[Mon Jun 3 00:45:15 2013] Detection parameters: Position = (269.2, 309.9) = 12 25 58.96 33 31 53.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 262.2 +/- 25.1 Background counts = 105.4 Rate = 0.1 +/- 0.009 [Mon Jun 3 00:45:30 2013] Off-axis axis estimate = 2.28' [Mon Jun 3 00:46:14 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:46:14 2013] Initial guess for spatial extent in simple fitting = 7.57" [Mon Jun 3 00:46:14 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.798 [Mon Jun 3 00:46:14 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.57" [Mon Jun 3 00:46:16 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src13.ximg exists [Mon Jun 3 00:46:16 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src13_1.ximg exists [Mon Jun 3 00:46:16 2013] Fit fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_src13 appears to have run properly [Mon Jun 3 00:46:19 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Mon Jun 3 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src13.csv [Mon Jun 3 00:46:19 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Mon Jun 3 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src13.csv [Mon Jun 3 00:46:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:07 2013] Warning, spatial fit 13 centroid is now closest to src. 17 [Mon Jun 3 00:47:07 2013] Spatial fit model total counts = 802.692000, observed total counts = 695.000000 [Mon Jun 3 00:47:07 2013] Poor agreement between spatial fit and data for source 16 It may help to tweak spatial fit manually Not incorporating fit results [Mon Jun 3 00:47:08 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:47:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:47:08 2013] Assessing source extent using major [Mon Jun 3 00:47:08 2013] Source does appear to be extended [Mon Jun 3 00:47:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:47:08 2013] Source is confused with source 17 [Mon Jun 3 00:47:35 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:47:35 2013] Initial guess for spatial extent in simple fitting = 7.57" [Mon Jun 3 00:47:35 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.798 [Mon Jun 3 00:47:35 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.57" [Mon Jun 3 00:47:36 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src12.ximg exists [Mon Jun 3 00:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src12.csv [Mon Jun 3 00:47:36 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src12_1.ximg exists [Mon Jun 3 00:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src12.csv [Mon Jun 3 00:47:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src12_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:47:39 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Mon Jun 3 00:47:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src12.csv [Mon Jun 3 00:47:39 2013] fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Mon Jun 3 00:47:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src12.csv [Mon Jun 3 00:47:39 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112522001_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:48:20 2013] Source 16 is offset by 0.764892 and -7.811560 pixels which is larger than 2 X fitted extent = 0.840221 x 0.840221, not incorporating fit results [Mon Jun 3 00:48:20 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:48:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:48:20 2013] Assessing source extent using major [Mon Jun 3 00:48:20 2013] Source does appear to be extended [Mon Jun 3 00:48:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:48:46 2013] XMMSAS src. selection expression = ellipse(23372.689606, 26913.686249, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jun 3 00:48:46 2013] Not overwriting source region fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src16_src.reg [Mon Jun 3 00:48:46 2013] Extracting stamp from image fullrun_pn_xmm0112522001_pi300-10000_cl_sm2.00.img.gz, (232, 272) - (307, 347) [Mon Jun 3 00:48:46 2013] XMMSAS bgd. selection expression = annulus(23372.689606, 26913.686249, 1087.500000, 2175.000000, X, Y) && !ellipse(22750.459595, 26521.894196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25878.941681, 28030.396881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23858.013031, 26557.928253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23862.555786, 26050.485779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22132.784286, 26219.778412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24520.920746, 25676.578003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20498.388000, 25321.720000, 1281.568037, 1281.568037, 13.997000, X, Y) && !ellipse(23630.277893, 25633.470947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22503.164856, 25684.949310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21861.054200, 26022.819400, 1294.952037, 1294.952037, 0.000000, X, Y) && !ellipse(22944.167877, 25172.698578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20108.516000, 24990.632000, 1400.360040, 1400.360040, 0.000000, X, Y) && !ellipse(21681.900000, 24592.114000, 1299.704037, 1299.704037, 0.000000, X, Y) && !ellipse(23733.593048, 24732.603577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21910.942000, 24614.434000, 1299.704037, 1299.704037, 0.000000, X, Y) && !ellipse(21083.110489, 24320.112915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20464.698410, 24404.635773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22829.823730, 29824.402832, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jun 3 00:48:46 2013] Writing fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src16.gif [Mon Jun 3 00:55:14 2013] Mean detx,y = (-2899.61, -504.80) [Mon Jun 3 00:55:19 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 3 00:55:50 2013] Binned source spectrum to 10 counts/bin [Mon Jun 3 00:55:51 2013] Setting source spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src16_src_b10.pi.gz [Mon Jun 3 00:55:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src16_bgd.pi.gz [Mon Jun 3 02:20:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 3 02:20:58 2013] rmf not generated due to insufficient counts [Mon Jun 3 09:52:47 2013] Updating aperture counts using extracted products [Mon Jun 3 09:52:47 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 485.00 [Mon Jun 3 09:52:48 2013] Total counts from fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src16_bgd.pi.gz = 694.00 [Mon Jun 3 09:52:48 2013] Got source and background scale factors 1053758.000000, 4210042.000000 [Mon Jun 3 09:52:48 2013] User source parameters: Position = (269.2, 309.9) = 12 25 58.96 33 31 53.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 311.3 +/- 23.0 Background aperture counts = 173.7 Rate = 0.3 +/- 0.02 [Mon Jun 3 09:52:48 2013] Updating counts from extracted products [Mon Jun 3 09:52:48 2013] Set source signif. to 311.29/13.18 = 23.62 [Mon Jun 3 09:53:20 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 3 09:53:20 2013] Using photon index=1.80, rate=0.304, arf fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src16.arf [Mon Jun 3 09:53:20 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 3 09:53:20 2013] Updating source flux to 1e-12 [Mon Jun 3 09:53:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 3 09:53:57 2013] xmm0112522001/analysis//spectral/fullrun_pn_xmm0112522001_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete