[Sat Aug 25 10:00:46 2012] Detection parameters:
  Position = (185.9, 236.1) = 12 28 53.08 43 58 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.5 +/- 21.5
  Background counts = 162.5
  Rate = 0.01 +/- 0.003

[Sat Aug 25 10:00:53 2012] Off-axis axis estimate = 9.33'
[Sat Aug 25 10:01:23 2012] Using EEF radius (= 11.09 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:01:23 2012] Initial guess for spatial extent in simple fitting = 11.09"
[Sat Aug 25 10:01:23 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Sat Aug 25 10:01:23 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 11.09"
[Sat Aug 25 10:01:27 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src26.ximg exists
[Sat Aug 25 10:01:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src26.csv
[Sat Aug 25 10:01:27 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Aug 25 10:01:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src26.csv
[Sat Aug 25 10:01:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:01:28 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Aug 25 10:01:28 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Aug 25 10:01:28 2012] Fit fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sat Aug 25 10:01:56 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 10.680429 pixels away
[Sat Aug 25 10:01:56 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:01:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:01:56 2012] Assessing source extent using major
[Sat Aug 25 10:01:56 2012] Source does appear to be extended
[Sat Aug 25 10:01:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 10:01:56 2012] Source is confused with source 12
[Sat Aug 25 10:02:17 2012] Using EEF radius (= 11.09 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:02:17 2012] Initial guess for spatial extent in simple fitting = 11.09"
[Sat Aug 25 10:02:17 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Sat Aug 25 10:02:17 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 11.09"
[Sat Aug 25 10:02:19 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src25.ximg exists
[Sat Aug 25 10:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src25.csv
[Sat Aug 25 10:02:19 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Aug 25 10:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src25.csv
[Sat Aug 25 10:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:02:23 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Aug 25 10:02:23 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Aug 25 10:02:23 2012] Fit fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Aug 25 10:02:50 2012] Spatial fit model total counts = 2539.550000, observed total counts = 2539.000000
[Sat Aug 25 10:02:50 2012] Offset between fit and detection position for source 28 = 2.835726 pixels
[Sat Aug 25 10:02:50 2012] Warning, changing simple spatial fit ID from 25 to 10
[Sat Aug 25 10:02:50 2012] 2518.243000 total counts/ 1718.200000 bgd. counts: snr = 19.300852
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 2.835726 pixels
  Position = (188.1, 234.4) = 12 28 52.17 43 58 49.2
  Extent = 22.3 (22.3-44.7)", rotation angle = 0
  Source counts = 800.0 +/- 50.2
  Background counts = 1718.2
  Rate = 0.3 +/- 0.02
[Sat Aug 25 10:02:50 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:02:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:02:50 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 10:02:50 2012] Source does appear to be extended
[Sat Aug 25 10:02:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 10:03:12 2012] XMMSAS src. selection expression = ellipse(16319.567000, 20343.104000, 1340.118039, 1340.118039, 0.000000, X, Y)
[Sat Aug 25 10:03:12 2012] Not overwriting source region fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_src.reg
[Sat Aug 25 10:03:12 2012] Extracting stamp from image fullrun_pn_xmm0112521601_pi300-10000_cl_sm2.00.img.gz, (111, 157) - (265, 311)
[Sat Aug 25 10:03:12 2012] XMMSAS bgd. selection expression = annulus(16319.567000, 20343.104000, 2233.530064, 4467.060129, X, Y) && !ellipse(15992.094467, 18945.169388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14646.691382, 19414.983497, 2063.864059, 769.639677, 319.302955, X, Y) && !ellipse(12730.653824, 17710.408188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12643.944000, 17130.860000, 1926.984055, 1926.984055, 0.000000, X, Y) && !ellipse(11781.774000, 16595.578000, 2111.656061, 2111.656061, 0.000000, X, Y) && !ellipse(11597.050568, 16172.755936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15802.254000, 20167.402000, 1527.952044, 1527.952044, 0.000000, X, Y) && !ellipse(17480.218000, 21553.044000, 1696.528049, 1696.528049, 0.000000, X, Y) && !ellipse(18187.247800, 22339.888600, 571.753616, 571.753616, 0.000000, X, Y) && !ellipse(16631.344543, 20827.930313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13496.000000, 18139.708000, 2063.864059, 2063.864059, 0.000000, X, Y) && !ellipse(19739.807709, 22754.866943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19164.770560, 23064.058400, 682.499220, 682.499220, 0.000000, X, Y) && !ellipse(19160.342000, 22768.094000, 2354.336068, 2354.336068, 0.000000, X, Y) && !ellipse(17815.419907, 20732.484665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16813.370000, 19716.892000, 1832.664053, 1832.664053, 0.000000, X, Y) && !ellipse(23362.438000, 26233.008000, 2621.120075, 2621.120075, 0.000000, X, Y) && !ellipse(22071.856000, 25441.334000, 1310.560038, 1310.560038, 0.000000, X, Y) && !ellipse(20542.098000, 23922.654000, 2273.696065, 2273.696065, 0.000000, X, Y) && !ellipse(20325.056000, 23924.124000, 1385.104040, 1385.104040, 0.000000, X, Y) && !ellipse(20287.526000, 23364.828000, 1136.848033, 1136.848033, 0.000000, X, Y) && !ellipse(18926.485947, 21426.606232, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 10:03:12 2012] Writing fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28.gif
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/events/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0112521601/products/events/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sat Aug 25 10:03:17 2012] Mean detx,y = (-11892.13, -201.92) 
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/images/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_src.img and ../../xmm0112521601/products/images/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/spectra/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_src_b10.pi.gz and ../../xmm0112521601/products/spectra/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sat Aug 25 10:03:17 2012] Setting source spectrum file to fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Aug 25 10:03:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/lightcurves/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0112521601/products/lightcurves/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sat Aug 25 10:03:40 2012] fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28.rmf exists, delete to re-create
[Sat Aug 25 10:03:40 2012] fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28.arf exists, delete to re-create
[Sat Aug 25 10:04:46 2012] Updating aperture counts using extracted products
[Sat Aug 25 10:04:46 2012] Error reading totcts from fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Aug 25 10:04:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 25 10:04:52 2012] Using photon index=1.80, rate=0.303, arf fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src28.arf
[Sat Aug 25 10:04:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 25 10:04:52 2012] Updating source flux to 1.6e-12
[Sat Aug 25 10:05:02 2012] Flag c found in src. 28 procflags, skipping spectral fitting