[Tue May 28 22:15:10 2013] Detection parameters:
  Position = (294.9, 140.9) = 9 34 3.97 55 1 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.8 +/- 8.5
  Background counts = 7.9
  Rate = 0.001 +/- 0.0003

[Tue May 28 22:15:10 2013] Off-axis axis estimate = 11.42'
[Tue May 28 22:55:54 2013] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Tue May 28 22:55:54 2013] Initial guess for spatial extent in simple fitting = 12.14"
[Tue May 28 22:55:54 2013] source mask rpix=2.8, npix_max = 43, mask sum = 35, frac = 0.808
[Tue May 28 22:55:54 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 12.14"
[Tue May 28 23:36:26 2013] fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_src27.ximg exists
[Tue May 28 23:36:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_src27.csv
[Tue May 28 23:36:26 2013] fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue May 28 23:36:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_src27.csv
[Tue May 28 23:36:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 23:36:26 2013] fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue May 28 23:36:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue May 28 23:36:26 2013] fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue May 28 23:36:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue May 28 23:36:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112520101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:17:22 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 11.319121 pixels away
[Wed May 29 00:17:22 2013] Vigneting correction estimate = 1.000000
[Wed May 29 00:17:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 00:17:22 2013] Assessing source extent using major
[Wed May 29 00:17:22 2013] Source does appear to be extended
[Wed May 29 00:17:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:04:50 2013] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Wed May 29 01:04:50 2013] Initial guess for spatial extent in simple fitting = 12.14"
[Wed May 29 01:04:50 2013] source mask rpix=2.8, npix_max = 43, mask sum = 35, frac = 0.808
[Wed May 29 01:04:50 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 12.14"
[Wed May 29 01:58:03 2013] fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_src26.ximg exists
[Wed May 29 01:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_src26.csv
[Wed May 29 01:58:03 2013] fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed May 29 01:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_src26.csv
[Wed May 29 01:58:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:58:04 2013] fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed May 29 01:58:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed May 29 01:58:04 2013] fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed May 29 01:58:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed May 29 01:58:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112520101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:50:51 2013] Spatial fit model total counts = 123.441000, observed total counts = 105.000000
[Wed May 29 02:50:51 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 02:50:51 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:50:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:50:51 2013] Assessing source extent using major
[Wed May 29 02:50:51 2013] Source does appear to be extended
[Wed May 29 02:50:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:38:02 2013] XMMSAS src. selection expression = ellipse(25607.648132, 12213.547043, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 03:38:02 2013] Writing source region out to fullrun_mos1_xmm0112520101_pi300-10000_pass1_cl_src28_src.reg
[Wed May 29 03:38:02 2013] Extracting stamp from image fullrun_mos1_xmm0112520101_pi300-10000_cl_sm2.00.img.gz, (257, 103) - (332, 178)
[Wed May 29 03:38:02 2013] XMMSAS bgd. selection expression = annulus(25607.648132, 12213.547043, 1087.500000, 2175.000000, X, Y)
[Wed May 29 03:38:02 2013] Writing fullrun_mos1_xmm0112520101_pi300-10000_pass1_cl_src28.gif
[Wed May 29 03:47:56 2013] Mean detx,y = (-12680.11, -9068.94) 
[Wed May 29 03:47:58 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 03:48:22 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 03:48:22 2013] Setting source spectrum file to fullrun_mos1_xmm0112520101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed May 29 03:48:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112520101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed May 29 04:04:07 2013] Not generating rmf since there are only 40 counts
[Wed May 29 04:04:07 2013] rmf not generated due to insufficient counts
[Wed May 29 04:31:51 2013] Updating aperture counts using extracted products
[Wed May 29 04:31:51 2013] Total counts from fullrun_mos1_xmm0112520101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 81.00
[Wed May 29 04:31:51 2013] Total counts from fullrun_mos1_xmm0112520101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 233.00
[Wed May 29 04:31:51 2013] Got source and background scale factors 1136144.000000, 6016359.000000
[Wed May 29 04:31:51 2013] User source parameters:
  Position = (294.9, 140.9) = 9 34 3.97 55 1 9.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 37.0 +/- 10.0
  Background aperture counts = 44.0
  Rate = 0.001 +/- 0.0003

[Wed May 29 04:31:51 2013] Updating counts from extracted products
[Wed May 29 04:31:51 2013] Set source signif. to 37.00/6.63 = 5.58
[Wed May 29 04:31:52 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 04:31:52 2013] Using photon index=1.80, rate=0.00116, arf fullrun_mos1_xmm0112520101_pi300-10000_pass1_cl_src28.arf
[Wed May 29 04:31:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 04:31:52 2013] Updating source flux to 3.6e-14
[Wed May 29 04:31:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 04:32:04 2013] xmm0112520101/analysis//spectral/fullrun_mos1_xmm0112520101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete