[Mon Jun 3 00:45:20 2013] Detection parameters: Position = (206.9, 274.1) = 12 26 20.61 33 29 17.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 262.0 +/- 26.0 Background counts = 114.7 Rate = 0.07 +/- 0.007 [Mon Jun 3 00:45:30 2013] Off-axis axis estimate = 6.87' [Mon Jun 3 00:46:14 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:46:14 2013] Initial guess for spatial extent in simple fitting = 9.86" [Mon Jun 3 00:46:14 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.176 [Mon Jun 3 00:46:14 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 9.86" [Mon Jun 3 00:46:17 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src35.ximg exists [Mon Jun 3 00:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src35.csv [Mon Jun 3 00:46:17 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src35_1.ximg exists [Mon Jun 3 00:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src35.csv [Mon Jun 3 00:46:17 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:46:20 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src35.ximg exists [Mon Jun 3 00:46:20 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists [Mon Jun 3 00:46:20 2013] Fit fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly [Mon Jun 3 00:47:07 2013] Spatial fit model total counts = 727.688000, observed total counts = 633.000000 [Mon Jun 3 00:47:07 2013] Poor agreement between spatial fit and data for source 38 It may help to tweak spatial fit manually Not incorporating fit results [Mon Jun 3 00:47:08 2013] Warning, spatial fit 35 centroid is now closest to src. 34 [Mon Jun 3 00:47:08 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:47:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:47:08 2013] Assessing source extent using major [Mon Jun 3 00:47:08 2013] Source does appear to be extended [Mon Jun 3 00:47:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:47:08 2013] Source is confused with source 34 [Mon Jun 3 00:47:35 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:47:35 2013] Initial guess for spatial extent in simple fitting = 9.86" [Mon Jun 3 00:47:35 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.176 [Mon Jun 3 00:47:35 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 9.86" [Mon Jun 3 00:47:37 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src33.ximg exists [Mon Jun 3 00:47:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src33.csv [Mon Jun 3 00:47:37 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src33_1.ximg exists [Mon Jun 3 00:47:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src33.csv [Mon Jun 3 00:47:37 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src33_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:40 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src33.ximg exists [Mon Jun 3 00:47:40 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists [Mon Jun 3 00:47:40 2013] Fit fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly [Mon Jun 3 00:48:20 2013] Warning, spatial fit 33 centroid is now closest to src. 34 [Mon Jun 3 00:48:20 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:48:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:48:20 2013] Assessing source extent using major [Mon Jun 3 00:48:20 2013] Source does appear to be extended [Mon Jun 3 00:48:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:48:49 2013] XMMSAS src. selection expression = ellipse(17954.106689, 23795.264069, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jun 3 00:48:49 2013] Not overwriting source region fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src38_src.reg [Mon Jun 3 00:48:49 2013] Extracting stamp from image fullrun_pn_xmm0112522001_pi300-10000_cl_sm2.00.img.gz, (169, 237) - (244, 312) [Mon Jun 3 00:48:49 2013] XMMSAS bgd. selection expression = annulus(17954.106689, 23795.264069, 1087.500000, 2175.000000, X, Y) && !ellipse(20194.446960, 23174.101379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20498.388000, 25321.720000, 1281.568037, 1281.568037, 13.997000, X, Y) && !ellipse(20108.516000, 24990.632000, 1400.360040, 1400.360040, 0.000000, X, Y) && !ellipse(20464.698410, 24404.635773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19583.603043, 24508.843018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18238.380000, 24103.338000, 1577.832045, 1577.832045, 0.000000, X, Y) && !ellipse(18820.422836, 24140.577179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17273.963852, 23763.724976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20160.240891, 23730.372498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16742.290253, 23426.663696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18153.738342, 23364.275818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19689.040894, 23090.823730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18514.165207, 23014.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18071.144363, 23006.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15427.765335, 22798.990875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16808.359329, 22917.418457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16415.749527, 22489.576416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18255.488000, 22305.976000, 1681.464048, 1681.464048, 133.050000, X, Y) && !ellipse(18960.523422, 22228.902985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17720.004000, 22504.216000, 1115.104032, 1115.104032, 0.000000, X, Y) && !ellipse(16205.606613, 21956.260681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19427.494200, 21433.662000, 1582.336046, 1582.336046, 0.000000, X, Y) && !ellipse(16709.633392, 21615.850082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14982.668259, 21801.934448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15957.163574, 21270.284744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15532.117279, 21106.493332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14328.718000, 20196.478000, 1915.048055, 1915.048055, 0.000000, X, Y) [Mon Jun 3 00:48:49 2013] Writing fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src38.gif [Mon Jun 3 01:11:59 2013] Mean detx,y = (-9069.16, -399.43) [Mon Jun 3 01:12:03 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 3 01:12:29 2013] Binned source spectrum to 10 counts/bin [Mon Jun 3 01:12:30 2013] Setting source spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src38_src_b10.pi.gz [Mon Jun 3 01:12:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src38_bgd.pi.gz [Mon Jun 3 02:34:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 3 02:34:13 2013] rmf not generated due to insufficient counts [Mon Jun 3 09:52:56 2013] Updating aperture counts using extracted products [Mon Jun 3 09:52:56 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 565.00 [Mon Jun 3 09:52:56 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src38_bgd.pi.gz = 199.00 [Mon Jun 3 09:52:56 2013] Got source and background scale factors 1294936.000000, 1592252.000000 [Mon Jun 3 09:52:56 2013] User source parameters: Position = (206.9, 274.1) = 12 26 20.61 33 29 17.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 403.2 +/- 24.8 Background aperture counts = 161.8 Rate = 0.4 +/- 0.02 [Mon Jun 3 09:52:56 2013] Updating counts from extracted products [Mon Jun 3 09:52:56 2013] Set source signif. to 403.16/12.72 = 31.69 [Mon Jun 3 09:53:22 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 3 09:53:22 2013] Using photon index=1.80, rate=0.394, arf fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src38.arf [Mon Jun 3 09:53:22 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 3 09:53:22 2013] Updating source flux to 1.9e-12 [Mon Jun 3 09:53:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 3 09:53:57 2013] xmm0112522001/analysis//spectral/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete