[Sat Jun 22 09:22:57 2013] Detection parameters:
  Position = (279.2, 350.8) = 17 4 5.10 78 43 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 306.0 +/- 29.4
  Background counts = 234.6
  Rate = 0.03 +/- 0.003

[Sat Jun 22 09:22:57 2013] Off-axis axis estimate = 4.04'
[Sat Jun 22 09:24:03 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:03 2013] Initial guess for spatial extent in simple fitting = 8.45"
[Sat Jun 22 09:24:03 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.048
[Sat Jun 22 09:24:03 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 8.45"
[Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src59.ximg exists
[Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src59.csv
[Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src59_1.ximg exists
[Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src59.csv
[Sat Jun 22 09:24:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:07 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sat Jun 22 09:24:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src59.csv
[Sat Jun 22 09:24:07 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sat Jun 22 09:24:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src59.csv
[Sat Jun 22 09:24:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:42 2013] Spatial fit model total counts = 1944.900000, observed total counts = 1720.000000
[Sat Jun 22 09:24:42 2013] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 09:24:42 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:24:42 2013] Assessing source extent using major
[Sat Jun 22 09:24:42 2013] Source does appear to be extended
[Sat Jun 22 09:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:25:48 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:48 2013] Initial guess for spatial extent in simple fitting = 8.45"
[Sat Jun 22 09:25:48 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.048
[Sat Jun 22 09:25:48 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 8.45"
[Sat Jun 22 09:25:50 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src52.ximg exists
[Sat Jun 22 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src52.csv
[Sat Jun 22 09:25:51 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src52_1.ximg exists
[Sat Jun 22 09:25:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src52.csv
[Sat Jun 22 09:25:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:52 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sat Jun 22 09:25:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat Jun 22 09:25:52 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sat Jun 22 09:25:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat Jun 22 09:25:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:26:22 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 12.807952 pixels away
[Sat Jun 22 09:26:22 2013] Spatial fit model total counts = 1944.900000, observed total counts = 1720.000000
[Sat Jun 22 09:26:22 2013] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 09:26:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:22 2013] Assessing source extent using major
[Sat Jun 22 09:26:22 2013] Source does appear to be extended
[Sat Jun 22 09:26:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:27:15 2013] XMMSAS src. selection expression = ellipse(24240.862946, 30468.733307, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 09:27:15 2013] Not overwriting source region fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src60_src.reg
[Sat Jun 22 09:27:15 2013] Extracting stamp from image fullrun_pn_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (242, 313) - (317, 388)
[Sat Jun 22 09:27:15 2013] XMMSAS bgd. selection expression = annulus(24240.862946, 30468.733307, 1087.500000, 2175.000000, X, Y) && !ellipse(24900.033600, 28234.228000, 1051.264030, 1051.264030, 0.000000, X, Y) && !ellipse(26489.909058, 27867.526764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26035.228000, 27640.416800, 1149.656033, 1149.656033, 0.000000, X, Y) && !ellipse(23968.815369, 27880.963867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25607.467590, 27705.498291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22988.469696, 27452.373108, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 09:27:15 2013] Writing fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src60.gif
[Sat Jun 22 09:30:36 2013] Mean detx,y = (2520.76, 4664.17) 
[Sat Jun 22 09:30:41 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 09:31:25 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 09:31:26 2013] Setting source spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat Jun 22 09:31:26 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sat Jun 22 10:46:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 10:46:22 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:06 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:06 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 1333.00
[Sat Jun 22 13:58:06 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src60_bgd.pi.gz = 7283.00
[Sat Jun 22 13:58:06 2013] Got source and background scale factors 1241600.000000, 8571393.000000
[Sat Jun 22 13:58:06 2013] User source parameters:
  Position = (279.2, 350.8) = 17 4 5.10 78 43 5.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 278.0 +/- 37.5
  Background aperture counts = 1055.0
  Rate = 0.03 +/- 0.004

[Sat Jun 22 13:58:06 2013] Updating counts from extracted products
[Sat Jun 22 13:58:06 2013] Set source signif. to 278.03/32.48 = 8.56
[Sat Jun 22 13:58:09 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:09 2013] Using photon index=1.80, rate=0.0294, arf fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src60.arf
[Sat Jun 22 13:58:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:09 2013] Updating source flux to 1.1e-13
[Sat Jun 22 13:58:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:59:00 2013] xmm0112500201/analysis//spectral/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete