[Tue Apr 10 14:34:01 2012] Detection parameters:
  Position = (470.9, 280.2) = 9 55 32.73 69 0 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1500.7 +/- 47.2
  Background counts = 7.2
  Rate = 0.1 +/- 0.004

[Tue Apr 10 14:34:01 2012] Off-axis axis estimate = 12.57'
[Tue Apr 10 14:34:22 2012] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 14:34:22 2012] Initial guess for spatial extent in simple fitting = 12.71"
[Tue Apr 10 14:34:22 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.046
[Tue Apr 10 14:34:22 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.71"
[Tue Apr 10 14:34:23 2012] fullrun_mos1_xmm0112521101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Apr 10 14:34:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521101_pi300-10000_cl_pass0_src3.csv
[Tue Apr 10 14:34:23 2012] fullrun_mos1_xmm0112521101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Apr 10 14:34:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521101_pi300-10000_cl_pass0_src3.csv
[Tue Apr 10 14:34:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112521101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112521101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 14:34:23 2012] fullrun_mos1_xmm0112521101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Apr 10 14:34:23 2012] fullrun_mos1_xmm0112521101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Apr 10 14:34:23 2012] Fit fullrun_mos1_xmm0112521101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Apr 10 14:34:34 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.044928 pixels away
[Tue Apr 10 14:34:34 2012] Spatial fit model total counts = 732.428000, observed total counts = 732.000000
[Tue Apr 10 14:34:34 2012] Offset between fit and detection position for source 3 = 2.866563 pixels
[Tue Apr 10 14:34:34 2012] Warning, changing simple spatial fit ID from 3 to 5
[Tue Apr 10 14:34:34 2012] 711.396000 total counts/ 365.925000 bgd. counts: snr = 18.059909
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.866563 pixels
  Position = (468.0, 280.0) = 9 55 35.05 69 0 32.5
  Extent = 8.1 (7.3-8.9)", rotation angle = 0
  Source counts = 345.5 +/- 26.7
  Background counts = 365.9
  Rate = 0.03 +/- 0.003
[Tue Apr 10 14:34:34 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 14:34:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 14:34:34 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 14:34:34 2012] Source does appear to be extended
[Tue Apr 10 14:34:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 14:34:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 14:34:48 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Tue Apr 10 14:34:48 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.715
[Tue Apr 10 14:34:48 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.12"
[Tue Apr 10 14:34:48 2012] fullrun_mos1_xmm0112521101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Apr 10 14:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521101_pi300-10000_cl_pass1_src3.csv
[Tue Apr 10 14:34:48 2012] fullrun_mos1_xmm0112521101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Apr 10 14:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521101_pi300-10000_cl_pass1_src3.csv
[Tue Apr 10 14:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112521101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112521101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 14:34:49 2012] fullrun_mos1_xmm0112521101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Apr 10 14:34:49 2012] fullrun_mos1_xmm0112521101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Apr 10 14:34:49 2012] Fit fullrun_mos1_xmm0112521101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Apr 10 14:34:59 2012] Spatial fit model total counts = 1305.400000, observed total counts = 1346.000000
[Tue Apr 10 14:34:59 2012] Offset between fit and detection position for source 3 = 2.610766 pixels
[Tue Apr 10 14:34:59 2012] 1332.659000 total counts/ 363.484000 bgd. counts: snr = 50.834617
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.610766 pixels
  Position = (470.6, 280.4) = 9 55 32.95 69 0 33.9
  Extent = 5.8 (5.8-5.8)", rotation angle = 0
  Source counts = 969.2 +/- 36.5
  Background counts = 363.5
  Rate = 0.09 +/- 0.003
[Tue Apr 10 14:34:59 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 14:34:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 14:34:59 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 14:34:59 2012] Source does appear to be extended
[Tue Apr 10 14:34:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 14:35:15 2012] XMMSAS src. selection expression = ellipse(40893.562000, 24343.416000, 348.120010, 348.120010, 0.000000, X, Y)
[Tue Apr 10 14:35:15 2012] Not overwriting source region fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_src.reg
[Tue Apr 10 14:35:15 2012] Extracting stamp from image fullrun_mos1_xmm0112521101_pi300-10000_cl_sm2.00.img.gz, (451, 260) - (491, 300)
[Tue Apr 10 14:35:15 2012] XMMSAS bgd. selection expression = annulus(40893.562000, 24343.416000, 580.200017, 1160.400033, X, Y) && !ellipse(41776.757965, 25167.784119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40854.050240, 27184.810000, 2028.616058, 253.577607, 88.027540, X, Y)
[Tue Apr 10 14:35:15 2012] Writing fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3.gif
[Tue Apr 10 14:35:15 2012] ../../xmm0112521101/products/events/fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0112521101/products/events/fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Apr 10 14:35:15 2012] Mean detx,y = (-11419.62, 9884.91) 
[Tue Apr 10 14:35:15 2012] ../../xmm0112521101/products/images/fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0112521101/products/images/fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Apr 10 14:35:15 2012] ../../xmm0112521101/products/spectra/fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0112521101/products/spectra/fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Apr 10 14:35:15 2012] Setting source spectrum file to fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Apr 10 14:35:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Apr 10 14:35:15 2012] ../../xmm0112521101/products/lightcurves/fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0112521101/products/lightcurves/fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Apr 10 14:35:16 2012] fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Tue Apr 10 14:35:16 2012] fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Tue Apr 10 14:35:30 2012] Updating aperture counts using extracted products
[Tue Apr 10 14:35:30 2012] Error reading totcts from fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Apr 10 14:35:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 14:35:31 2012] Using photon index=1.80, rate=0.0915, arf fullrun_mos1_xmm0112521101_pi300-10000_pass1_cl_src3.arf
[Tue Apr 10 14:35:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 14:35:31 2012] Updating source flux to 2.5e-12