[Mon Jun 3 00:45:14 2013] Detection parameters: Position = (170.0, 257.1) = 12 26 33.44 33 28 1.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 253.0 +/- 24.0 Background counts = 103.8 Rate = 0.07 +/- 0.006 [Mon Jun 3 00:45:30 2013] Off-axis axis estimate = 9.78' [Mon Jun 3 00:46:14 2013] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:46:14 2013] Initial guess for spatial extent in simple fitting = 11.32" [Mon Jun 3 00:46:14 2013] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.779 [Mon Jun 3 00:46:14 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.32" [Mon Jun 3 00:46:15 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src3.ximg exists [Mon Jun 3 00:46:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src3.csv [Mon Jun 3 00:46:15 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src3_1.ximg exists [Mon Jun 3 00:46:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src3.csv [Mon Jun 3 00:46:15 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:46:19 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Mon Jun 3 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src3.csv [Mon Jun 3 00:46:19 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Mon Jun 3 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src3.csv [Mon Jun 3 00:46:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:07 2013] Warning, spatial fit 3 centroid is now closest to src. 65 [Mon Jun 3 00:47:08 2013] Source 5 is offset by 8.368845 and -5.307596 pixels which is larger than 2 X fitted extent = 1.298354 x 1.298354, not incorporating fit results [Mon Jun 3 00:47:08 2013] Source 5 is offset by -3.907109 and 0.965898 pixels which is larger than 2 X fitted extent = 1.492064 x 1.492064, not incorporating fit results [Mon Jun 3 00:47:08 2013] Source 5 is offset by 1.036983 and 3.134243 pixels which is larger than 2 X fitted extent = 1.368124 x 1.368124, not incorporating fit results [Mon Jun 3 00:47:08 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:47:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:47:08 2013] Assessing source extent using major [Mon Jun 3 00:47:08 2013] Source does appear to be extended [Mon Jun 3 00:47:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:47:08 2013] Source is confused with source 61 [Mon Jun 3 00:47:35 2013] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:47:35 2013] Initial guess for spatial extent in simple fitting = 11.32" [Mon Jun 3 00:47:35 2013] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.779 [Mon Jun 3 00:47:35 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.32" [Mon Jun 3 00:47:36 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src3.ximg exists [Mon Jun 3 00:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src3.csv [Mon Jun 3 00:47:36 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src3_1.ximg exists [Mon Jun 3 00:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src3.csv [Mon Jun 3 00:47:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:39 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Mon Jun 3 00:47:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src3.csv [Mon Jun 3 00:47:39 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Mon Jun 3 00:47:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src3.csv [Mon Jun 3 00:47:39 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:48:20 2013] Warning, spatial fit 3 centroid is now closest to src. 12 [Mon Jun 3 00:48:20 2013] Source 5 is offset by -1.107385 and -1.861321 pixels which is larger than 2 X fitted extent = 1.266092 x 1.266092, not incorporating fit results [Mon Jun 3 00:48:20 2013] Source 5 is offset by 1.036983 and 3.134243 pixels which is larger than 2 X fitted extent = 1.368124 x 1.368124, not incorporating fit results [Mon Jun 3 00:48:20 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:48:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:48:20 2013] Assessing source extent using major [Mon Jun 3 00:48:20 2013] Source does appear to be extended [Mon Jun 3 00:48:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:48:46 2013] XMMSAS src. selection expression = ellipse(14739.933533, 22317.395111, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jun 3 00:48:46 2013] Not overwriting source region fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_src.reg [Mon Jun 3 00:48:46 2013] Extracting stamp from image fullrun_pn_xmm0112522001_pi300-10000_cl_sm2.00.img.gz, (132, 220) - (207, 295) [Mon Jun 3 00:48:46 2013] XMMSAS bgd. selection expression = annulus(14739.933533, 22317.395111, 1087.500000, 2175.000000, X, Y) && !ellipse(10776.730000, 20244.865000, 2084.584060, 791.208023, 151.451000, X, Y) && !ellipse(11213.316000, 20092.230000, 2031.488058, 2031.488058, 0.000000, X, Y) && !ellipse(12474.166000, 21145.534000, 2031.488058, 1014.976029, 131.509000, X, Y) && !ellipse(13849.735397, 21876.755829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13156.379807, 21011.487091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18238.380000, 24103.338000, 1577.832045, 1577.832045, 0.000000, X, Y) && !ellipse(17273.963852, 23763.724976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16742.290253, 23426.663696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15427.765335, 22798.990875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16808.359329, 22917.418457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16415.749527, 22489.576416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18255.488000, 22305.976000, 1681.464048, 1681.464048, 133.050000, X, Y) && !ellipse(17720.004000, 22504.216000, 1115.104032, 1115.104032, 0.000000, X, Y) && !ellipse(16205.606613, 21956.260681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13266.345810, 21728.970261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16709.633392, 21615.850082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14982.668259, 21801.934448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12785.908966, 21478.747025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14422.599121, 21420.252747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15957.163574, 21270.284744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12198.502319, 21002.770630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14457.203445, 20923.429062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15532.117279, 21106.493332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13721.246582, 21026.276932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17320.262253, 20412.770020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16120.661606, 20478.941315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12058.992000, 20616.740000, 1976.328057, 577.024817, 307.983000, X, Y) && !ellipse(13809.489136, 20414.568802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17342.957443, 20054.542847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14328.718000, 20196.478000, 1915.048055, 1915.048055, 0.000000, X, Y) && !ellipse(17127.045151, 19547.347290, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jun 3 00:48:46 2013] Writing fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5.gif [Mon Jun 3 00:48:58 2013] ../../xmm0112522001/products/events/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0112522001/products/events/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create [Mon Jun 3 00:48:58 2013] Mean detx,y = (-12545.48, -535.03) [Mon Jun 3 00:48:58 2013] ../../xmm0112522001/products/images/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_src.img and ../../xmm0112522001/products/images/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create [Mon Jun 3 00:48:58 2013] ../../xmm0112522001/products/spectra/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0112522001/products/spectra/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create [Mon Jun 3 00:48:58 2013] Setting source spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Mon Jun 3 00:48:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_bgd.pi.gz [Mon Jun 3 00:48:58 2013] ../../xmm0112522001/products/lightcurves/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0112522001/products/lightcurves/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create [Mon Jun 3 02:06:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 3 02:06:04 2013] rmf not generated due to insufficient counts [Mon Jun 3 09:52:43 2013] Updating aperture counts using extracted products [Mon Jun 3 09:52:43 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 323.00 [Mon Jun 3 09:52:43 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_bgd.pi.gz = 379.00 [Mon Jun 3 09:52:43 2013] Got source and background scale factors 965566.000000, 3183603.000000 [Mon Jun 3 09:52:43 2013] User source parameters: Position = (170.0, 257.1) = 12 26 33.44 33 28 1.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 208.1 +/- 19.0 Background aperture counts = 114.9 Rate = 0.2 +/- 0.02 [Mon Jun 3 09:52:43 2013] Updating counts from extracted products [Mon Jun 3 09:52:43 2013] Set source signif. to 208.05/10.72 = 19.41 [Mon Jun 3 09:53:20 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 3 09:53:20 2013] Using photon index=1.80, rate=0.204, arf fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5.arf [Mon Jun 3 09:53:20 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 3 09:53:20 2013] Updating source flux to 1.4e-12 [Mon Jun 3 09:53:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 3 09:53:57 2013] xmm0112522001/analysis//spectral/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete