[Mon Jun  3 00:45:19 2013] Detection parameters:
  Position = (216.9, 278.0) = 12 26 17.15 33 29 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.1 +/- 24.6
  Background counts = 126.6
  Rate = 0.1 +/- 0.01

[Mon Jun  3 00:45:30 2013] Off-axis axis estimate = 6.09'
[Mon Jun  3 00:46:14 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 00:46:14 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Mon Jun  3 00:46:14 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.255
[Mon Jun  3 00:46:14 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 9.48"
[Mon Jun  3 00:46:17 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src32.ximg exists
[Mon Jun  3 00:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src32.csv
[Mon Jun  3 00:46:17 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src32_1.ximg exists
[Mon Jun  3 00:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src32.csv
[Mon Jun  3 00:46:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:46:20 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Mon Jun  3 00:46:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src32.csv
[Mon Jun  3 00:46:20 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Mon Jun  3 00:46:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src32.csv
[Mon Jun  3 00:46:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:47:08 2013] Spatial fit model total counts = 829.542000, observed total counts = 706.000000
[Mon Jun  3 00:47:08 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 00:47:08 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 00:47:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 00:47:08 2013] Assessing source extent using major
[Mon Jun  3 00:47:08 2013] Source does appear to be extended
[Mon Jun  3 00:47:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 00:47:08 2013] Source is confused with source 34
[Mon Jun  3 00:47:35 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 00:47:35 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Mon Jun  3 00:47:35 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.255
[Mon Jun  3 00:47:35 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 9.48"
[Mon Jun  3 00:47:37 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src30.ximg exists
[Mon Jun  3 00:47:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src30.csv
[Mon Jun  3 00:47:37 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon Jun  3 00:47:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src30.csv
[Mon Jun  3 00:47:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:47:40 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon Jun  3 00:47:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon Jun  3 00:47:40 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon Jun  3 00:47:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon Jun  3 00:47:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:48:20 2013] Spatial fit model total counts = 1856.390000, observed total counts = 1619.000000
[Mon Jun  3 00:48:20 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 00:48:20 2013] Warning, spatial fit 30 centroid is now closest to src. 33
[Mon Jun  3 00:48:20 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 00:48:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 00:48:20 2013] Assessing source extent using major
[Mon Jun  3 00:48:20 2013] Source does appear to be extended
[Mon Jun  3 00:48:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 00:48:48 2013] XMMSAS src. selection expression = ellipse(18820.422836, 24140.577179, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun  3 00:48:48 2013] Not overwriting source region fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src35_src.reg
[Mon Jun  3 00:48:48 2013] Extracting stamp from image fullrun_pn_xmm0112522001_pi300-10000_cl_sm2.00.img.gz, (179, 241) - (254, 316)
[Mon Jun  3 00:48:48 2013] XMMSAS bgd. selection expression = annulus(18820.422836, 24140.577179, 1087.500000, 2175.000000, X, Y) && !ellipse(20194.446960, 23174.101379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20498.388000, 25321.720000, 1281.568037, 1281.568037, 13.997000, X, Y) && !ellipse(21861.054200, 26022.819400, 1294.952037, 1294.952037, 0.000000, X, Y) && !ellipse(20108.516000, 24990.632000, 1400.360040, 1400.360040, 0.000000, X, Y) && !ellipse(21681.900000, 24592.114000, 1299.704037, 1299.704037, 0.000000, X, Y) && !ellipse(21910.942000, 24614.434000, 1299.704037, 1299.704037, 0.000000, X, Y) && !ellipse(21083.110489, 24320.112915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20464.698410, 24404.635773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19583.603043, 24508.843018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18238.380000, 24103.338000, 1577.832045, 1577.832045, 0.000000, X, Y) && !ellipse(17273.963852, 23763.724976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20160.240891, 23730.372498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17954.106689, 23795.264069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16742.290253, 23426.663696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18153.738342, 23364.275818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19689.040894, 23090.823730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18514.165207, 23014.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18071.144363, 23006.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16808.359329, 22917.418457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16415.749527, 22489.576416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18255.488000, 22305.976000, 1681.464048, 1681.464048, 133.050000, X, Y) && !ellipse(18960.523422, 22228.902985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17720.004000, 22504.216000, 1115.104032, 1115.104032, 0.000000, X, Y) && !ellipse(16205.606613, 21956.260681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19427.494200, 21433.662000, 1582.336046, 1582.336046, 0.000000, X, Y) && !ellipse(16709.633392, 21615.850082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15957.163574, 21270.284744, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 00:48:48 2013] Writing fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src35.gif
[Mon Jun  3 01:09:46 2013] Mean detx,y = (-8210.35, -318.06) 
[Mon Jun  3 01:09:51 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 01:10:25 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 01:10:25 2013] Setting source spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon Jun  3 01:10:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Mon Jun  3 02:33:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun  3 02:33:01 2013] rmf not generated due to insufficient counts
[Mon Jun  3 09:52:55 2013] Updating aperture counts using extracted products
[Mon Jun  3 09:52:55 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 548.00
[Mon Jun  3 09:52:55 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src35_bgd.pi.gz = 118.00
[Mon Jun  3 09:52:55 2013] Got source and background scale factors 1202598.000000, 867949.000000
[Mon Jun  3 09:52:55 2013] User source parameters:
  Position = (216.9, 278.0) = 12 26 17.15 33 29 34.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 384.5 +/- 24.4
  Background aperture counts = 163.5
  Rate = 0.4 +/- 0.02

[Mon Jun  3 09:52:55 2013] Updating counts from extracted products
[Mon Jun  3 09:52:55 2013] Set source signif. to 384.50/12.79 = 30.07
[Mon Jun  3 09:53:22 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 09:53:22 2013] Using photon index=1.80, rate=0.376, arf fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src35.arf
[Mon Jun  3 09:53:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 09:53:22 2013] Updating source flux to 1.7e-12
[Mon Jun  3 09:53:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  3 09:53:57 2013] xmm0112522001/analysis//spectral/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete