[Sat Aug 25 10:00:46 2012] Detection parameters:
  Position = (222.1, 265.6) = 12 28 38.51 44 1 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.4 +/- 20.3
  Background counts = 171.0
  Rate = 0.02 +/- 0.003

[Sat Aug 25 10:00:53 2012] Off-axis axis estimate = 6.02'
[Sat Aug 25 10:01:23 2012] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:01:23 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Sat Aug 25 10:01:23 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.017
[Sat Aug 25 10:01:23 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.44"
[Sat Aug 25 10:01:26 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src21.ximg exists
[Sat Aug 25 10:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src21.csv
[Sat Aug 25 10:01:26 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat Aug 25 10:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src21.csv
[Sat Aug 25 10:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:01:28 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat Aug 25 10:01:28 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Aug 25 10:01:28 2012] Fit fullrun_pn_xmm0112521601_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sat Aug 25 10:01:56 2012] Spatial fit model total counts = 1269.820000, observed total counts = 1273.000000
[Sat Aug 25 10:01:56 2012] Offset between fit and detection position for source 23 = 0.938361 pixels
[Sat Aug 25 10:01:56 2012] 921.893000 total counts/ 699.140000 bgd. counts: snr = 8.424449
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.938361 pixels
  Position = (221.2, 265.9) = 12 28 38.87 44 1 6.6
  Extent = 8.7 (7.7-9.9)", rotation angle = 0
  Source counts = 222.8 +/- 30.4
  Background counts = 699.1
  Rate = 0.08 +/- 0.01
[Sat Aug 25 10:01:56 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:01:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:01:56 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 10:01:56 2012] Source does appear to be extended
[Sat Aug 25 10:01:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 10:01:56 2012] Source is confused with source 21
[Sat Aug 25 10:02:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:02:17 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Sat Aug 25 10:02:17 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 1.000
[Sat Aug 25 10:02:17 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.70"
[Sat Aug 25 10:02:19 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src21.ximg exists
[Sat Aug 25 10:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src21.csv
[Sat Aug 25 10:02:19 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Aug 25 10:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src21.csv
[Sat Aug 25 10:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:02:23 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Aug 25 10:02:23 2012] fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Aug 25 10:02:23 2012] Fit fullrun_pn_xmm0112521601_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Aug 25 10:02:50 2012] Spatial fit model total counts = 1307.010000, observed total counts = 1311.000000
[Sat Aug 25 10:02:50 2012] Offset between fit and detection position for source 23 = 0.412734 pixels
[Sat Aug 25 10:02:50 2012] 1181.059000 total counts/ 996.469000 bgd. counts: snr = 5.847581
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.412734 pixels
  Position = (220.8, 265.7) = 12 28 39.01 44 1 5.6
  Extent = 8.5 (6.7-9.9)", rotation angle = 0
  Source counts = 184.6 +/- 34.4
  Background counts = 996.5
  Rate = 0.07 +/- 0.01
[Sat Aug 25 10:02:50 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:02:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:02:50 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 10:02:50 2012] Source does appear to be extended
[Sat Aug 25 10:02:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 10:03:11 2012] XMMSAS src. selection expression = ellipse(19164.770560, 23064.058400, 511.874415, 511.874415, 0.000000, X, Y)
[Sat Aug 25 10:03:11 2012] Not overwriting source region fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_src.reg
[Sat Aug 25 10:03:11 2012] Extracting stamp from image fullrun_pn_xmm0112521601_pi300-10000_cl_sm2.00.img.gz, (191, 236) - (250, 295)
[Sat Aug 25 10:03:11 2012] XMMSAS bgd. selection expression = annulus(19164.770560, 23064.058400, 853.124025, 1706.248049, X, Y) && !ellipse(17480.218000, 21553.044000, 1696.528049, 1696.528049, 0.000000, X, Y) && !ellipse(18187.247800, 22339.888600, 571.753616, 571.753616, 0.000000, X, Y) && !ellipse(16631.344543, 20827.930313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19739.807709, 22754.866943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19160.342000, 22768.094000, 2354.336068, 2354.336068, 0.000000, X, Y) && !ellipse(16319.567000, 20343.104000, 1786.824051, 1786.824051, 0.000000, X, Y) && !ellipse(17815.419907, 20732.484665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16813.370000, 19716.892000, 1832.664053, 1832.664053, 0.000000, X, Y) && !ellipse(23362.438000, 26233.008000, 2621.120075, 2621.120075, 0.000000, X, Y) && !ellipse(22071.856000, 25441.334000, 1310.560038, 1310.560038, 0.000000, X, Y) && !ellipse(20542.098000, 23922.654000, 2273.696065, 2273.696065, 0.000000, X, Y) && !ellipse(20325.056000, 23924.124000, 1385.104040, 1385.104040, 0.000000, X, Y) && !ellipse(20287.526000, 23364.828000, 1136.848033, 1136.848033, 0.000000, X, Y) && !ellipse(18926.485947, 21426.606232, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 10:03:11 2012] Writing fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23.gif
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/events/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0112521601/products/events/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Sat Aug 25 10:03:17 2012] Mean detx,y = (-8113.13, -584.78) 
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/images/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_src.img and ../../xmm0112521601/products/images/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/spectra/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0112521601/products/spectra/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Sat Aug 25 10:03:17 2012] Setting source spectrum file to fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Aug 25 10:03:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Aug 25 10:03:17 2012] ../../xmm0112521601/products/lightcurves/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0112521601/products/lightcurves/fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Sat Aug 25 10:03:40 2012] fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23.rmf exists, delete to re-create
[Sat Aug 25 10:03:40 2012] fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23.arf exists, delete to re-create
[Sat Aug 25 10:04:46 2012] Updating aperture counts using extracted products
[Sat Aug 25 10:04:46 2012] Error reading totcts from fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Aug 25 10:04:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 25 10:04:52 2012] Using photon index=1.80, rate=0.0698, arf fullrun_pn_xmm0112521601_pi300-10000_pass1_cl_src23.arf
[Sat Aug 25 10:04:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 25 10:04:52 2012] Updating source flux to 3.1e-13
[Sat Aug 25 10:05:02 2012] Flag c found in src. 23 procflags, skipping spectral fitting