[Thu Aug  9 17:14:32 2012] Detection parameters:
  Position = (315.6, 362.5) = 2 56 5.26 19 26 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.4 +/- 15.3
  Background counts = 23.8
  Rate = 0.004 +/- 0.0008

[Thu Aug  9 17:14:32 2012] Off-axis axis estimate = 4.81'
[Thu Aug  9 17:35:17 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 17:35:17 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Thu Aug  9 17:35:17 2012] source mask rpix=2.0, npix_max = 25, mask sum = 16, frac = 0.625
[Thu Aug  9 17:35:17 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.83"
[Thu Aug  9 17:57:07 2012] fullrun_mos1_xmm0112510301_pi300-10000_cl_pass0_src10.ximg exists
[Thu Aug  9 17:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112510301_pi300-10000_cl_pass0_src10.csv
[Thu Aug  9 17:57:07 2012] fullrun_mos1_xmm0112510301_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Aug  9 17:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112510301_pi300-10000_cl_pass0_src10.csv
[Thu Aug  9 17:57:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112510301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112510301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 17:57:07 2012] fullrun_mos1_xmm0112510301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Aug  9 17:57:07 2012] fullrun_mos1_xmm0112510301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Aug  9 17:57:07 2012] Fit fullrun_mos1_xmm0112510301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Aug  9 18:16:13 2012] Spatial fit model total counts = 3243.820000, observed total counts = 3167.000000
[Thu Aug  9 18:16:13 2012] Offset between fit and detection position for source 11 = 7.441226 pixels
[Thu Aug  9 18:16:13 2012] 1124.634000 total counts/ 921.062000 bgd. counts: snr = 6.707700
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 7.441226 pixels
  Position = (322.0, 358.7) = 2 56 3.29 19 26 13.5
  Extent = 17.7 (12.4-35.3)", rotation angle = 0
  Source counts = 203.6 +/- 33.5
  Background counts = 921.1
  Rate = 0.007 +/- 0.001
[Thu Aug  9 18:16:13 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 18:16:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 18:16:13 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 18:16:13 2012] Source does appear to be extended
[Thu Aug  9 18:16:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 18:30:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 18:30:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  9 18:30:19 2012] Initial guess for spatial extent in simple fitting = 17.67"
[Thu Aug  9 18:30:19 2012] source mask rpix=4.1, npix_max = 83, mask sum = 40, frac = 0.481
[Thu Aug  9 18:30:19 2012] Skipping simple spatial due to low active detector fraction
[Thu Aug  9 19:15:44 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 19:15:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 19:15:44 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 19:15:44 2012] Source does appear to be extended
[Thu Aug  9 19:15:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 19:42:34 2012] XMMSAS src. selection expression = ellipse(27967.068000, 31160.446000, 1059.912030, 1059.912030, 0.000000, X, Y)
[Thu Aug  9 19:42:34 2012] Writing source region out to fullrun_mos1_xmm0112510301_pi300-10000_pass1_cl_src11_src.reg
[Thu Aug  9 19:42:34 2012] Extracting stamp from image fullrun_mos1_xmm0112510301_pi300-10000_cl_sm2.00.img.gz, (261, 298) - (383, 420)
[Thu Aug  9 19:42:35 2012] XMMSAS bgd. selection expression = annulus(27967.068000, 31160.446000, 1766.520051, 3533.040102, X, Y) && !ellipse(26602.977000, 31524.194000, 564.643216, 564.643216, 0.000000, X, Y) && !ellipse(31374.275680, 31280.656000, 395.531211, 395.531211, 0.000000, X, Y) && !ellipse(26175.341187, 30985.322357, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  9 19:42:35 2012] Writing fullrun_mos1_xmm0112510301_pi300-10000_pass1_cl_src11.gif
[Thu Aug  9 19:47:17 2012] Mean detx,y = (4247.75, -1055.40) 
[Thu Aug  9 19:47:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 19:48:01 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 19:48:01 2012] Setting source spectrum file to fullrun_mos1_xmm0112510301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Aug  9 19:48:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112510301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Aug  9 20:14:58 2012] Updating aperture counts using extracted products
[Thu Aug  9 20:14:58 2012] Error reading totcts from fullrun_mos1_xmm0112510301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Aug  9 20:14:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 20:14:59 2012] Using photon index=1.80, rate=0.00702, arf fullrun_mos1_xmm0112510301_pi300-10000_pass1_cl_src11.arf
[Thu Aug  9 20:14:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 20:14:59 2012] Updating source flux to 7.7e-14