[Sat Aug 25 10:00:49 2012] Detection parameters:
  Position = (250.4, 289.1) = 12 28 27.10 44 2 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.4 +/- 23.5
  Background counts = 194.8
  Rate = 0.03 +/- 0.005

[Sat Aug 25 10:00:53 2012] Off-axis axis estimate = 3.55'
[Sat Aug 25 10:01:23 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:01:23 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Sat Aug 25 10:01:23 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.879
[Sat Aug 25 10:01:23 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 8.20"
[Sat Aug 25 10:01:27 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src41.ximg exists
[Sat Aug 25 10:01:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src41.csv
[Sat Aug 25 10:01:27 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src41_1.ximg exists
[Sat Aug 25 10:01:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src41.csv
[Sat Aug 25 10:01:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:01:29 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sat Aug 25 10:01:29 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sat Aug 25 10:01:29 2012] Fit fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sat Aug 25 10:01:56 2012] Source 43 is offset by -4.481856 and -6.088734 pixels which is larger than
2 X fitted extent = 3.334483 x 3.334483, not incorporating fit results
[Sat Aug 25 10:01:56 2012] Spatial fit model total counts = 1677.650000, observed total counts = 1674.000000
[Sat Aug 25 10:01:56 2012] Offset between fit and detection position for source 43 = 5.474227 pixels
[Sat Aug 25 10:01:56 2012] 1585.499000 total counts/ 1105.720000 bgd. counts: snr = 14.428416
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 5.474227 pixels
  Position = (254.3, 293.0) = 12 28 25.55 44 3 4.6
  Extent = 16.4 (16.3-16.4)", rotation angle = 0
  Source counts = 479.8 +/- 39.8
  Background counts = 1105.7
  Rate = 0.2 +/- 0.02
[Sat Aug 25 10:01:56 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:01:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:01:56 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 10:01:56 2012] Source does appear to be extended
[Sat Aug 25 10:01:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 10:01:56 2012] Source is confused with source 22
[Sat Aug 25 10:02:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:02:17 2012] Initial guess for spatial extent in simple fitting = 16.38"
[Sat Aug 25 10:02:17 2012] source mask rpix=3.8, npix_max = 72, mask sum = 63, frac = 0.865
[Sat Aug 25 10:02:17 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 16.38"
[Sat Aug 25 10:02:19 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src39.ximg exists
[Sat Aug 25 10:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src39.csv
[Sat Aug 25 10:02:19 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat Aug 25 10:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src39.csv
[Sat Aug 25 10:02:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:02:23 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat Aug 25 10:02:23 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Aug 25 10:02:23 2012] Fit fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sat Aug 25 10:02:50 2012] Warning, spatial fit 39 centroid is now closest to src. 37
[Sat Aug 25 10:02:50 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:02:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:02:50 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 10:02:50 2012] Source does appear to be extended
[Sat Aug 25 10:02:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 10:03:13 2012] XMMSAS src. selection expression = ellipse(22071.856000, 25441.334000, 982.920028, 982.920028, 0.000000, X, Y)
[Sat Aug 25 10:03:13 2012] Not overwriting source region fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_src.reg
[Sat Aug 25 10:03:13 2012] Extracting stamp from image fullrun_pn_xmm0112521601_pi300-10000_cl_sm2.00.img.gz, (198, 236) - (311, 349)
[Sat Aug 25 10:03:13 2012] XMMSAS bgd. selection expression = annulus(22071.856000, 25441.334000, 1638.200047, 3276.400094, X, Y) && !ellipse(17480.218000, 21553.044000, 1696.528049, 1696.528049, 0.000000, X, Y) && !ellipse(19739.807709, 22754.866943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22771.630798, 26071.553436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19164.770560, 23064.058400, 682.499220, 682.499220, 0.000000, X, Y) && !ellipse(19160.342000, 22768.094000, 2354.336068, 2354.336068, 0.000000, X, Y) && !ellipse(23362.438000, 26233.008000, 2621.120075, 2621.120075, 0.000000, X, Y) && !ellipse(25551.883200, 27923.641000, 579.127217, 579.127217, 0.000000, X, Y) && !ellipse(23761.010000, 26033.950000, 1143.792033, 1143.792033, 0.000000, X, Y) && !ellipse(24096.768000, 25492.194000, 1099.512032, 1099.512032, 0.000000, X, Y) && !ellipse(24727.094000, 24420.932000, 2047.840059, 2047.840059, 0.000000, X, Y) && !ellipse(23776.146540, 24937.602215, 1182.032034, 633.598945, 34.191813, X, Y) && !ellipse(20542.098000, 23922.654000, 2273.696065, 2273.696065, 0.000000, X, Y) && !ellipse(20325.056000, 23924.124000, 1385.104040, 1385.104040, 0.000000, X, Y) && !ellipse(25247.198000, 23862.910000, 2278.456066, 1781.008051, 236.633000, X, Y) && !ellipse(25765.285000, 23429.926000, 1221.848035, 1221.848035, 0.000000, X, Y) && !ellipse(20287.526000, 23364.828000, 1136.848033, 1136.848033, 0.000000, X, Y) && !ellipse(26033.050000, 23173.722000, 1189.464034, 1088.992031, 46.415000, X, Y) && !ellipse(26091.100000, 22676.730000, 2551.264073, 2551.264073, 0.000000, X, Y) && !ellipse(26283.484000, 22296.084000, 1293.800037, 1293.800037, 0.000000, X, Y) && !ellipse(26586.670000, 21936.666000, 1275.632037, 1275.632037, 0.000000, X, Y) && !ellipse(18926.485947, 21426.606232, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 10:03:13 2012] Writing fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43.gif
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/events/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_src.evt and ../../xmm0112521601/products/events/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_bgd.evt exist, delete to re-create
[Sat Aug 25 10:03:18 2012] Mean detx,y = (-4373.70, -490.09) 
[Sat Aug 25 10:03:18 2012] ../../xmm0112521601/products/images/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_src.img and ../../xmm0112521601/products/images/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_bgd.img exist, delete to re-create
[Sat Aug 25 10:03:18 2012] ../../xmm0112521601/products/spectra/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_src_b10.pi.gz and ../../xmm0112521601/products/spectra/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_bgd.pi exist, delete to re-create
[Sat Aug 25 10:03:18 2012] Setting source spectrum file to fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Aug 25 10:03:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Aug 25 10:03:18 2012] ../../xmm0112521601/products/lightcurves/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_src.lc and ../../xmm0112521601/products/lightcurves/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_bgd.lc exist, delete to re-create
[Sat Aug 25 10:03:40 2012] fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43.rmf exists, delete to re-create
[Sat Aug 25 10:03:40 2012] fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43.arf exists, delete to re-create
[Sat Aug 25 10:04:47 2012] Updating aperture counts using extracted products
[Sat Aug 25 10:04:47 2012] Error reading totcts from fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Aug 25 10:04:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 25 10:04:54 2012] Using photon index=1.80, rate=0.182, arf fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src43.arf
[Sat Aug 25 10:04:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 25 10:04:54 2012] Updating source flux to 5.7e-13
[Sat Aug 25 10:05:02 2012] Flag b found in src. 43 procflags, skipping spectral fitting
[Sat Aug 25 10:05:02 2012] Flag c found in src. 43 procflags, skipping spectral fitting