[Mon Jun 3 00:45:27 2013] Detection parameters: Position = (126.1, 219.2) = 12 26 48.66 33 25 14.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 122.0 +/- 24.7 Background counts = 144.9 Rate = 0.03 +/- 0.006 [Mon Jun 3 00:45:30 2013] Off-axis axis estimate = 13.75' [Mon Jun 3 00:46:14 2013] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:46:14 2013] Initial guess for spatial extent in simple fitting = 13.30" [Mon Jun 3 00:46:14 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.967 [Mon Jun 3 00:46:14 2013] Giving source the simple spatial ID 85 for pass 0, mean size = 13.30" [Mon Jun 3 00:46:19 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src85.ximg exists [Mon Jun 3 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src85.csv [Mon Jun 3 00:46:19 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src85_1.ximg exists [Mon Jun 3 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src85.csv [Mon Jun 3 00:46:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src85_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:46:24 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src85.ximg exists [Mon Jun 3 00:46:24 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists [Mon Jun 3 00:46:24 2013] Fit fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly [Mon Jun 3 00:47:07 2013] Source 88 is offset by -5.748961 and 8.054612 pixels which is larger than 2 X fitted extent = 1.545577 x 1.545577, not incorporating fit results [Mon Jun 3 00:47:08 2013] Warning, spatial fit 85 centroid is now closest to src. 7 [Mon Jun 3 00:47:08 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:47:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:47:08 2013] Assessing source extent using major [Mon Jun 3 00:47:08 2013] Source does appear to be extended [Mon Jun 3 00:47:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:47:08 2013] Source is confused with source 2 [Mon Jun 3 00:47:35 2013] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:47:35 2013] Initial guess for spatial extent in simple fitting = 13.30" [Mon Jun 3 00:47:35 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.967 [Mon Jun 3 00:47:35 2013] Giving source the simple spatial ID 77 for pass 1, mean size = 13.30" [Mon Jun 3 00:47:38 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src77.ximg exists [Mon Jun 3 00:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src77.csv [Mon Jun 3 00:47:38 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src77_1.ximg exists [Mon Jun 3 00:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src77.csv [Mon Jun 3 00:47:38 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src77_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:41 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src77.ximg exists [Mon Jun 3 00:47:41 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists [Mon Jun 3 00:47:41 2013] Fit fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly [Mon Jun 3 00:48:20 2013] Source 88 is offset by 0.254281 and 3.052612 pixels which is larger than 2 X fitted extent = 1.419779 x 1.419779, not incorporating fit results [Mon Jun 3 00:48:20 2013] Warning: source 77 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 88 at 13.543955 pixels away [Mon Jun 3 00:48:20 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:48:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:48:20 2013] Assessing source extent using major [Mon Jun 3 00:48:20 2013] Source does appear to be extended [Mon Jun 3 00:48:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:48:53 2013] XMMSAS src. selection expression = ellipse(10923.288429, 19021.411209, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jun 3 00:48:53 2013] Not overwriting source region fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src88_src.reg [Mon Jun 3 00:48:53 2013] Extracting stamp from image fullrun_pn_xmm0112522001_pi300-10000_cl_sm2.00.img.gz, (89, 182) - (164, 257) [Mon Jun 3 00:48:53 2013] XMMSAS bgd. selection expression = annulus(10923.288429, 19021.411209, 1087.500000, 2175.000000, X, Y) && !ellipse(10776.730000, 20244.865000, 2084.584060, 791.208023, 151.451000, X, Y) && !ellipse(11213.316000, 20092.230000, 2031.488058, 2031.488058, 0.000000, X, Y) && !ellipse(9946.159325, 19716.477966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12474.166000, 21145.534000, 2031.488058, 1014.976029, 131.509000, X, Y) && !ellipse(10403.961380, 19351.813675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13849.735397, 21876.755829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13156.379807, 21011.487091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13266.345810, 21728.970261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12785.908966, 21478.747025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12198.502319, 21002.770630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13721.246582, 21026.276932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12058.992000, 20616.740000, 1976.328057, 577.024817, 307.983000, X, Y) && !ellipse(13809.489136, 20414.568802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14328.718000, 20196.478000, 1915.048055, 1915.048055, 0.000000, X, Y) && !ellipse(11604.296143, 19874.360611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10443.807396, 18749.155212, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jun 3 00:48:53 2013] Writing fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src88.gif [Mon Jun 3 01:43:48 2013] Mean detx,y = (-17549.73, 457.65) [Mon Jun 3 01:43:51 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 3 01:44:26 2013] Binned source spectrum to 10 counts/bin [Mon Jun 3 01:44:27 2013] Setting source spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src88_src_b10.pi.gz [Mon Jun 3 01:44:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src88_bgd.pi.gz [Mon Jun 3 02:55:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 3 02:55:16 2013] rmf not generated due to insufficient counts [Mon Jun 3 09:53:11 2013] Updating aperture counts using extracted products [Mon Jun 3 09:53:11 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src88_src_b10.pi.gz = 445.00 [Mon Jun 3 09:53:11 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src88_bgd.pi.gz = 706.00 [Mon Jun 3 09:53:11 2013] Got source and background scale factors 1340800.000000, 2205174.000000 [Mon Jun 3 09:53:11 2013] User source parameters: Position = (126.1, 219.2) = 12 26 48.66 33 25 14.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 15.7 +/- 22.1 Background aperture counts = 429.3 Rate = 0.02 +/- 0.02 [Mon Jun 3 09:53:11 2013] Updating counts from extracted products [Mon Jun 3 09:53:11 2013] Set source signif. to 15.73/20.72 = 0.76 [Mon Jun 3 09:53:25 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 3 09:53:25 2013] Using photon index=1.80, rate=0.0154, arf fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src88.arf [Mon Jun 3 09:53:25 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 3 09:53:25 2013] Updating source flux to 1.4e-13 [Mon Jun 3 09:53:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 3 09:53:57 2013] xmm0112522001/analysis//spectral/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src88_pl.csv not found, spectral fit skipped or did not complete