[Fri Sep  7 06:35:46 2012] Detection parameters:
  Position = (293.6, 300.7) = 12 28 11.07 44 3 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.6 +/- 14.0
  Background counts = 5.7
  Rate = 0.009 +/- 0.001

[Fri Sep  7 06:35:47 2012] Off-axis axis estimate = 0.39'
[Fri Sep  7 06:36:08 2012] Using EEF radius (= 6.62 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 06:36:08 2012] Initial guess for spatial extent in simple fitting = 6.62"
[Fri Sep  7 06:36:08 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.978
[Fri Sep  7 06:36:08 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.62"
[Fri Sep  7 06:36:09 2012] fullrun_mos1_xmm0112521701_pi300-10000_cl_pass0_src7.ximg exists
[Fri Sep  7 06:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521701_pi300-10000_cl_pass0_src7.csv
[Fri Sep  7 06:36:09 2012] fullrun_mos1_xmm0112521701_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Sep  7 06:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521701_pi300-10000_cl_pass0_src7.csv
[Fri Sep  7 06:36:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112521701_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112521701_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 06:36:09 2012] fullrun_mos1_xmm0112521701_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Sep  7 06:36:09 2012] fullrun_mos1_xmm0112521701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Sep  7 06:36:09 2012] Fit fullrun_mos1_xmm0112521701_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Sep  7 06:36:23 2012] Spatial fit model total counts = 177.000000, observed total counts = 177.000000
[Fri Sep  7 06:36:23 2012] Offset between fit and detection position for source 10 = 0.310108 pixels
[Fri Sep  7 06:36:23 2012] 178.215100 total counts/ 88.519000 bgd. counts: snr = 9.533565
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.310108 pixels
  Position = (293.8, 300.4) = 12 28 11.00 44 3 36.6
  Extent = 5.8 (4.9-6.8)", rotation angle = 0
  Source counts = 89.7 +/- 13.3
  Background counts = 88.5
  Rate = 0.006 +/- 0.0009
[Fri Sep  7 06:36:23 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 06:36:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 06:36:23 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 06:36:23 2012] Source does appear to be extended
[Fri Sep  7 06:36:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 06:36:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep  7 06:36:37 2012] Initial guess for spatial extent in simple fitting = 5.82"
[Fri Sep  7 06:36:37 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.887
[Fri Sep  7 06:36:37 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 5.82"
[Fri Sep  7 06:36:37 2012] fullrun_mos1_xmm0112521701_pi300-10000_cl_pass1_src7.ximg exists
[Fri Sep  7 06:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521701_pi300-10000_cl_pass1_src7.csv
[Fri Sep  7 06:36:37 2012] fullrun_mos1_xmm0112521701_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Sep  7 06:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521701_pi300-10000_cl_pass1_src7.csv
[Fri Sep  7 06:36:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112521701_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112521701_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 06:36:38 2012] fullrun_mos1_xmm0112521701_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Sep  7 06:36:38 2012] fullrun_mos1_xmm0112521701_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Sep  7 06:36:38 2012] Fit fullrun_mos1_xmm0112521701_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Sep  7 06:36:48 2012] Spatial fit model total counts = 174.000000, observed total counts = 174.000000
[Fri Sep  7 06:36:48 2012] Offset between fit and detection position for source 10 = 0.016875 pixels
[Fri Sep  7 06:36:48 2012] 175.625400 total counts/ 86.769700 bgd. counts: snr = 9.538965
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.016875 pixels
  Position = (293.8, 300.4) = 12 28 11.01 44 3 36.6
  Extent = 5.8 (4.8-6.7)", rotation angle = 0
  Source counts = 88.9 +/- 13.3
  Background counts = 86.8
  Rate = 0.006 +/- 0.0009
[Fri Sep  7 06:36:48 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 06:36:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 06:36:48 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 06:36:48 2012] Source does appear to be extended
[Fri Sep  7 06:36:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 06:37:06 2012] XMMSAS src. selection expression = ellipse(25510.559200, 26089.053000, 345.486010, 345.486010, 0.000000, X, Y)
[Fri Sep  7 06:37:06 2012] Not overwriting source region fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_src.reg
[Fri Sep  7 06:37:06 2012] Extracting stamp from image fullrun_mos1_xmm0112521701_pi300-10000_cl_sm2.00.img.gz, (274, 281) - (314, 320)
[Fri Sep  7 06:37:06 2012] XMMSAS bgd. selection expression = annulus(25510.559200, 26089.053000, 575.810017, 1151.620033, X, Y) && !ellipse(24864.839966, 27556.415741, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep  7 06:37:06 2012] Writing fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10.gif
[Fri Sep  7 06:37:06 2012] ../../xmm0112521701/products/events/fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0112521701/products/events/fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Sep  7 06:37:06 2012] Mean detx,y = (-1039.29, -1609.39) 
[Fri Sep  7 06:37:06 2012] ../../xmm0112521701/products/images/fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_src.img and ../../xmm0112521701/products/images/fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Sep  7 06:37:06 2012] ../../xmm0112521701/products/spectra/fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0112521701/products/spectra/fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Sep  7 06:37:06 2012] Setting source spectrum file to fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Sep  7 06:37:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Sep  7 06:37:06 2012] ../../xmm0112521701/products/lightcurves/fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0112521701/products/lightcurves/fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Sep  7 06:37:08 2012] Not generating rmf since there are only 88 counts
[Fri Sep  7 06:37:08 2012] rmf not generated due to insufficient counts
[Fri Sep  7 06:37:08 2012] fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Fri Sep  7 06:37:26 2012] Updating aperture counts using extracted products
[Fri Sep  7 06:37:26 2012] Error reading totcts from fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Sep  7 06:37:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Sep  7 06:37:26 2012] Using photon index=1.80, rate=0.00582, arf fullrun_mos1_xmm0112521701_pi300-10000_pass1_cl_src10.arf
[Fri Sep  7 06:37:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep  7 06:37:26 2012] Updating source flux to 6.8e-14
[Fri Sep  7 06:37:29 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting