[Tue Apr 10 21:23:11 2012] Detection parameters:
  Position = (300.9, 314.3) = 9 57 48.92 69 3 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.1 +/- 14.0
  Background counts = 13.1
  Rate = 0.01 +/- 0.002

[Tue Apr 10 21:23:12 2012] Off-axis axis estimate = 1.16'
[Tue Apr 10 21:23:33 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:23:33 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Tue Apr 10 21:23:33 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Tue Apr 10 21:23:33 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.01"
[Tue Apr 10 21:23:34 2012] fullrun_pn_xmm0112521001_pi300-10000_cl_pass0_src35.ximg exists
[Tue Apr 10 21:23:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521001_pi300-10000_cl_pass0_src35.csv
[Tue Apr 10 21:23:34 2012] fullrun_pn_xmm0112521001_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Apr 10 21:23:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521001_pi300-10000_cl_pass0_src35.csv
[Tue Apr 10 21:23:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112521001_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112521001_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:23:34 2012] fullrun_pn_xmm0112521001_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Apr 10 21:23:34 2012] fullrun_pn_xmm0112521001_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Apr 10 21:23:34 2012] Fit fullrun_pn_xmm0112521001_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Apr 10 21:23:43 2012] Source 35 is offset by 5.399129 and -7.187321 pixels which is larger than
2 X fitted extent = 3.029347 x 3.029347, not incorporating fit results
[Tue Apr 10 21:23:44 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:23:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:23:44 2012] Assessing source extent using major
[Tue Apr 10 21:23:44 2012] Source does appear to be extended
[Tue Apr 10 21:23:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:24:00 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:24:00 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Tue Apr 10 21:24:00 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Tue Apr 10 21:24:00 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.01"
[Tue Apr 10 21:24:00 2012] fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_src31.ximg exists
[Tue Apr 10 21:24:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_src31.csv
[Tue Apr 10 21:24:00 2012] fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue Apr 10 21:24:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_src31.csv
[Tue Apr 10 21:24:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:24:01 2012] fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue Apr 10 21:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue Apr 10 21:24:01 2012] fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue Apr 10 21:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue Apr 10 21:24:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:24:11 2012] Source 35 is offset by 5.461635 and -7.187321 pixels which is larger than
2 X fitted extent = 2.554933 x 2.554933, not incorporating fit results
[Tue Apr 10 21:24:11 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:24:11 2012] Assessing source extent using major
[Tue Apr 10 21:24:11 2012] Source does appear to be extended
[Tue Apr 10 21:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:24:24 2012] XMMSAS src. selection expression = ellipse(26129.016235, 27291.919067, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 21:24:24 2012] Not overwriting source region fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_src.reg
[Tue Apr 10 21:24:24 2012] Extracting stamp from image fullrun_pn_xmm0112521001_pi300-10000_cl_sm2.00.img.gz, (263, 277) - (338, 352)
[Tue Apr 10 21:24:24 2012] XMMSAS bgd. selection expression = annulus(26129.016235, 27291.919067, 1087.500000, 2175.000000, X, Y) && !ellipse(25644.647800, 28127.368000, 1454.637642, 1454.637642, 0.000000, X, Y) && !ellipse(24222.570054, 29135.378200, 383.027211, 383.027211, 0.000000, X, Y) && !ellipse(23674.356689, 29481.696960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28092.535400, 26644.893820, 358.752810, 358.752810, 0.000000, X, Y) && !ellipse(28354.048000, 24938.416000, 1179.832034, 1179.832034, 0.000000, X, Y)
[Tue Apr 10 21:24:24 2012] Writing fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35.gif
[Tue Apr 10 21:24:26 2012] ../../xmm0112521001/products/events/fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0112521001/products/events/fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create
[Tue Apr 10 21:24:26 2012] Mean detx,y = (38.50, 332.98) 
[Tue Apr 10 21:24:26 2012] ../../xmm0112521001/products/images/fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_src.img and ../../xmm0112521001/products/images/fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create
[Tue Apr 10 21:24:26 2012] ../../xmm0112521001/products/spectra/fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_src_b10.pi.gz and ../../xmm0112521001/products/spectra/fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create
[Tue Apr 10 21:24:26 2012] Setting source spectrum file to fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Apr 10 21:24:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue Apr 10 21:24:26 2012] ../../xmm0112521001/products/lightcurves/fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0112521001/products/lightcurves/fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create
[Tue Apr 10 21:24:28 2012] Not generating rmf since there are only 73 counts
[Tue Apr 10 21:24:28 2012] rmf not generated due to insufficient counts
[Tue Apr 10 21:24:28 2012] fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35.arf exists, delete to re-create
[Tue Apr 10 21:24:42 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:24:42 2012] Error reading totcts from fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Apr 10 21:24:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:24:42 2012] Using photon index=1.80, rate=0.0105, arf fullrun_pn_xmm0112521001_pi300-10000_pass1_cl_src35.arf
[Tue Apr 10 21:24:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:24:42 2012] Updating source flux to 2.5e-14
[Tue Apr 10 21:24:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting