[Mon Jun 3 00:45:19 2013] Detection parameters: Position = (232.3, 273.3) = 12 26 11.79 33 29 15.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 141.2 +/- 22.9 Background counts = 177.8 Rate = 0.07 +/- 0.01 [Mon Jun 3 00:45:30 2013] Off-axis axis estimate = 5.13' [Mon Jun 3 00:46:14 2013] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:46:14 2013] Initial guess for spatial extent in simple fitting = 8.99" [Mon Jun 3 00:46:14 2013] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.910 [Mon Jun 3 00:46:14 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 8.99" [Mon Jun 3 00:46:17 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src34.ximg exists [Mon Jun 3 00:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src34.csv [Mon Jun 3 00:46:17 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src34_1.ximg exists [Mon Jun 3 00:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src34.csv [Mon Jun 3 00:46:17 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src34_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:46:20 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src34.ximg exists [Mon Jun 3 00:46:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src34.csv [Mon Jun 3 00:46:20 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists [Mon Jun 3 00:46:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src34.csv [Mon Jun 3 00:46:20 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src34_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:07 2013] Source 37 is offset by 0.080746 and -1.057443 pixels which is larger than 2 X fitted extent = 1.055062 x 1.055062, not incorporating fit results [Mon Jun 3 00:47:07 2013] Source 37 is offset by -1.011208 and -1.288109 pixels which is larger than 2 X fitted extent = 2.461274 x 1.049563, not incorporating fit results [Mon Jun 3 00:47:08 2013] Warning, spatial fit 34 centroid is now closest to src. 32 [Mon Jun 3 00:47:08 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:47:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:47:08 2013] Assessing source extent using major [Mon Jun 3 00:47:08 2013] Source does appear to be extended [Mon Jun 3 00:47:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:47:08 2013] Source is confused with source 4 [Mon Jun 3 00:47:35 2013] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:47:35 2013] Initial guess for spatial extent in simple fitting = 8.99" [Mon Jun 3 00:47:35 2013] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.910 [Mon Jun 3 00:47:35 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.99" [Mon Jun 3 00:47:37 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src32.ximg exists [Mon Jun 3 00:47:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src32.csv [Mon Jun 3 00:47:37 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src32_1.ximg exists [Mon Jun 3 00:47:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src32.csv [Mon Jun 3 00:47:37 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:40 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src32.ximg exists [Mon Jun 3 00:47:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src32.csv [Mon Jun 3 00:47:40 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists [Mon Jun 3 00:47:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src32.csv [Mon Jun 3 00:47:40 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:48:20 2013] Warning, spatial fit 32 centroid is now closest to src. 41 [Mon Jun 3 00:48:20 2013] Source 37 is offset by -0.221714 and -2.309466 pixels which is larger than 2 X fitted extent = 1.133499 x 1.597522, not incorporating fit results [Mon Jun 3 00:48:20 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:48:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:48:20 2013] Assessing source extent using major [Mon Jun 3 00:48:20 2013] Source does appear to be extended [Mon Jun 3 00:48:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:48:48 2013] XMMSAS src. selection expression = ellipse(20160.240891, 23730.372498, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jun 3 00:48:48 2013] Not overwriting source region fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src37_src.reg [Mon Jun 3 00:48:48 2013] Extracting stamp from image fullrun_pn_xmm0112522001_pi300-10000_cl_sm2.00.img.gz, (195, 236) - (270, 311) [Mon Jun 3 00:48:48 2013] XMMSAS bgd. selection expression = annulus(20160.240891, 23730.372498, 1087.500000, 2175.000000, X, Y) && !ellipse(20194.446960, 23174.101379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22750.459595, 26521.894196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22132.784286, 26219.778412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20498.388000, 25321.720000, 1281.568037, 1281.568037, 13.997000, X, Y) && !ellipse(22503.164856, 25684.949310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21861.054200, 26022.819400, 1294.952037, 1294.952037, 0.000000, X, Y) && !ellipse(22944.167877, 25172.698578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20108.516000, 24990.632000, 1400.360040, 1400.360040, 0.000000, X, Y) && !ellipse(21681.900000, 24592.114000, 1299.704037, 1299.704037, 0.000000, X, Y) && !ellipse(21910.942000, 24614.434000, 1299.704037, 1299.704037, 0.000000, X, Y) && !ellipse(21083.110489, 24320.112915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20464.698410, 24404.635773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19583.603043, 24508.843018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18238.380000, 24103.338000, 1577.832045, 1577.832045, 0.000000, X, Y) && !ellipse(18820.422836, 24140.577179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17273.963852, 23763.724976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17954.106689, 23795.264069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18153.738342, 23364.275818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19689.040894, 23090.823730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18514.165207, 23014.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18071.144363, 23006.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18255.488000, 22305.976000, 1681.464048, 1681.464048, 133.050000, X, Y) && !ellipse(18960.523422, 22228.902985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17720.004000, 22504.216000, 1115.104032, 1115.104032, 0.000000, X, Y) && !ellipse(19427.494200, 21433.662000, 1582.336046, 1582.336046, 0.000000, X, Y) [Mon Jun 3 00:48:48 2013] Writing fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src37.gif [Mon Jun 3 01:11:23 2013] Mean detx,y = (-7088.91, 681.89) [Mon Jun 3 01:11:27 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 3 01:11:53 2013] Binned source spectrum to 10 counts/bin [Mon Jun 3 01:11:53 2013] Setting source spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src37_src_b10.pi.gz [Mon Jun 3 01:11:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src37_bgd.pi.gz [Mon Jun 3 02:33:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 3 02:33:53 2013] rmf not generated due to insufficient counts [Mon Jun 3 09:52:55 2013] Updating aperture counts using extracted products [Mon Jun 3 09:52:56 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 436.00 [Mon Jun 3 09:52:56 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src37_bgd.pi.gz = 656.00 [Mon Jun 3 09:52:56 2013] Got source and background scale factors 1173260.000000, 1516800.000000 [Mon Jun 3 09:52:56 2013] User source parameters: Position = (232.3, 273.3) = 12 26 11.79 33 29 15.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -71.4 +/- 21.9 Background aperture counts = 507.4 Rate = -0.07 +/- 0.02 [Mon Jun 3 09:52:56 2013] Updating counts from extracted products [Mon Jun 3 09:52:56 2013] Set source signif. to -71.42/22.53 = -3.17 [Mon Jun 3 09:53:22 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 3 09:53:22 2013] Using photon index=1.80, rate=-0.0699, arf fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src37.arf [Mon Jun 3 09:53:22 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 3 09:53:22 2013] Updated flux is not positive, keeping original flux [Mon Jun 3 09:53:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 3 09:53:57 2013] xmm0112522001/analysis//spectral/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete