[Tue Apr 10 21:23:12 2012] Detection parameters:
  Position = (360.8, 333.0) = 9 57 0.31 69 4 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.8 +/- 7.9
  Background counts = 4.1
  Rate = 0.004 +/- 0.0009

[Tue Apr 10 21:23:13 2012] Off-axis axis estimate = 5.17'
[Tue Apr 10 21:23:34 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:23:34 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Tue Apr 10 21:23:34 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.134
[Tue Apr 10 21:23:34 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.01"
[Tue Apr 10 21:23:35 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src18.ximg exists
[Tue Apr 10 21:23:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src18.csv
[Tue Apr 10 21:23:35 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Apr 10 21:23:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src18.csv
[Tue Apr 10 21:23:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:23:35 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Apr 10 21:23:35 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Apr 10 21:23:35 2012] Fit fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Apr 10 21:23:47 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.989905 pixels away
[Tue Apr 10 21:23:47 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:23:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:23:47 2012] Assessing source extent using major
[Tue Apr 10 21:23:47 2012] Source does appear to be extended
[Tue Apr 10 21:23:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:24:01 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:24:01 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Tue Apr 10 21:24:01 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.134
[Tue Apr 10 21:24:01 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 9.01"
[Tue Apr 10 21:24:01 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src14.ximg exists
[Tue Apr 10 21:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src14.csv
[Tue Apr 10 21:24:01 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue Apr 10 21:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src14.csv
[Tue Apr 10 21:24:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:24:02 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue Apr 10 21:24:02 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Apr 10 21:24:02 2012] Fit fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Apr 10 21:24:13 2012] Spatial fit model total counts = 68.999200, observed total counts = 69.000000
[Tue Apr 10 21:24:13 2012] Offset between fit and detection position for source 21 = 0.127885 pixels
[Tue Apr 10 21:24:13 2012] 70.727900 total counts/ 38.257700 bgd. counts: snr = 5.249592
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.127885 pixels
  Position = (360.9, 332.9) = 9 57 0.21 69 4 27.0
  Extent = 7.8 (4.6-11.3)", rotation angle = 0
  Source counts = 32.5 +/- 8.4
  Background counts = 38.3
  Rate = 0.003 +/- 0.0008
[Tue Apr 10 21:24:13 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:24:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:24:13 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:24:13 2012] Source does appear to be extended
[Tue Apr 10 21:24:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:24:28 2012] XMMSAS src. selection expression = ellipse(31347.873200, 28914.772400, 465.426613, 465.426613, 0.000000, X, Y)
[Tue Apr 10 21:24:28 2012] Not overwriting source region fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_src.reg
[Tue Apr 10 21:24:28 2012] Extracting stamp from image fullrun_mos1_xmm0112521001_pi300-10000_cl_sm2.00.img.gz, (334, 306) - (388, 360)
[Tue Apr 10 21:24:28 2012] XMMSAS bgd. selection expression = annulus(31347.873200, 28914.772400, 775.711022, 1551.422045, X, Y)
[Tue Apr 10 21:24:28 2012] Writing fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21.gif
[Tue Apr 10 21:24:28 2012] ../../xmm0112521001/products/events/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0112521001/products/events/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Tue Apr 10 21:24:28 2012] Mean detx,y = (-2645.06, 4728.55) 
[Tue Apr 10 21:24:28 2012] ../../xmm0112521001/products/images/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_src.img and ../../xmm0112521001/products/images/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Tue Apr 10 21:24:28 2012] ../../xmm0112521001/products/spectra/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0112521001/products/spectra/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Tue Apr 10 21:24:28 2012] Setting source spectrum file to fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Apr 10 21:24:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Apr 10 21:24:28 2012] ../../xmm0112521001/products/lightcurves/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0112521001/products/lightcurves/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Tue Apr 10 21:24:29 2012] Not generating rmf since there are only 32 counts
[Tue Apr 10 21:24:29 2012] rmf not generated due to insufficient counts
[Tue Apr 10 21:24:29 2012] fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21.arf exists, delete to re-create
[Tue Apr 10 21:24:43 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:24:43 2012] Error reading totcts from fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Apr 10 21:24:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:24:43 2012] Using photon index=1.80, rate=0.00321, arf fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src21.arf
[Tue Apr 10 21:24:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:24:43 2012] Updating source flux to 3.9e-14
[Tue Apr 10 21:24:45 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting