[Tue Apr 10 21:23:12 2012] Detection parameters:
  Position = (295.6, 323.9) = 9 57 53.24 69 3 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6875.3 +/- 99.1
  Background counts = 5.1
  Rate = 0.7 +/- 0.01

[Tue Apr 10 21:23:13 2012] Off-axis axis estimate = 1.86'
[Tue Apr 10 21:23:34 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:23:34 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Tue Apr 10 21:23:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.041
[Tue Apr 10 21:23:34 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.36"
[Tue Apr 10 21:23:34 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src2.ximg exists
[Tue Apr 10 21:23:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src2.csv
[Tue Apr 10 21:23:35 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Apr 10 21:23:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src2.csv
[Tue Apr 10 21:23:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:23:35 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Apr 10 21:23:35 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Apr 10 21:23:35 2012] Fit fullrun_mos1_xmm0112521001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Apr 10 21:23:47 2012] Spatial fit model total counts = 5906.000000, observed total counts = 5906.000000
[Tue Apr 10 21:23:47 2012] Offset between fit and detection position for source 1 = 0.225598 pixels
[Tue Apr 10 21:23:47 2012] 5938.510000 total counts/ 1166.620000 bgd. counts: snr = 139.709428
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.225598 pixels
  Position = (295.4, 323.8) = 9 57 53.41 69 3 47.8
  Extent = 5.6 (5.5-5.8)", rotation angle = 0
  Source counts = 4771.9 +/- 77.1
  Background counts = 1166.6
  Rate = 0.5 +/- 0.008
[Tue Apr 10 21:23:47 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:23:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:23:47 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:23:47 2012] Source does appear to be extended
[Tue Apr 10 21:23:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:24:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:24:01 2012] Initial guess for spatial extent in simple fitting = 5.63"
[Tue Apr 10 21:24:01 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.931
[Tue Apr 10 21:24:01 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.63"
[Tue Apr 10 21:24:01 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src2.ximg exists
[Tue Apr 10 21:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src2.csv
[Tue Apr 10 21:24:01 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Apr 10 21:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src2.csv
[Tue Apr 10 21:24:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:24:02 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Apr 10 21:24:02 2012] fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Apr 10 21:24:02 2012] Fit fullrun_mos1_xmm0112521001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Apr 10 21:24:13 2012] Warning, spatial fit 2 centroid is now closest to src. 24
[Tue Apr 10 21:24:13 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:24:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:24:13 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:24:13 2012] Source does appear to be extended
[Tue Apr 10 21:24:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:24:28 2012] Counts = 4771.890000, rescaling region sizes by 2.000000
[Tue Apr 10 21:24:28 2012] XMMSAS src. selection expression = ellipse(25648.016400, 28121.118840, 676.197619, 676.197619, 0.000000, X, Y)
[Tue Apr 10 21:24:28 2012] Not overwriting source region fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 21:24:28 2012] Extracting stamp from image fullrun_mos1_xmm0112521001_pi300-10000_cl_sm2.00.img.gz, (257, 285) - (334, 363)
[Tue Apr 10 21:24:28 2012] XMMSAS bgd. selection expression = annulus(25648.016400, 28121.118840, 2253.992065, 4507.984130, X, Y) && !ellipse(28059.068542, 26625.748322, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 21:24:28 2012] Writing fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 21:24:28 2012] ../../xmm0112521001/products/events/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112521001/products/events/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 21:24:28 2012] Mean detx,y = (449.19, -143.17) 
[Tue Apr 10 21:24:28 2012] ../../xmm0112521001/products/images/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112521001/products/images/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 21:24:28 2012] ../../xmm0112521001/products/spectra/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112521001/products/spectra/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 21:24:28 2012] Setting source spectrum file to fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 21:24:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 21:24:28 2012] ../../xmm0112521001/products/lightcurves/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112521001/products/lightcurves/fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 21:24:29 2012] fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 21:24:29 2012] fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 21:24:42 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:24:42 2012] Error reading totcts from fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 21:24:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:24:43 2012] Using photon index=1.80, rate=0.472, arf fullrun_mos1_xmm0112521001_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 21:24:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:24:43 2012] Updating source flux to 4.5e-12