[Tue May 28 22:14:46 2013] Detection parameters:
  Position = (281.1, 286.2) = 9 34 10.96 55 11 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 13.6
  Background counts = 43.4
  Rate = 0.003 +/- 0.0006

[Tue May 28 22:14:47 2013] Off-axis axis estimate = 1.54'
[Tue May 28 22:17:18 2013] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Tue May 28 22:17:18 2013] Initial guess for spatial extent in simple fitting = 7.20"
[Tue May 28 22:17:18 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Tue May 28 22:17:18 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 7.20"
[Tue May 28 22:55:54 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src18.ximg exists
[Tue May 28 22:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src18.csv
[Tue May 28 22:55:54 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue May 28 22:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src18.csv
[Tue May 28 22:55:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 22:55:54 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue May 28 22:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue May 28 22:55:54 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue May 28 22:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue May 28 22:55:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:17:16 2013] Source 18 is offset by -6.470109 and -7.415391 pixels which is larger than
2 X fitted extent = 0.827168 x 0.827168, not incorporating fit results
[Wed May 29 00:17:16 2013] Vigneting correction estimate = 1.000000
[Wed May 29 00:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 00:17:17 2013] Assessing source extent using major
[Wed May 29 00:17:17 2013] Source does appear to be extended
[Wed May 29 00:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 00:17:36 2013] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:17:36 2013] Initial guess for spatial extent in simple fitting = 7.20"
[Wed May 29 00:17:36 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Wed May 29 00:17:36 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 7.20"
[Wed May 29 01:04:49 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_src18.ximg exists
[Wed May 29 01:04:49 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed May 29 01:04:49 2013] Fit fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_src18 appears to have run properly
[Wed May 29 01:04:50 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed May 29 01:04:50 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed May 29 01:04:50 2013] Fit fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Wed May 29 02:50:44 2013] Spatial fit model total counts = 356.316000, observed total counts = 332.000000
[Wed May 29 02:50:44 2013] Offset between fit and detection position for source 18 = 0.169735 pixels
[Wed May 29 02:50:44 2013] 353.402000 total counts/ 293.872000 bgd. counts: snr = 3.472616
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.169735 pixels
  Position = (281.2, 286.1) = 9 34 10.92 55 11 41.4
  Extent = 7.7 (3.7-12.9)", rotation angle = 0
  Source counts = 59.5 +/- 18.8
  Background counts = 293.9
  Rate = 0.002 +/- 0.0007
[Wed May 29 02:50:44 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:50:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:50:44 2013] Assessing source extent using major axis lower bound
[Wed May 29 02:50:44 2013] Source does appear to be extended
[Wed May 29 02:50:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 02:51:12 2013] XMMSAS src. selection expression = ellipse(24418.147700, 24837.982200, 462.703213, 462.703213, 0.000000, X, Y)
[Wed May 29 02:51:12 2013] Writing source region out to fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src18_src.reg
[Wed May 29 02:51:12 2013] Extracting stamp from image fullrun_pn_xmm0112520101_pi300-10000_cl_sm2.00.img.gz, (255, 259) - (308, 313)
[Wed May 29 02:51:12 2013] XMMSAS bgd. selection expression = annulus(24418.147700, 24837.982200, 771.172022, 1542.344044, X, Y) && !ellipse(26322.801514, 22772.530853, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 02:51:12 2013] Writing fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src18.gif
[Wed May 29 03:09:17 2013] Mean detx,y = (-2914.58, 1571.38) 
[Wed May 29 03:09:21 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 03:09:42 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 03:09:42 2013] Setting source spectrum file to fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed May 29 03:09:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed May 29 03:35:07 2013] Not generating rmf since there are only 59 counts
[Wed May 29 03:35:07 2013] rmf not generated due to insufficient counts
[Wed May 29 04:31:40 2013] Updating aperture counts using extracted products
[Wed May 29 04:31:41 2013] Total counts from fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 170.00
[Wed May 29 04:31:41 2013] Total counts from fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 657.00
[Wed May 29 04:31:41 2013] Got source and background scale factors 670400.000000, 4352414.000000
[Wed May 29 04:31:41 2013] User source parameters:
  Position = (281.2, 286.1) = 9 34 10.92 55 11 41.4
  Extent = 7.7 (3.7-12.9)", rotation angle = 0
  Source aperture counts = 68.8 +/- 14.1
  Background aperture counts = 101.2
  Rate = 0.002 +/- 0.0005

[Wed May 29 04:31:45 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 04:31:45 2013] Using photon index=1.80, rate=0.00212, arf fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src18.arf
[Wed May 29 04:31:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 04:31:45 2013] Updating source flux to 7.4e-15
[Wed May 29 04:32:10 2013] Flag b found in src. 18 procflags, skipping spectral fitting
[Wed May 29 04:32:10 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 29 04:32:13 2013] xmm0112520101/analysis//spectral/fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete