[Tue May 28 22:14:46 2013] Detection parameters:
  Position = (298.9, 324.2) = 9 34 1.96 55 14 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2774.5 +/- 63.0
  Background counts = 44.6
  Rate = 0.1 +/- 0.002

[Tue May 28 22:14:47 2013] Off-axis axis estimate = 1.87'
[Tue May 28 22:17:18 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Tue May 28 22:17:18 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Tue May 28 22:17:18 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Tue May 28 22:17:18 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Tue May 28 22:55:53 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 28 22:55:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src1.csv
[Tue May 28 22:55:53 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 28 22:55:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src1.csv
[Tue May 28 22:55:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 22:55:54 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 28 22:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 28 22:55:54 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 28 22:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 28 22:55:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:17:16 2013] Source 1 is offset by -6.898973 and 5.951128 pixels which is larger than
2 X fitted extent = 0.846202 x 0.846202, not incorporating fit results
[Wed May 29 00:17:16 2013] Vigneting correction estimate = 1.000000
[Wed May 29 00:17:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 00:17:16 2013] Assessing source extent using major
[Wed May 29 00:17:16 2013] Source does appear to be extended
[Wed May 29 00:17:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 00:17:36 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:17:36 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Wed May 29 00:17:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Wed May 29 00:17:36 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.36"
[Wed May 29 01:04:49 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 29 01:04:49 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 29 01:04:49 2013] Fit fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed May 29 01:04:49 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 29 01:04:49 2013] fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 29 01:04:49 2013] Fit fullrun_pn_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 29 02:50:44 2013] Spatial fit model total counts = 2728.310000, observed total counts = 2639.000000
[Wed May 29 02:50:44 2013] Offset between fit and detection position for source 1 = 0.157678 pixels
[Wed May 29 02:50:44 2013] 2743.589000 total counts/ 879.579000 bgd. counts: snr = 62.850800
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.157678 pixels
  Position = (298.8, 324.3) = 9 34 2.00 55 14 27.9
  Extent = 5.8 (5.5-6.1)" x 5.3 (5.0-5.5)", rotation angle = 344 (321-3) degrees
  Source counts = 1864.0 +/- 52.4
  Background counts = 879.6
  Rate = 0.07 +/- 0.002
[Wed May 29 02:50:44 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:50:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:50:44 2013] Assessing source extent using major axis lower bound
[Wed May 29 02:50:44 2013] Source does appear to be extended
[Wed May 29 02:50:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Wed May 29 02:51:12 2013] Counts = 1864.010000, rescaling region sizes by 2.000000
[Wed May 29 02:51:12 2013] XMMSAS src. selection expression = ellipse(25945.723780, 28166.764200, 694.888820, 631.245618, 343.585617, X, Y)
[Wed May 29 02:51:12 2013] Writing source region out to fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src1_src.reg
[Wed May 29 02:51:12 2013] Extracting stamp from image fullrun_pn_xmm0112520101_pi300-10000_cl_sm2.00.img.gz, (259, 284) - (339, 364)
[Wed May 29 02:51:12 2013] XMMSAS bgd. selection expression = annulus(25945.723780, 28166.764200, 2316.296067, 4632.592133, X, Y) && !ellipse(26407.850067, 29814.332306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30382.617432, 33436.809143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30310.525421, 28730.262604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24418.147700, 24837.982200, 616.937618, 616.937618, 0.000000, X, Y) && !ellipse(27567.946533, 22933.287567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26322.801514, 22772.530853, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 02:51:12 2013] Writing fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src1.gif
[Wed May 29 02:51:33 2013] Mean detx,y = (207.69, -391.38) 
[Wed May 29 02:51:41 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 02:53:06 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 02:53:07 2013] Setting source spectrum file to fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 29 02:53:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 29 04:31:35 2013] Updating aperture counts using extracted products
[Wed May 29 04:31:35 2013] Total counts from fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2520.00
[Wed May 29 04:31:35 2013] Total counts from fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 6049.00
[Wed May 29 04:31:35 2013] Got source and background scale factors 1348858.000000, 39506304.000000
[Wed May 29 04:31:35 2013] User source parameters:
  Position = (298.8, 324.3) = 9 34 2.00 55 14 27.9
  Extent = 5.8 (5.5-6.1)" x 5.3 (5.0-5.5)", rotation angle = 344 (321-3) degrees
  Source aperture counts = 2313.5 +/- 51.2
  Background aperture counts = 206.5
  Rate = 0.08 +/- 0.002

[Wed May 29 04:31:44 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 04:31:44 2013] Using photon index=1.80, rate=0.0662, arf fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src1.arf
[Wed May 29 04:31:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 04:31:44 2013] Updating source flux to 1.9e-13
[Wed May 29 04:32:10 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Wed May 29 04:32:13 2013] xmm0112520101/analysis//spectral/fullrun_pn_xmm0112520101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete