[Mon Jun  3 00:45:16 2013] Detection parameters:
  Position = (227.3, 288.9) = 12 26 13.52 33 30 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.4 +/- 21.8
  Background counts = 127.6
  Rate = 0.09 +/- 0.01

[Mon Jun  3 00:45:30 2013] Off-axis axis estimate = 5.20'
[Mon Jun  3 00:46:14 2013] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 00:46:14 2013] Initial guess for spatial extent in simple fitting = 9.03"
[Mon Jun  3 00:46:14 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.942
[Mon Jun  3 00:46:14 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 9.03"
[Mon Jun  3 00:46:16 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src24.ximg exists
[Mon Jun  3 00:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src24.csv
[Mon Jun  3 00:46:16 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon Jun  3 00:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src24.csv
[Mon Jun  3 00:46:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:46:20 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon Jun  3 00:46:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src24.csv
[Mon Jun  3 00:46:20 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Jun  3 00:46:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src24.csv
[Mon Jun  3 00:46:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:47:07 2013] Spatial fit model total counts = 677.779000, observed total counts = 523.000000
[Mon Jun  3 00:47:07 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 00:47:08 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 00:47:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 00:47:08 2013] Assessing source extent using major
[Mon Jun  3 00:47:08 2013] Source does appear to be extended
[Mon Jun  3 00:47:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 00:47:08 2013] Source is confused with source 21
[Mon Jun  3 00:47:35 2013] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 00:47:35 2013] Initial guess for spatial extent in simple fitting = 9.03"
[Mon Jun  3 00:47:35 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.942
[Mon Jun  3 00:47:35 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 9.03"
[Mon Jun  3 00:47:36 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src22.ximg exists
[Mon Jun  3 00:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src22.csv
[Mon Jun  3 00:47:36 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Jun  3 00:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src22.csv
[Mon Jun  3 00:47:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:47:40 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Jun  3 00:47:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Jun  3 00:47:40 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Jun  3 00:47:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Jun  3 00:47:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:48:20 2013] Spatial fit model total counts = 685.332000, observed total counts = 523.000000
[Mon Jun  3 00:48:20 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 00:48:20 2013] Spatial fit model total counts = 865.723000, observed total counts = 855.000000
[Mon Jun  3 00:48:20 2013] Offset between fit and detection position for source 27 = 4.477038 pixels
[Mon Jun  3 00:48:20 2013] Warning, changing simple spatial fit ID from 22 to 27
[Mon Jun  3 00:48:20 2013] 860.693300 total counts/ 782.707000 bgd. counts: snr = 2.787525
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 4.477038 pixels
  Position = (231.7, 287.8) = 12 26 12.00 33 30 17.0
  Extent = 17.5 (17.3-17.6)", rotation angle = 0
  Source counts = 78.0 +/- 29.3
  Background counts = 782.7
  Rate = 0.08 +/- 0.03
[Mon Jun  3 00:48:20 2013] Spatial fit model total counts = 860.601000, observed total counts = 662.000000
[Mon Jun  3 00:48:20 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 00:48:20 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 00:48:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 00:48:20 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 00:48:20 2013] Source does appear to be extended
[Mon Jun  3 00:48:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 00:48:47 2013] XMMSAS src. selection expression = ellipse(20108.516000, 24990.632000, 1050.270030, 1050.270030, 0.000000, X, Y)
[Mon Jun  3 00:48:47 2013] Not overwriting source region fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src27_src.reg
[Mon Jun  3 00:48:47 2013] Extracting stamp from image fullrun_pn_xmm0112522001_pi300-10000_cl_sm2.00.img.gz, (171, 227) - (292, 348)
[Mon Jun  3 00:48:47 2013] XMMSAS bgd. selection expression = annulus(20108.516000, 24990.632000, 1750.450050, 3500.900101, X, Y) && !ellipse(20194.446960, 23174.101379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22750.459595, 26521.894196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23372.689606, 26913.686249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23858.013031, 26557.928253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23862.555786, 26050.485779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22132.784286, 26219.778412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20498.388000, 25321.720000, 1281.568037, 1281.568037, 13.997000, X, Y) && !ellipse(23630.277893, 25633.470947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22503.164856, 25684.949310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21861.054200, 26022.819400, 1294.952037, 1294.952037, 0.000000, X, Y) && !ellipse(22944.167877, 25172.698578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21681.900000, 24592.114000, 1299.704037, 1299.704037, 0.000000, X, Y) && !ellipse(23733.593048, 24732.603577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21910.942000, 24614.434000, 1299.704037, 1299.704037, 0.000000, X, Y) && !ellipse(21083.110489, 24320.112915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20464.698410, 24404.635773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19583.603043, 24508.843018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18238.380000, 24103.338000, 1577.832045, 1577.832045, 0.000000, X, Y) && !ellipse(18820.422836, 24140.577179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17273.963852, 23763.724976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20160.240891, 23730.372498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17954.106689, 23795.264069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16742.290253, 23426.663696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18153.738342, 23364.275818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19689.040894, 23090.823730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18514.165207, 23014.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18071.144363, 23006.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16808.359329, 22917.418457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16415.749527, 22489.576416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18255.488000, 22305.976000, 1681.464048, 1681.464048, 133.050000, X, Y) && !ellipse(18960.523422, 22228.902985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17720.004000, 22504.216000, 1115.104032, 1115.104032, 0.000000, X, Y) && !ellipse(16205.606613, 21956.260681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19427.494200, 21433.662000, 1582.336046, 1582.336046, 0.000000, X, Y) && !ellipse(16709.633392, 21615.850082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15957.163574, 21270.284744, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 00:48:47 2013] Writing fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src27.gif
[Mon Jun  3 01:03:10 2013] Mean detx,y = (-6523.22, -302.28) 
[Mon Jun  3 01:03:15 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 01:04:05 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 01:04:06 2013] Setting source spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Jun  3 01:04:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon Jun  3 02:27:31 2013] Not generating rmf since there are only 77 counts
[Mon Jun  3 02:27:31 2013] rmf not generated due to insufficient counts
[Mon Jun  3 09:52:51 2013] Updating aperture counts using extracted products
[Mon Jun  3 09:52:51 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 1223.00
[Mon Jun  3 09:52:52 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src27_bgd.pi.gz = 2244.00
[Mon Jun  3 09:52:52 2013] Got source and background scale factors 2956542.000000, 10991426.000000
[Mon Jun  3 09:52:52 2013] User source parameters:
  Position = (231.7, 287.8) = 12 26 12.00 33 30 17.0
  Extent = 17.5 (17.3-17.6)", rotation angle = 0
  Source aperture counts = 619.4 +/- 36.0
  Background aperture counts = 603.6
  Rate = 0.6 +/- 0.04

[Mon Jun  3 09:53:21 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 09:53:21 2013] Using photon index=1.80, rate=0.0763, arf fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src27.arf
[Mon Jun  3 09:53:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 09:53:21 2013] Updating source flux to 2.9e-13
[Mon Jun  3 09:53:41 2013] Flag p found in src. 27 procflags, skipping spectral fitting
[Mon Jun  3 09:53:41 2013] Flag c found in src. 27 procflags, skipping spectral fitting
[Mon Jun  3 09:53:41 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun  3 09:53:57 2013] xmm0112522001/analysis//spectral/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete