[Sat Aug 25 10:00:46 2012] Detection parameters:
  Position = (205.3, 238.9) = 12 28 45.24 43 59 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.1 +/- 23.9
  Background counts = 183.8
  Rate = 0.02 +/- 0.003

[Sat Aug 25 10:00:53 2012] Off-axis axis estimate = 8.01'
[Sat Aug 25 10:01:23 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:01:23 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Sat Aug 25 10:01:23 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.071
[Sat Aug 25 10:01:23 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 10.44"
[Sat Aug 25 10:01:27 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src27.ximg exists
[Sat Aug 25 10:01:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src27.csv
[Sat Aug 25 10:01:27 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Aug 25 10:01:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src27.csv
[Sat Aug 25 10:01:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:01:28 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Aug 25 10:01:28 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Aug 25 10:01:28 2012] Fit fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Aug 25 10:01:56 2012] Warning, spatial fit 27 centroid is now closest to src. 30
[Sat Aug 25 10:01:56 2012] Source 29 is offset by 1.265286 and -3.205234 pixels which is larger than
2 X fitted extent = 1.258391 x 1.258391, not incorporating fit results
[Sat Aug 25 10:01:56 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:01:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:01:56 2012] Assessing source extent using major
[Sat Aug 25 10:01:56 2012] Source does appear to be extended
[Sat Aug 25 10:01:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 10:02:17 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:02:17 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Sat Aug 25 10:02:17 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.071
[Sat Aug 25 10:02:17 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 10.44"
[Sat Aug 25 10:02:19 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src26.ximg exists
[Sat Aug 25 10:02:19 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat Aug 25 10:02:19 2012] Fit fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src26 appears to have run properly
[Sat Aug 25 10:02:23 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat Aug 25 10:02:23 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Aug 25 10:02:23 2012] Fit fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sat Aug 25 10:02:50 2012] Warning, spatial fit 26 centroid is now closest to src. 11
[Sat Aug 25 10:02:50 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:02:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:02:50 2012] Assessing source extent using major
[Sat Aug 25 10:02:50 2012] Source does appear to be extended
[Sat Aug 25 10:02:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 10:02:50 2012] Source is confused with source 17
[Sat Aug 25 10:03:12 2012] XMMSAS src. selection expression = ellipse(17815.419907, 20732.484665, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 25 10:03:12 2012] Not overwriting source region fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_src.reg
[Sat Aug 25 10:03:12 2012] Extracting stamp from image fullrun_pn_xmm0112521601_pi300-10000_cl_sm2.00.img.gz, (168, 201) - (243, 276)
[Sat Aug 25 10:03:12 2012] XMMSAS bgd. selection expression = annulus(17815.419907, 20732.484665, 1087.500000, 2175.000000, X, Y) && !ellipse(15992.094467, 18945.169388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14646.691382, 19414.983497, 2063.864059, 769.639677, 319.302955, X, Y) && !ellipse(15802.254000, 20167.402000, 1527.952044, 1527.952044, 0.000000, X, Y) && !ellipse(17480.218000, 21553.044000, 1696.528049, 1696.528049, 0.000000, X, Y) && !ellipse(18187.247800, 22339.888600, 571.753616, 571.753616, 0.000000, X, Y) && !ellipse(16631.344543, 20827.930313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19739.807709, 22754.866943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19164.770560, 23064.058400, 682.499220, 682.499220, 0.000000, X, Y) && !ellipse(19160.342000, 22768.094000, 2354.336068, 2354.336068, 0.000000, X, Y) && !ellipse(16319.567000, 20343.104000, 1786.824051, 1786.824051, 0.000000, X, Y) && !ellipse(16813.370000, 19716.892000, 1832.664053, 1832.664053, 0.000000, X, Y) && !ellipse(20542.098000, 23922.654000, 2273.696065, 2273.696065, 0.000000, X, Y) && !ellipse(20325.056000, 23924.124000, 1385.104040, 1385.104040, 0.000000, X, Y) && !ellipse(20287.526000, 23364.828000, 1136.848033, 1136.848033, 0.000000, X, Y) && !ellipse(18926.485947, 21426.606232, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 10:03:12 2012] Writing fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29.gif
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/events/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0112521601/products/events/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Sat Aug 25 10:03:17 2012] Mean detx,y = (-10607.35, 257.85) 
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/images/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_src.img and ../../xmm0112521601/products/images/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/spectra/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0112521601/products/spectra/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Sat Aug 25 10:03:17 2012] Setting source spectrum file to fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Aug 25 10:03:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/lightcurves/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0112521601/products/lightcurves/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Sat Aug 25 10:03:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 10:03:40 2012] rmf not generated due to insufficient counts
[Sat Aug 25 10:03:40 2012] fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Sat Aug 25 10:04:46 2012] Updating aperture counts using extracted products
[Sat Aug 25 10:04:46 2012] Error reading totcts from fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Aug 25 10:04:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 25 10:04:52 2012] Using photon index=1.80, rate=0.0161, arf fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src29.arf
[Sat Aug 25 10:04:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 25 10:04:53 2012] Updating source flux to 8.1e-14
[Sat Aug 25 10:05:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting