[Tue May 28 22:15:34 2013] Detection parameters:
  Position = (370.0, 271.7) = 9 33 25.83 55 10 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.6 +/- 8.7
  Background counts = 11.7
  Rate = 0.003 +/- 0.0005

[Tue May 28 22:15:34 2013] Off-axis axis estimate = 5.54'
[Tue May 28 23:36:26 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Tue May 28 23:36:26 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Tue May 28 23:36:26 2013] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.805
[Tue May 28 23:36:26 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 9.20"
[Wed May 29 00:17:10 2013] fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_src9.ximg exists
[Wed May 29 00:17:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_src9.csv
[Wed May 29 00:17:10 2013] fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May 29 00:17:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_src9.csv
[Wed May 29 00:17:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:17:10 2013] fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May 29 00:17:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May 29 00:17:10 2013] fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May 29 00:17:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May 29 00:17:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:17:26 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.062695 pixels away
[Wed May 29 00:17:26 2013] Vigneting correction estimate = 1.000000
[Wed May 29 00:17:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 00:17:26 2013] Assessing source extent using major
[Wed May 29 00:17:26 2013] Source does appear to be extended
[Wed May 29 00:17:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:58:04 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Wed May 29 01:58:04 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Wed May 29 01:58:04 2013] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.805
[Wed May 29 01:58:04 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 9.20"
[Wed May 29 02:50:35 2013] fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 29 02:50:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_src9.csv
[Wed May 29 02:50:35 2013] fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 29 02:50:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_src9.csv
[Wed May 29 02:50:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:50:36 2013] fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 29 02:50:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed May 29 02:50:36 2013] fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 29 02:50:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed May 29 02:50:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:50:59 2013] Source 23 is offset by -0.558134 and -1.468553 pixels which is larger than
2 X fitted extent = 4.422396 x 1.057292, not incorporating fit results
[Wed May 29 02:50:59 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:50:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:50:59 2013] Assessing source extent using major
[Wed May 29 02:50:59 2013] Source does appear to be extended
[Wed May 29 02:50:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 04:04:21 2013] XMMSAS src. selection expression = ellipse(32142.434570, 23588.057617, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 04:04:21 2013] Writing source region out to fullrun_mos2_xmm0112520101_pi300-10000_pass1_cl_src23_src.reg
[Wed May 29 04:04:21 2013] Extracting stamp from image fullrun_mos2_xmm0112520101_pi300-10000_cl_sm2.00.img.gz, (333, 234) - (408, 309)
[Wed May 29 04:04:21 2013] XMMSAS bgd. selection expression = annulus(32142.434570, 23588.057617, 1087.500000, 2175.000000, X, Y)
[Wed May 29 04:04:21 2013] Writing fullrun_mos2_xmm0112520101_pi300-10000_pass1_cl_src23.gif
[Wed May 29 04:07:35 2013] Mean detx,y = (-2765.42, -7019.67) 
[Wed May 29 04:07:37 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 04:07:59 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 04:07:59 2013] Setting source spectrum file to fullrun_mos2_xmm0112520101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed May 29 04:07:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112520101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed May 29 04:28:48 2013] Not generating rmf since there are only 46 counts
[Wed May 29 04:28:48 2013] rmf not generated due to insufficient counts
[Wed May 29 04:31:53 2013] Updating aperture counts using extracted products
[Wed May 29 04:31:53 2013] Total counts from fullrun_mos2_xmm0112520101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 99.00
[Wed May 29 04:31:54 2013] Total counts from fullrun_mos2_xmm0112520101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 555.00
[Wed May 29 04:31:54 2013] Got source and background scale factors 1027238.000000, 10201619.000000
[Wed May 29 04:31:54 2013] User source parameters:
  Position = (370.0, 271.7) = 9 33 25.83 55 10 43.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 43.1 +/- 11.0
  Background aperture counts = 55.9
  Rate = 0.001 +/- 0.0003

[Wed May 29 04:31:54 2013] Updating counts from extracted products
[Wed May 29 04:31:54 2013] Set source signif. to 43.12/7.48 = 5.77
[Wed May 29 04:31:57 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 04:31:57 2013] Using photon index=1.80, rate=0.00135, arf fullrun_mos2_xmm0112520101_pi300-10000_pass1_cl_src23.arf
[Wed May 29 04:31:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 04:31:57 2013] Updating source flux to 2.6e-14
[Wed May 29 04:32:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 04:32:10 2013] xmm0112520101/analysis//spectral/fullrun_mos2_xmm0112520101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete