[Fri Sep  7 06:35:47 2012] Detection parameters:
  Position = (188.1, 414.1) = 12 28 53.77 44 11 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.6 +/- 8.8
  Background counts = 4.0
  Rate = 0.003 +/- 0.0006

[Fri Sep  7 06:35:48 2012] Off-axis axis estimate = 11.59'
[Fri Sep  7 06:36:10 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 06:36:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 06:36:10 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Fri Sep  7 06:36:10 2012] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.730
[Fri Sep  7 06:36:10 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.22"
[Fri Sep  7 06:36:10 2012] fullrun_mos2_xmm0112521701_pi300-10000_cl_pass0_src18.ximg exists
[Fri Sep  7 06:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112521701_pi300-10000_cl_pass0_src18.csv
[Fri Sep  7 06:36:10 2012] fullrun_mos2_xmm0112521701_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Sep  7 06:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112521701_pi300-10000_cl_pass0_src18.csv
[Fri Sep  7 06:36:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112521701_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112521701_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 06:36:11 2012] fullrun_mos2_xmm0112521701_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Sep  7 06:36:11 2012] fullrun_mos2_xmm0112521701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Sep  7 06:36:11 2012] Fit fullrun_mos2_xmm0112521701_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Sep  7 06:36:26 2012] Spatial fit model total counts = 85.063300, observed total counts = 85.000000
[Fri Sep  7 06:36:26 2012] Offset between fit and detection position for source 8 = 0.080670 pixels
[Fri Sep  7 06:36:26 2012] 85.181100 total counts/ 48.340000 bgd. counts: snr = 5.298821
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.080670 pixels
  Position = (188.1, 414.0) = 12 28 53.75 44 11 50.2
  Extent = 5.7 (3.9-7.4)", rotation angle = 0
  Source counts = 36.8 +/- 9.2
  Background counts = 48.3
  Rate = 0.002 +/- 0.0006
[Fri Sep  7 06:36:26 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 06:36:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 06:36:26 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 06:36:26 2012] Source does appear to be extended
[Fri Sep  7 06:36:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 06:36:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep  7 06:36:38 2012] Initial guess for spatial extent in simple fitting = 5.66"
[Fri Sep  7 06:36:38 2012] source mask rpix=1.3, npix_max = 12, mask sum = 15, frac = 1.155
[Fri Sep  7 06:36:38 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 5.66"
[Fri Sep  7 06:36:39 2012] fullrun_mos2_xmm0112521701_pi300-10000_cl_pass1_src17.ximg exists
[Fri Sep  7 06:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112521701_pi300-10000_cl_pass1_src17.csv
[Fri Sep  7 06:36:39 2012] fullrun_mos2_xmm0112521701_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Sep  7 06:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112521701_pi300-10000_cl_pass1_src17.csv
[Fri Sep  7 06:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112521701_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112521701_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 06:36:39 2012] fullrun_mos2_xmm0112521701_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Sep  7 06:36:39 2012] fullrun_mos2_xmm0112521701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Sep  7 06:36:39 2012] Fit fullrun_mos2_xmm0112521701_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Sep  7 06:36:51 2012] Warning, spatial fit 17 centroid is now closest to src. 7
[Fri Sep  7 06:36:51 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 06:36:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 06:36:51 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 06:36:51 2012] Source does appear to be extended
[Fri Sep  7 06:36:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 06:37:08 2012] XMMSAS src. selection expression = ellipse(16319.431800, 35972.308800, 339.721458, 339.721458, 0.000000, X, Y)
[Fri Sep  7 06:37:08 2012] Not overwriting source region fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_src.reg
[Fri Sep  7 06:37:08 2012] Extracting stamp from image fullrun_mos2_xmm0112521701_pi300-10000_cl_sm2.00.img.gz, (169, 395) - (208, 434)
[Fri Sep  7 06:37:08 2012] XMMSAS bgd. selection expression = annulus(16319.431800, 35972.308800, 566.202429, 1132.404858, X, Y)
[Fri Sep  7 06:37:08 2012] Writing fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8.gif
[Fri Sep  7 06:37:08 2012] ../../xmm0112521701/products/events/fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0112521701/products/events/fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Fri Sep  7 06:37:08 2012] Mean detx,y = (3503.31, 12077.02) 
[Fri Sep  7 06:37:08 2012] ../../xmm0112521701/products/images/fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_src.img and ../../xmm0112521701/products/images/fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Fri Sep  7 06:37:08 2012] ../../xmm0112521701/products/spectra/fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0112521701/products/spectra/fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Fri Sep  7 06:37:08 2012] Setting source spectrum file to fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Sep  7 06:37:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Sep  7 06:37:08 2012] ../../xmm0112521701/products/lightcurves/fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0112521701/products/lightcurves/fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Fri Sep  7 06:37:09 2012] Not generating rmf since there are only 36 counts
[Fri Sep  7 06:37:09 2012] rmf not generated due to insufficient counts
[Fri Sep  7 06:37:09 2012] fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8.arf exists, delete to re-create
[Fri Sep  7 06:37:27 2012] Updating aperture counts using extracted products
[Fri Sep  7 06:37:27 2012] Error reading totcts from fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Sep  7 06:37:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri Sep  7 06:37:27 2012] Using photon index=1.80, rate=0.00241, arf fullrun_mos2_xmm0112521701_pi300-10000_pass1_cl_src8.arf
[Fri Sep  7 06:37:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep  7 06:37:27 2012] Updating source flux to 7e-14
[Fri Sep  7 06:37:30 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting