[Sat Jun 22 09:22:56 2013] Detection parameters:
  Position = (239.2, 281.8) = 17 5 3.78 78 38 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.0 +/- 28.4
  Background counts = 398.7
  Rate = 0.03 +/- 0.004

[Sat Jun 22 09:22:57 2013] Off-axis axis estimate = 4.46'
[Sat Jun 22 09:24:03 2013] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:24:03 2013] Initial guess for spatial extent in simple fitting = 8.66"
[Sat Jun 22 09:24:03 2013] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.846
[Sat Jun 22 09:24:03 2013] Giving source the simple spatial ID 58 for pass 0, mean size = 8.66"
[Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src58.ximg exists
[Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src58.csv
[Sat Jun 22 09:24:05 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src58_1.ximg exists
[Sat Jun 22 09:24:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src58.csv
[Sat Jun 22 09:24:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:07 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sat Jun 22 09:24:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sat Jun 22 09:24:07 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sat Jun 22 09:24:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sat Jun 22 09:24:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:24:42 2013] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 11.550472 pixels away
[Sat Jun 22 09:24:42 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:24:42 2013] Assessing source extent using major
[Sat Jun 22 09:24:42 2013] Source does appear to be extended
[Sat Jun 22 09:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:24:42 2013] Source is confused with source 51
[Sat Jun 22 09:25:48 2013] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:25:48 2013] Initial guess for spatial extent in simple fitting = 8.66"
[Sat Jun 22 09:25:48 2013] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.846
[Sat Jun 22 09:25:48 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 8.66"
[Sat Jun 22 09:25:50 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src51.ximg exists
[Sat Jun 22 09:25:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src51.csv
[Sat Jun 22 09:25:50 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat Jun 22 09:25:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src51.csv
[Sat Jun 22 09:25:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:25:52 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat Jun 22 09:25:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat Jun 22 09:25:52 2013] fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat Jun 22 09:25:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat Jun 22 09:25:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112500201_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:26:22 2013] Spatial fit model total counts = 3523.430000, observed total counts = 2534.000000
[Sat Jun 22 09:26:22 2013] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 09:26:22 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 11.550472 pixels away
[Sat Jun 22 09:26:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 09:26:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 09:26:22 2013] Assessing source extent using major
[Sat Jun 22 09:26:22 2013] Source does appear to be extended
[Sat Jun 22 09:26:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 09:27:15 2013] XMMSAS src. selection expression = ellipse(20760.649216, 24466.078461, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 09:27:15 2013] Not overwriting source region fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src59_src.reg
[Sat Jun 22 09:27:15 2013] Extracting stamp from image fullrun_pn_xmm0112500201_pi300-10000_cl_sm2.00.img.gz, (202, 244) - (277, 319)
[Sat Jun 22 09:27:15 2013] XMMSAS bgd. selection expression = annulus(20760.649216, 24466.078461, 1087.500000, 2175.000000, X, Y) && !ellipse(21934.121719, 23176.708618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22988.469696, 27452.373108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21435.055862, 23619.023224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23038.049713, 26942.870331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22045.036896, 26592.475494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.335907, 26324.179474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20476.339386, 23802.937103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22925.898621, 25861.949493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23913.726000, 25439.486000, 999.136029, 999.136029, 0.000000, X, Y) && !ellipse(21105.809662, 24865.795776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23774.002594, 24758.572418, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 09:27:15 2013] Writing fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src59.gif
[Sat Jun 22 09:29:22 2013] Mean detx,y = (2657.29, -2242.23) 
[Sat Jun 22 09:29:27 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 09:30:15 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 09:30:16 2013] Setting source spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Sat Jun 22 09:30:16 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Sat Jun 22 10:46:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 10:46:00 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:58:05 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:58:05 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 1896.00
[Sat Jun 22 13:58:06 2013] Total counts from fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src59_bgd.pi.gz = 8386.00
[Sat Jun 22 13:58:06 2013] Got source and background scale factors 1042726.000000, 6083787.000000
[Sat Jun 22 13:58:06 2013] User source parameters:
  Position = (239.2, 281.8) = 17 5 3.78 78 38 13.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 458.7 +/- 44.6
  Background aperture counts = 1437.3
  Rate = 0.05 +/- 0.005

[Sat Jun 22 13:58:06 2013] Updating counts from extracted products
[Sat Jun 22 13:58:06 2013] Set source signif. to 458.69/37.91 = 12.10
[Sat Jun 22 13:58:09 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:58:09 2013] Using photon index=1.80, rate=0.0484, arf fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src59.arf
[Sat Jun 22 13:58:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:58:09 2013] Updating source flux to 1.8e-13
[Sat Jun 22 13:58:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:59:00 2013] xmm0112500201/analysis//spectral/fullrun_pn_xmm0112500201_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete