[Mon Jun 3 00:45:28 2013] Detection parameters: Position = (341.2, 183.8) = 12 25 33.92 33 22 54.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 129.3 +/- 18.0 Background counts = 146.6 Rate = 0.03 +/- 0.005 [Mon Jun 3 00:45:30 2013] Off-axis axis estimate = 8.87' [Mon Jun 3 00:46:14 2013] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:46:14 2013] Initial guess for spatial extent in simple fitting = 10.86" [Mon Jun 3 00:46:14 2013] source mask rpix=2.5, npix_max = 35, mask sum = 32, frac = 0.891 [Mon Jun 3 00:46:14 2013] Giving source the simple spatial ID 91 for pass 0, mean size = 10.86" [Mon Jun 3 00:46:19 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src91.ximg exists [Mon Jun 3 00:46:19 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src91_1.ximg exists [Mon Jun 3 00:46:19 2013] Fit fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src91 appears to have run properly [Mon Jun 3 00:46:25 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src91.ximg exists [Mon Jun 3 00:46:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src91.csv [Mon Jun 3 00:46:25 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists [Mon Jun 3 00:46:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src91.csv [Mon Jun 3 00:46:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src91_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:08 2013] Source 95 is offset by 5.810864 and -1.737317 pixels which is larger than 2 X fitted extent = 1.178409 x 1.178409, not incorporating fit results [Mon Jun 3 00:47:08 2013] Warning, spatial fit 91 centroid is now closest to src. 1 [Mon Jun 3 00:47:08 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:47:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:47:08 2013] Assessing source extent using major [Mon Jun 3 00:47:08 2013] Source does appear to be extended [Mon Jun 3 00:47:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:47:35 2013] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:47:35 2013] Initial guess for spatial extent in simple fitting = 10.86" [Mon Jun 3 00:47:35 2013] source mask rpix=2.5, npix_max = 35, mask sum = 32, frac = 0.891 [Mon Jun 3 00:47:35 2013] Giving source the simple spatial ID 83 for pass 1, mean size = 10.86" [Mon Jun 3 00:47:38 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src83.ximg exists [Mon Jun 3 00:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src83.csv [Mon Jun 3 00:47:38 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src83_1.ximg exists [Mon Jun 3 00:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src83.csv [Mon Jun 3 00:47:38 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src83_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:43 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src83.ximg exists [Mon Jun 3 00:47:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src83.csv [Mon Jun 3 00:47:44 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists [Mon Jun 3 00:47:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src83.csv [Mon Jun 3 00:47:44 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src83_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:48:20 2013] Source 95 is offset by 6.451616 and -5.707087 pixels which is larger than 2 X fitted extent = 1.185439 x 1.185439, not incorporating fit results [Mon Jun 3 00:48:20 2013] Warning, spatial fit 83 centroid is now closest to src. 1 [Mon Jun 3 00:48:20 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:48:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:48:20 2013] Assessing source extent using major [Mon Jun 3 00:48:20 2013] Source does appear to be extended [Mon Jun 3 00:48:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:48:54 2013] XMMSAS src. selection expression = ellipse(29639.217194, 15945.181427, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jun 3 00:48:54 2013] Not overwriting source region fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src95_src.reg [Mon Jun 3 00:48:54 2013] Extracting stamp from image fullrun_pn_xmm0112522001_pi300-10000_cl_sm2.00.img.gz, (304, 146) - (379, 221) [Mon Jun 3 00:48:54 2013] XMMSAS bgd. selection expression = annulus(29639.217194, 15945.181427, 1087.500000, 2175.000000, X, Y) && !ellipse(30357.997345, 15163.481064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26952.348785, 18511.686737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.386139, 18817.471771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.938599, 18125.349442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28917.784668, 17243.940781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28313.972595, 16905.914398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29243.702789, 15234.159271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29939.779785, 14554.199631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30614.393524, 14004.960358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29845.964325, 13789.499420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28824.080719, 13028.749893, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jun 3 00:48:54 2013] Writing fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src95.gif [Mon Jun 3 01:49:38 2013] Mean detx,y = (-2638.80, 11993.60) [Mon Jun 3 01:49:42 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 3 01:50:12 2013] Binned source spectrum to 10 counts/bin [Mon Jun 3 01:50:13 2013] Setting source spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src95_src_b10.pi.gz [Mon Jun 3 01:50:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src95_bgd.pi.gz [Mon Jun 3 02:57:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 3 02:57:26 2013] rmf not generated due to insufficient counts [Mon Jun 3 09:53:14 2013] Updating aperture counts using extracted products [Mon Jun 3 09:53:14 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src95_src_b10.pi.gz = 332.00 [Mon Jun 3 09:53:14 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src95_bgd.pi.gz = 1171.00 [Mon Jun 3 09:53:14 2013] Got source and background scale factors 994859.000000, 5097061.000000 [Mon Jun 3 09:53:14 2013] User source parameters: Position = (341.2, 183.8) = 12 25 33.92 33 22 54.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 103.4 +/- 19.2 Background aperture counts = 228.6 Rate = 0.1 +/- 0.02 [Mon Jun 3 09:53:14 2013] Updating counts from extracted products [Mon Jun 3 09:53:14 2013] Set source signif. to 103.44/15.12 = 6.84 [Mon Jun 3 09:53:25 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 3 09:53:25 2013] Using photon index=1.80, rate=0.101, arf fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src95.arf [Mon Jun 3 09:53:25 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 3 09:53:25 2013] Updating source flux to 1.3e-12 [Mon Jun 3 09:53:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 3 09:53:57 2013] xmm0112522001/analysis//spectral/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src95_pl.csv not found, spectral fit skipped or did not complete