Updated flux is not positive, keeping original flux [Mon Jun 3 09:53:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 3 09:53:57 2013] xmm0112522001/analysis//spectral/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src97_pl.csv not found, spectral fit skipped or did not complete