[Mon Jun 3 00:45:24 2013] Detection parameters: Position = (147.5, 247.4) = 12 26 41.25 33 27 28.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 104.7 +/- 20.5 Background counts = 111.9 Rate = 0.03 +/- 0.005 [Mon Jun 3 00:45:30 2013] Off-axis axis estimate = 11.55' [Mon Jun 3 00:46:14 2013] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:46:14 2013] Initial guess for spatial extent in simple fitting = 12.20" [Mon Jun 3 00:46:14 2013] source mask rpix=2.8, npix_max = 43, mask sum = 40, frac = 0.915 [Mon Jun 3 00:46:14 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 12.20" [Mon Jun 3 00:46:18 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src59.ximg exists [Mon Jun 3 00:46:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src59.csv [Mon Jun 3 00:46:18 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src59_1.ximg exists [Mon Jun 3 00:46:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src59.csv [Mon Jun 3 00:46:18 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src59_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:46:21 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src59.ximg exists [Mon Jun 3 00:46:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src59.csv [Mon Jun 3 00:46:21 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists [Mon Jun 3 00:46:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src59.csv [Mon Jun 3 00:46:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src59_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:07 2013] Source 62 is offset by -0.907819 and -1.215374 pixels which is larger than 2 X fitted extent = 0.840269 x 0.840239, not incorporating fit results [Mon Jun 3 00:47:08 2013] Warning, spatial fit 59 centroid is now closest to src. 12 [Mon Jun 3 00:47:08 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:47:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:47:08 2013] Assessing source extent using major [Mon Jun 3 00:47:08 2013] Source does appear to be extended [Mon Jun 3 00:47:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:47:08 2013] Source is confused with source 8 [Mon Jun 3 00:47:35 2013] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:47:35 2013] Initial guess for spatial extent in simple fitting = 12.20" [Mon Jun 3 00:47:35 2013] source mask rpix=2.8, npix_max = 43, mask sum = 40, frac = 0.915 [Mon Jun 3 00:47:35 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 12.20" [Mon Jun 3 00:47:37 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src54.ximg exists [Mon Jun 3 00:47:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src54.csv [Mon Jun 3 00:47:37 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src54_1.ximg exists [Mon Jun 3 00:47:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src54.csv [Mon Jun 3 00:47:37 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:41 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src54.ximg exists [Mon Jun 3 00:47:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src54.csv [Mon Jun 3 00:47:41 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists [Mon Jun 3 00:47:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src54.csv [Mon Jun 3 00:47:41 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:48:20 2013] Source 62 is offset by 7.170471 and -6.208908 pixels which is larger than 2 X fitted extent = 1.393568 x 1.393568, not incorporating fit results [Mon Jun 3 00:48:20 2013] Warning, spatial fit 54 centroid is now closest to src. 79 [Mon Jun 3 00:48:20 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:48:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:48:20 2013] Assessing source extent using major [Mon Jun 3 00:48:20 2013] Source does appear to be extended [Mon Jun 3 00:48:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:48:51 2013] XMMSAS src. selection expression = ellipse(12785.908966, 21478.747025, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jun 3 00:48:51 2013] Not overwriting source region fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src62_src.reg [Mon Jun 3 00:48:51 2013] Extracting stamp from image fullrun_pn_xmm0112522001_pi300-10000_cl_sm2.00.img.gz, (110, 210) - (185, 285) [Mon Jun 3 00:48:51 2013] XMMSAS bgd. selection expression = annulus(12785.908966, 21478.747025, 1087.500000, 2175.000000, X, Y) && !ellipse(10776.730000, 20244.865000, 2084.584060, 791.208023, 151.451000, X, Y) && !ellipse(14739.933533, 22317.395111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11213.316000, 20092.230000, 2031.488058, 2031.488058, 0.000000, X, Y) && !ellipse(9946.159325, 19716.477966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12474.166000, 21145.534000, 2031.488058, 1014.976029, 131.509000, X, Y) && !ellipse(10403.961380, 19351.813675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13849.735397, 21876.755829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13156.379807, 21011.487091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15427.765335, 22798.990875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13266.345810, 21728.970261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14982.668259, 21801.934448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14422.599121, 21420.252747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12198.502319, 21002.770630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14457.203445, 20923.429062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15532.117279, 21106.493332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13721.246582, 21026.276932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12058.992000, 20616.740000, 1976.328057, 577.024817, 307.983000, X, Y) && !ellipse(13809.489136, 20414.568802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14328.718000, 20196.478000, 1915.048055, 1915.048055, 0.000000, X, Y) && !ellipse(11604.296143, 19874.360611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10923.288429, 19021.411209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10443.807396, 18749.155212, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jun 3 00:48:51 2013] Writing fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src62.gif [Mon Jun 3 01:26:58 2013] Mean detx,y = (-14740.71, -654.84) [Mon Jun 3 01:27:03 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 3 01:27:36 2013] Binned source spectrum to 10 counts/bin [Mon Jun 3 01:27:37 2013] Setting source spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src62_src_b10.pi.gz [Mon Jun 3 01:27:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src62_bgd.pi.gz [Mon Jun 3 02:46:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 3 02:46:22 2013] rmf not generated due to insufficient counts [Mon Jun 3 09:53:03 2013] Updating aperture counts using extracted products [Mon Jun 3 09:53:03 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 319.00 [Mon Jun 3 09:53:03 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src62_bgd.pi.gz = 253.00 [Mon Jun 3 09:53:03 2013] Got source and background scale factors 1061434.000000, 2343339.000000 [Mon Jun 3 09:53:03 2013] User source parameters: Position = (147.5, 247.4) = 12 26 41.25 33 27 28.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 204.4 +/- 18.9 Background aperture counts = 114.6 Rate = 0.2 +/- 0.02 [Mon Jun 3 09:53:03 2013] Updating counts from extracted products [Mon Jun 3 09:53:03 2013] Set source signif. to 204.40/10.71 = 19.09 [Mon Jun 3 09:53:23 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 3 09:53:23 2013] Using photon index=1.80, rate=0.2, arf fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src62.arf [Mon Jun 3 09:53:23 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 3 09:53:23 2013] Updating source flux to 1.7e-12 [Mon Jun 3 09:53:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 3 09:53:57 2013] xmm0112522001/analysis//spectral/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete